Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZWF744B3PW
Summary of Contents for Zanussi ZWF744B3PW
- Page 1 User Manual GETTING STARTED? EASY. ZWF744B3PW EN User Manual Washing Machine...
-
Page 2: Safety Information
VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before beginning the installation and use of this appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. -
Page 3: Safety Instructions
This appliance is designed for single household domestic use • in an indoor environment. This appliance may be used in, offices, hotel guest rooms, bed • & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels. -
Page 4: Electrical Connection
• Do not install or use the appliance where the • Before connection to new pipes, pipes not used temperature can be less than 0°C or where it is for a long time, where repair work has been exposed to the weather. carried out or new devices fitted (water meters, •... -
Page 5: Product Description
seals, door locking assembly, plastic peripherals DISPOSAL such as detergent dispensers. Please note that WARNING! Risk of injury or some of these spare parts are only available to suffocation. professional repairers, and that not all spare parts are relevant for all models. •... -
Page 6: Technical Data
The rating plate reports the model name (A), product number (B),electrical ratings (C) and se- rial number (D). Mod. xxxxxxxxx Prod.No. 910000000 00 000V ~ 00Hz 0000 W 00000000 TECHNICAL DATA Dimension Width/ Height/ Total depth 59,6 cm /84,7 cm /57,7 cm Electrical connection Voltage 230-240 V... -
Page 7: Information For Installation
INFORMATION FOR INSTALLATION CAUTION! Do not lay washing machine on its front. Positioning and levelling Adjust the appliance correctly to prevent vibration, 3. Put the appliance back into an upright position. noise and movement of the appliance when it Remove the power supply cable and the drain operates. - Page 8 The drain hose should stay at a height of no less 4. To a stand pipe with vent hole - Insert the drain than 60 cm and not more than 100 cm. hose directly into a drain pipe. Refer to the illustration.
-
Page 9: Installation On Suspended Flooring
FIXING PLATE KIT If you install the appliance on a plinth that is not an accessory supplied by ZANUSSI, secure the appliance in the fixing plates. Read carefully the instructions supplied with the accessory. -
Page 10: Special Features
CONTROL PANEL SPECIAL FEATURES off the clothes to be drained out with the water, in such a way that there is no need to access this Your new washing machine meets all modern area for regular maintenance and cleaning. Refer to requirements for an effective treatment of laundry chapter 'Care and Cleaning' for best maintenance with low water, energy and detergent consumption... -
Page 11: Programme Chart
DISPLAY A. The time area: • Programme time. • The alarm codes. Refer to the chapter “Troubleshooting” for their description. • The level of the FlexiTime B. The Delay Start indicator. C. The Child Lock indicator. D. The Door Lock indicator: •... - Page 12 Reference spin Programme speed Maximum Programme description Default temperature Spin speed load (Type of load and level of soiling) Temperature range range Sportswear 1200 rpm 3 kg Synthetic and delicate items. Lightly soiled 30 °C (1200- 800 items or items to refresh. 40°C - Cold rpm) Spin/Drain...
- Page 13 Programme options compatibility Programme ■ ■ ■ ■ ■ ■ ■ Eco 40-60 ■ ■ ■ ■ ■ ■ ■ ■ ■ Cottons ■ ■ ■ ■ ■ ■ ■ ■ ■ Synthetics ■ ■ ■ ■ ■ ■ ■ Delicates ■...
-
Page 14: Extra Rinse
Universal pow- Liquid for col- Delicates Programme Liquid Universal Special oureds woollens ▲ ▲ ▲ Dark Colours ▲ ▲ ▲ CleanBoost ▲ ▲ 14min Refresh ▲ ▲ 30min Rapid ▲ ▲ ▲ 60min EasyWash 1) At temperature higher than 60 °C the use of powder detergent is recommended. ▲... - Page 15 NIGHT Touch FlexiTime button to reduce the programme duration according to your needs. The display The intermediate and the final spinning phases are shows the new programme duration and a number suppressed and the programme ends with water in of dashes will decrease accordingly: the drum.
-
Page 16: Before First Use
BEFORE FIRST USE 1. Connect the mains plug to the mains socket. During installation or before first use 2. Open the water tap. you may observe some water in the 3. Put a small quantity of detergent in the appliance. This is residual water left in compartment for washing phase. -
Page 17: Filling The Detergent And Additives
FILLING THE DETERGENT AND ADDITIVES Compartment for washing phase. If you use liquid detergent, put it immediately before you start the programme. Compartment for liquid additives (fabric conditioner, starch). Maximum level for quantity of liquid additives. Flap for powder or liquid deter- gent. -
Page 18: Starting A Programme Without The Delay Start
• The display shows the level of the Time Manager, the programme duration and the indicators of the phases of the programme. 2. If necessary, change the temperature and the spin speed or add available options. When you activate an option, the indicator of the set option comes on. -
Page 19: Interrupting A Programme And Changing The Options
THE AUTOSENSE SYSTEM LOAD 3. You can open the door. DETECTION 4. Close the door and press the again. The delay start continues to operate. After touching the Start/Pause button: 1. The AutoSense System starts estimating the OPENING THE DOOR WHEN THE weight of the load to calculate the real PROGRAMME OPERATES programme duration. -
Page 20: Hints And Tips
• All indicators and the display go off. The appliance drains and spins • The indicator of the flashes slowly automatically after approximately 18 • Press one of the options to deactivate the hours (except for Wool programme). energy saving status. STAND-BY If you set a programme or an option that ends with water in the drum, the... -
Page 21: Water Hardness
detergents containing bleach for whites and • Normally soiled laundry may be washed laundry sanitization, without prewash in order to save detergent, – liquid detergents, preferably for low water and time (the environment is protected temperature wash programmes (60 °C max) too!). - Page 22 drum and the tub. This could generate bad odours Clean drum Every two months and mildew. To eliminate these deposits and clean the inner part of the appliance, run a maintenance Clean detergent dis- Every two months wash regularly (at least once a month). penser Clean the inlet hose Twice a year...
-
Page 23: Cleaning The Detergent Dispenser
CLEANING THE DETERGENT DISPENSER CLEANING THE INLET HOSE AND THE VALVE FILTER... -
Page 24: Frost Precautions
45° 20° FROST PRECAUTIONS 5. When the drain pump is empty, install the inlet hose again. If the appliance is installed in an area where the temperature can be less than 0° C, remove the WARNING! Make sure that the remaining water from the inlet hose and the drain temperature is higher than 0 °C before pump. - Page 25 Values and programme duration may differ depending on different conditions (e.g. room tem- perature, water temperature and pressure, load size and type of laundry, supply voltage) and also if you change the default setting of a programme. ACCORDING TO UK ECODESIGN FOR ENERGY-RELATED PRODUCTS AND ENERGY INFORMATION REGULATIONS Eco 40-60 pro-...
-
Page 26: Troubleshooting
Programme Litres hh:mm °C Wool 0.30 65.0 1:05 30.00 1200 30°C 1) Reference indicator of the spin speed. 2) Suitable for washing heavily soiled textiles. 3) Suitable for washing lightly soiled cottons, synthetic and mixed fabrics. 4) It also performs as quick washing cycle for lightly soiled laundry. TROUBLESHOOTING WARNING! Refer to Safety chapters. - Page 27 • The programme was not finished properly or the appliance stopped too early. Switch the appliance off and on again. Internal fail. No commu- • If the alarm code appears again, contact the Authorised Service Cen- nication between elec- tre. tronic elements of the appliance.
-
Page 28: Environmental Concerns
Problem Possible solution The programme dura- • The AutoSense System is able to adjust the programme duration ac- tion increases or de- cording to the type and the laundry load size. Refer to "The AutoSense creases during pro- System load detection" in "Daily Use" chapter. gramme execution. - Page 32 WWW.ZANUSSI.COM/SHOP...