Table of Contents
Advertisement
DIR-820 AC1200 Wave 2 MU-MIMO Wi-Fi Router
User Manual
Figure 118. The window for changing the settings of the router's port.
In the opened window, specify the needed parameters:
Parameter
Speed
Data transfer mode.
Select the
Auto
value to enable autonegotiation.
selected, the Autonegotiation Modes and Flow control sections
are displayed.
Select the 10M-Half, 10M-Full, 100M-Half, or 100M-Full value
to manually configure speed and duplex mode for the selected port.
10M-Half: Data transfer in just
•
can be
either sent or
of up to 10Mbps.
10M-Full:
Data transfer in two directions simultaneously
•
(data can be sent and received at the same time)
maximum possible
100M-Half: Data transfer in just
•
can be
either sent or
of up to
100Mbps.
100M-Full:
Data transfer in two directions simultaneously
•
(data can be sent and received at the same time)
maximum possible
Page 149 of 210
Configuring via Web-based Interface
Description
one direction at a time
received) at the maximum possible
rate
of up to
10Mbps.
one direction at a time
received)
at the maximum possible
rate
of up to
100Mbps.
When this value is
(data
rate
at the
(data
rate
at the
Advertisement
Table of Contents
