Related Manuals for Bosch Rexroth CytroPac
Summary of Contents for Bosch Rexroth CytroPac
- Page 1 Operating instructions Hydraulic power unit CytroPac RE 51055-B, Edition: 07.2022, Replaces: 10/2017, EN...
- Page 2 It must be remembered that our products are subject to a natural process of wear and aging. © All rights are reserved to Bosch Rexroth AG, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
-
Page 3: Table Of Contents
7.5.1 "Basic" sensor technology version ............ 36 7.5.2 "Premium" and "Premium M12" sensor technology versions .... 36 Description of the electrical interfaces ............ 37 7.6.1 General information ................. 37 7.6.2 All configurations .................. 37 7.6.3 "Basic" configuration ................ 41 7.6.4 "Premium" and "Premium M12" configurations ......... 46 RE 51055-B, Edition 07.2022, Bosch Rexroth AG... - Page 4 List of addresses .................. 72 17.2 Declaration of incorporation .............. 73 17.2.1 Annex to the declaration of incorporation .......... 74 17.3 Prohibited substances - REACH, RoHS, WEEE .......... 75 17.4 Additional document for UL listing ............ 76 Alphabetical index ������������������������������������������������������������������������������� 78 Bosch Rexroth AG, Edition 07.2022, RE 51055-B...
-
Page 5: About This Documentation
Assembly, commissioning and maintenance of hydraulic systems 07900 Data sheet General information on assembly, commissioning and maintenance of hydraulic systems. External gear pump SILENCE, AZPS 10095 Data sheet Includes technical data, operating conditions, performance limits and project planning information RE 51055-B, Edition 07.2022, Bosch Rexroth AG... -
Page 6: Representation Of Information
Indicates a dangerous situation which may cause death or WARNING severe injury if not avoided. Indicates a dangerous situation which may cause minor or CAUTION medium personal injury if not avoided. Damage to property: The product or the environment could NOTICE be damaged. Bosch Rexroth AG, Edition 07.2022, RE 51055-B... - Page 7 1�3�3 Abbreviations The following abbreviations are used in this documentation: Table 4: Abbreviations Abbreviation Meaning Power unit construction Bosch Rexroth Pressure relief valve Multi-Ethernet platform Size Protective Earth Rexroth document in English language REXXXXXX-B Rexroth operating instructions RE 51055-B, Edition 07.2022, Bosch Rexroth AG...
-
Page 8: About This Chapter
The hydraulic power unit is not considered to be a safety component in the sense of the EC Machinery Directive 2006/42/EC. The hydraulic power unit must not exceed the operating conditions and performance limits specified in the technical data. Bosch Rexroth AG, Edition 07.2022, RE 51055-B... -
Page 9: Improper Use
2�3 Improper use Any use deviating from the intended use is improper and thus not admissible. Bosch Rexroth AG does not assume any liability for damage caused by improper use. The user assumes all risks involved with improper use. The hydraulic power unit is not suitable for operation in explosive environments. -
Page 10: General Safety Instructions
• Only persons who have been authorized by the machine end-user may be granted access to the direct operating range of the machine/system. This also applies during any standstill of the machine/system. Bosch Rexroth AG, Edition 07.2022, RE 51055-B... -
Page 11: Product- And Technology-Dependent Safety Instructions
▶ When dealing with hydraulic fluids, you must imperatively observe the manufacturer’s information. ▶ Make sure that the grounding (electric welding circuit) during welding works at the system is not lead via the hydraulic power unit. RE 51055-B, Edition 07.2022, Bosch Rexroth AG... - Page 12 ▶ Provide for proper, safe PE connection. Overheating of electric lines and components or short-circuit! Danger to life! Risk of injury! Risk of fire! ▶ Observe the operating conditions and performance limits and safeguards specified in the technical data. Bosch Rexroth AG, Edition 07.2022, RE 51055-B...
- Page 13 ▶ Make sure that the personnel specified above is prevented from accessing areas where drive components are installed and operated or arrange consultation with a doctor for approval. Sharp edges! Risk of injury! ▶ Wear your personal protective equipment. RE 51055-B, Edition 07.2022, Bosch Rexroth AG...
-
Page 14: Personal Protective Equipment
• ensure compliance with operating data (admissible operating temperature, maximum operating pressure). The machine end-user of the Bosch Rexroth hydraulic power unit is obliged to provide personnel training on a regular basis regarding the following subjects: • Observation and use of the operating instructions and the legal regulations •... -
Page 15: General Information On Damage To Property And Damage To Product
Damage to property! ▶ Only change parameters in accordance with the commissioning instructions 51055-IB, see chapter 1.2 "Required and amending documentation". ▶ Coordinate the any changes of other parameters with the Bosch Rexroth customer service. Operation with insufficient hydraulic fluid! Damage to property! ▶... - Page 16 ▶ Dispose of the hydraulic power unit, the hydraulic fluid and the packaging in accordance with the applicable national regulations in your country. ▶ Dispose of the hydraulic fluid according to the applicable safety data sheet of the hydraulic fluid. Bosch Rexroth AG, Edition 07.2022, RE 51055-B...
-
Page 17: Scope Of Delivery
• CytroPac hydraulic power unit • Operating instructions (this document) including EC declaration of incorporation and additional document for UL listing For further information on optionally available components, see data sheet 51055, see chapter 1.2 "Required and amending documentation". RE 51055-B, Edition 07.2022, Bosch Rexroth AG... -
Page 18: Product Information
• Interface for 24 VDC power supply, messages, if necessary enable signal and starting of functions (15X1) • Hydraulic connection/oil drain • Connection to the cooling water supply • Multi-Ethernet interface ("Premium" and "Premium M12" only, 21X1, 21X2) Bosch Rexroth AG, Edition 07.2022, RE 51055-B... -
Page 19: Product Description
The ring-shaped oil tank includes the motor-pump group and additionally reduces the operating noise. The hydraulic power unit serves for controlled or regulated generation of hydraulic flow and hydraulic pressure. RE 51055-B, Edition 07.2022, Bosch Rexroth AG... -
Page 20: Component Overview
10 Clip (for removal of the hydraulic fluid hose for hydraulic fluid draining) 5�4 Circuit diagram, hydraulic The hydraulic circuit diagram can be found in data sheet 51055, see chapter 1.2 "Required and amending documentation". Bosch Rexroth AG, Edition 07.2022, RE 51055-B... -
Page 21: Product Identification
AC 600 V / 10 A / Class J MACHINERY E492120 Made in Germany Rexroth Service - the Original Bosch Rexroth AG, DE-97816 Lohr www.boschrexroth.com/service Hotline: +49 9352 405060 Fig� 2: Name plate 1 Country of origin 12 Maximum flow... -
Page 22: Transport And Storage
Risk of injury! Damage to property! ▶ During transport, make sure that these components do not come into contact with attachment devices and lifting gear. ▶ Ensure that the hydraulic power unit is not attached or lifted at these components. Bosch Rexroth AG, Edition 07.2022, RE 51055-B... -
Page 23: Transporting The Hydraulic Power Unit
4� Secure the hydraulic power unit against the occurring acceleration forces and the related undesired motion of the hydraulic power unit. 5� During transport, only lift the hydraulic power unit as far off the floor as necessary for transport. RE 51055-B, Edition 07.2022, Bosch Rexroth AG... -
Page 24: Transport Using Lifting Gear
4� Make sure that the cover is closed during transport. See Fig. 3. 5� Attach a suitable lifting gear to the eyebolt. 6� Attach the lifting gear to a crane hook. 7� Slowly and carefully lift the hydraulic power unit in order to avoid swinging. Fig� 3: Eyebolt Bosch Rexroth AG, Edition 07.2022, RE 51055-B... -
Page 25: Storing The Hydraulic Power Unit
The maximum storage time of the hydraulic power unit is 12 months. If the storage time exceeds 12 months, check the function of the hydraulic power unit and flush it with suitable cleaning liquid prior to commissioning. RE 51055-B, Edition 07.2022, Bosch Rexroth AG... -
Page 26: Assembly
See also Fig. 9 and 10. Vibrations in the environment! Damage to property! ▶ Use vibration dampers like damping mats. ▶ Connect the hydraulic power unit to the machine via hydraulic hoses. Do not use any rigid pipelines. Bosch Rexroth AG, Edition 07.2022, RE 51055-B... -
Page 27: Dimensions Of The Hydraulic Power Unit
The dimensions of the hydraulic power unit can be found in data sheet 51055, see chapter 1.2 "Required and amending documentation". 7�2�2 Fixing the hydraulic power unit in place Bosch Rexroth offers an optional mounting kit for fixing the hydraulic power unit in place. The mounting kit consists of the following components: •... - Page 28 2� Attach the edge protector provided to this clip. Fig� 5: Assembly steps 1 and 2 3� Place the installation plate in correct position on a level surface. This defines the arrangement of the hydraulic power unit. Bosch Rexroth AG, Edition 07.2022, RE 51055-B...
- Page 29 If the hydraulic power unit is not positioned completely on the installation plate but on the locking mechanisms, the hydraulic power unit can be slightly rotated into the correct position. Fig� 8: Assembly step 6 RE 51055-B, Edition 07.2022, Bosch Rexroth AG...
- Page 30 If space is limited, it is useful to insert the hexagon socket head cap screw M6 x 430 into the bore before positioning the unit. – Tighten the hexagon socket head cap screw with a maximum of 2 Nm and a thread locker. = 2 Nm Fig� 9: Assembly step 7 Bosch Rexroth AG, Edition 07.2022, RE 51055-B...
-
Page 31: Connecting The Hydraulic Supply
– the outer layer of the hose is not subject to abrasion or impacts. – the weight of the hose line does not lead to inadmissible loads. If failure of a hose line may cause hazards caused by whipping, Bosch Rexroth recommends mounting a hose safety catch. If the hose lines are equipped with tear-proof fittings, a hose safety catch is not required. -
Page 32: Connecting The Hydraulic Supply With The Standard Version
▶ Optionally, you can use the non-return oil tank connections T: G1, see Fig. 10, oil tank connections T item 2 and item 3, e.g. for a rotary transmission leadthrough. ▶ Close unused ports with plug screws. Bosch Rexroth AG, Edition 07.2022, RE 51055-B... -
Page 33: Connecting The Hydraulic Supply In Master/Slave Operation
1� Connect the oil tanks via the oil tank connections T: G1 of the two hydraulic power units with a hose line so that the oil level can be compensated. – Use suitable screw-in connections for this purpose. Fig� 11: Representation of the balancing hose RE 51055-B, Edition 07.2022, Bosch Rexroth AG... - Page 34 Fig� 12: Representation of the return line 3� Connect the pressure ports P: G1/2 with a hose line, if possible, also symmetrically with each other. Fig� 13: Representation of the pressure line Bosch Rexroth AG, Edition 07.2022, RE 51055-B...
-
Page 35: Connecting The Water Supply
– Minimum cooling water flow: 8 l/min – Maximum cooling water pressure 10 bar – Maximum glycol content: 30 % Master/slave operation ▶ Connect both hydraulic power units in parallel to the water cooling. Note the dewpoint. RE 51055-B, Edition 07.2022, Bosch Rexroth AG... -
Page 36: Overview Of The Electrical Interfaces
For the "Premium" and "Premium M12" expansion stages, the sensors are factory-wired and connected via a cable set to port 16X1. The "Premium" and "Premium M12" configurations differ only in the device socket used, see Fig. 25. Optionally available Bosch Rexroth AG, Edition 07.2022, RE 51055-B... -
Page 37: Description Of The Electrical Interfaces
To ensure a smooth connection to the power supply, it is imperative to use one of the mating connectors offered by Bosch Rexroth without or with cables. For a complete list of accessories, see data sheet 51055, see chapter 1.2 "Required and amending documentation". - Page 38 PC. This requires a mini USB cable (USB 2.0 A to USB 2.0 Mini-B). frequency converter Bosch Rexroth recommends using a shielded cable with ferrite core, as this is less sensitive to interference. Bosch Rexroth offers a suitable mini USB cable. For a complete list of accessories, see data sheet 51055, see chapter 1.2 "Required and amending documentation".
- Page 39 Please also refer to chapter 14.2.3 of the operating instructions for frequency converters, series EFC x610, see chapter 1.2 "Required and amending documentation". Bosch Rexroth offers suitable cables in different lengths. For a complete list of accessories, see data sheet 51055, see chapter 1.2 "Required and amending documentation".
- Page 40 Hardware damage of the channel may also cause "StO-E" error. The parameter [H0.03] is used to monitor the status of the STO function. For further information on the parameters used, see the commissioning instructions 51055-IB, see chapter 1.2 "Required and amending documentation". Bosch Rexroth AG, Edition 07.2022, RE 51055-B...
-
Page 41: Basic" Configuration
"Basic" configuration, for example, by means of deactivation of the 24 VDC release or the electric power supply. Bosch Rexroth offers a suitable cable set to connect the sensors with just one supply line. For a complete list of accessories, see data sheet 51055, see chapter 1.2 "Required and amending documentation". - Page 42 Filter contamination shown in Table 10. sensor 75 % Table 10: Circuit diagram and function: Filter contamination sensor 75 % Circuit diagram Function -16B3 Pre-warning filter contamination Opens at 1.6 bar 75 % > 1,6 bar Bosch Rexroth AG, Edition 07.2022, RE 51055-B...
- Page 43 The filter contamination sensor 100 % is designed on the component side as follows: Table 13: Pin assignment of the device connector: Filter contamination sensor 100 % Function Power supply 24 VDC Pre-warning 100 % at 2.2 bar M12x1; 4-pole, A-coded (device connector) RE 51055-B, Edition 07.2022, Bosch Rexroth AG...
- Page 44 For a description of the functions and the associated parameters, see chapter "CytroPac functions" of the commissioning instructions 51055-IB, see chapter 1.2 "Required and amending documentation". Bosch Rexroth offers suitable cables in different lengths. For a complete list of accessories, see data sheet 51055, see chapter 1.2 "Required and amending documentation".
- Page 45 [F2.19/F2.20] for hydraulic functions or [E1.03/E1.04] for converter functions. For further information on the allocation of inputs and outputs with functions, see the chapter "CytroPac functions" of the commissioning instructions 51055-IB, see chapter 1.2 "Required and amending documentation". RE 51055-B, Edition 07.2022, Bosch Rexroth AG...
-
Page 46: Premium" And "Premium M12" Configurations
For a description of the functions and the associated parameters, see chapter "CytroPac functions" of the commissioning instructions 51055-IB, see chapter 1.2 "Required and amending documentation". Bosch Rexroth offers suitable cables in different lengths. For a complete list of accessories, see data sheet 51055, see chapter 1.2 "Required and amending documentation". - Page 47 First run command source 1: Digital input 1 (Operation without control communication) 2: Communication 2 (Premium) For further information, see the operating instructions for the frequency converter, series EFC x610, see chapter 1.2 "Required and amending documentation". RE 51055-B, Edition 07.2022, Bosch Rexroth AG...
- Page 48 The interface 21X1 (network input) is always connected. The interface 21X2 (network output) is used to connect further devices. When not in use, close the connection to maintain the degree of protection. Bosch Rexroth AG, Edition 07.2022, RE 51055-B...
- Page 49 49/80 Multi-Ethernet interfaces of the "Premium" configuration Fig� 22: Device socket RJ45 Push-Pull Bosch Rexroth offers a suitable plug for self-assembly or pre-assembled cables with a push-pull plug IP67 to standard RJ45 in different lengths for the "Premium" configuration. For a complete list of accessories, see data sheet 51055, see chapter 1.2 "Required and amending documentation".
-
Page 50: Electrical Interface Connection
2 Filter contamination sensor 100 % 9 15X1: 24 V interface 3 Filter contamination sensor 75 % (M12 x 1, 8-pole) 5 12X1: Feed-in/voltage supply 10 14X1: Mini USB service interface To be wired by the customer Optionally available Bosch Rexroth AG, Edition 07.2022, RE 51055-B... -
Page 51: Premium" And "Premium M12" Configurations
4 16X1: (M12 x 1) sensor evaluation, (M12 x 1, 8-pole) wired at the plant 10 14X1: Mini USB service interface 5 12X1: Feed-in/voltage supply The sensors are factory-wired and connected via a set of cables to the port 16X1. Optionally available RE 51055-B, Edition 07.2022, Bosch Rexroth AG... -
Page 52: All Configurations
▶ Connect the hydraulic power unit to an external PC via the mini-USB service interface using a mini USB cable. Bosch Rexroth recommends using a shielded cable with ferrite core, as this is less sensitive to interference. Bosch Rexroth offers a suitable mini USB cable. -
Page 53: Commissioning
This particularly applies to "Mechanical hazards" due to mechanical motions of the machine initiated by the hydraulic power units and drives (cylinder, motor). Bosch Rexroth recommends bleeding and flushing the hydraulic system before connecting the CytroPac. Please observe the operating instructions of the machinery/system. -
Page 54: First Commissioning
▶ Replace the air filter in the assembly kit against the filling and breathing filter and ensure that filling is no longer realized via the air filter. The filling level must be within the marking on the filling level indicator. Bosch Rexroth AG, Edition 07.2022, RE 51055-B... -
Page 55: Re-Commissioning After Longer Standstill
– the hydraulic fluid level – hydraulic components and line systems for tightness ▶ Switch on components with increased caution. ▶ Bleed the hydraulic system. Observe the information in the operating instructions of the machine/system manufacturer. RE 51055-B, Edition 07.2022, Bosch Rexroth AG... -
Page 56: Operation
Make sure that required measures for decommissioning are implemented by the machine/system manufacturer. Information on operating the hydraulic power unit can only be provided in connection with the machine/system. For this information, please refer to the operating instructions of the machine/system manufacturer. Bosch Rexroth AG, Edition 07.2022, RE 51055-B... -
Page 57: Maintenance And Repair
▶ Do not use compressed air for the cleaning at functional interfaces. ▶ Remove external coarse dirt and keep sensitive and important parts like electrical connections clean. ▶ For the cleaning, use a damp, non-linting cloth or residue-free industrial wipes. RE 51055-B, Edition 07.2022, Bosch Rexroth AG... -
Page 58: Inspection
58/80 CytroPac | Maintenance and repair 10�2 Inspection Bosch Rexroth recommends documenting the inspection results • so that considering functionality and economy, the inspection and maintenance intervals can be adjusted to the actual operating conditions. • by comparing the documented values, you can identify faults at an early point in time. -
Page 59: Maintenance Schedule
▶ Check the power unit housings, cables and plug-in connections and connector contacts for damage. Inadmissible damage includes breaks, cracks, abrasion, deformation or discoloration. The hydraulic power unit may only be operated if the electric components are not damaged. RE 51055-B, Edition 07.2022, Bosch Rexroth AG... -
Page 60: Monitoring The Filling Level
▶ After the end of the shift, schedule and perform a change of the filter element. ▶ If the intervals between the necessary renewal of the filter elements are shortened, identify the cause of the increased dirt input and eliminate it. Bosch Rexroth AG, Edition 07.2022, RE 51055-B... - Page 61 – If possible, do not remove the cable set to prevent the cables from being swapped. 6� Insert a new filter element. Bosch Rexroth offers a suitable filter element, see chapter 10.6 "Spare and wear parts". For a complete list of accessories, see data sheet 51055, see chapter 1.2 "Required and amending documentation".
-
Page 62: Visual Inspection Of The Filling And Breathing Filter
The pressure values need to be checked in case of any changes in drive behavior (e.g. increased cycle time, end product quality, etc.). Otherwise, semi-annual inspections are recommended. Bosch Rexroth recommends documentation of pressure values in the maintenance documentation. 10�5�7 Hydraulic fluid care The hydraulic fluid should be analyzed at least annually. -
Page 63: Visual Inspection For Leakage, Cracking, Force Effects And Corrosion
The heat exchanger does not require specific maintenance. The set-up of the heat exchanger is robust and does not lead to any increased requirements for the cooling water unit. Dirt particle must not exceed 1 mm. RE 51055-B, Edition 07.2022, Bosch Rexroth AG... - Page 64 R901451898 COVER CYTROPAC-DREH RAL7035 Rotatable cover RAL7035 1992 R901470062 AIR FILTER TMDF/1/BRC Filler and breathing filters 1910 R901471242 AIR FILTER TMDF/1/BR Air filter from filling device assembly kit R901456587 FLOAT SWITCH M60.1.A2.B4.270.320.& Float switch 1920 Bosch Rexroth AG, Edition 07.2022, RE 51055-B...
- Page 65 Maintenance and repair | CytroPac 65/80 ▶ Please send any spare part orders to the nearest Bosch Rexroth service center or directly contact the headquarters. For the addresses, please refer to www.boschrexroth.com. Ordering of spare parts: ▶ Order spare parts in writing. In urgent cases you can also order by phone, but you are kindly requested to confirm your order in writing.
-
Page 66: Decommissioning
Ensure that the lines and consumers are completely emptied. If necessary, carry out bleeding measures. ▶ Treat cooling water connections with a suitable corrosion protection agent. Decommission the overall machinery/system as described in the overall Overall machinery/ machinery/system operating instructions. system Bosch Rexroth AG, Edition 07.2022, RE 51055-B... -
Page 67: Disassembly And Exchange
For this reason, close all outlets of lines with suitable blanking plugs. After disassembly, observe the information on safe transport of the product in chapter 6 "Transport and storage". RE 51055-B, Edition 07.2022, Bosch Rexroth AG... -
Page 68: Disposal
Any declarations shall If you undertake any extensions to or modifications of the product marketed become invalid by Bosch Rexroth, this means you are changing the condition as supplied. Any statements made by Bosch Rexroth regarding this product will then become invalid. -
Page 69: Troubleshooting
• Was the hydraulic power unit or the machine/system used as intended? • How did the fault become apparent? ▶ Try to get a clear idea of the cause of error. ▶ If necessary, ask the actual (machine) operator. RE 51055-B, Edition 07.2022, Bosch Rexroth AG... -
Page 70: Overview Of The Impact Of Defects
Frequency converter Motor current during acceleration too high ▶ Extend the acceleration ramp. over-current when connecting For further information, see "Acceleration hydraulic actuators. limitation" in the commissioning instructions 51055-IB, see chapter 1.2 "Required and amending documentation". Bosch Rexroth AG, Edition 07.2022, RE 51055-B... - Page 71 Insufficient hydraulic fluid temperature or ▶ Increase the temperature of the hydraulic power too high viscosity class too high unit before starting the machine function. ▶ If necessary, use hydraulic fluid with a lower viscosity class. RE 51055-B, Edition 07.2022, Bosch Rexroth AG...
-
Page 72: Technical Data
Headquarters: Bosch Rexroth AG Zum Eisengießer 1 97816 Lohr am Main Germany Phone: +49 (0) 9352/40 30 20 Email: my.support@boschrexroth.com The addresses of our sales and service network and sales organizations can be found at www.boschrexroth.com/adressen Bosch Rexroth AG, Edition 07.2022, RE 51055-B... -
Page 73: Declaration Of Incorporation
The following person is authorized to compile the relevant technical d ocumentation: U< Name: Andreas Günder Address: Bosch Rexroth AG, Zum Eisengießer 1, ohr, GERMANY 18.07.2019 Place Date Place/date/signature as indicated in the original declaration. The contents of the Declaration of lncorporation are subject to change without notice. Currently valid edition on request. -
Page 74: Annex To The Declaration Of Incorporation
74/80 CytroPac | Appendix 17�2�1 Annex to the declaration of incorporation Bosch Rexroth AG, Edition 07.2022, RE 51055-B... -
Page 75: Prohibited Substances - Reach, Rohs, Weee
LINK available for download. We regularly check our products for the use of hazardous substances (SVHC), buy our components exclusively from qualified suppliers and ensure with the compliance of the Bosch standard N2580 that our AB products do not pose any danger to people and the environment. -
Page 76: Additional Document For Ul Listing
EXTERNAL CONTROL CIRCUIT OVERCURRENT PROTECTION SHALL BE PROVIDED IN THE END USE, MAX. 1A. USE UL LISTED OR UL RECOGNIZED OVERCURRENT PROTECTIVE DEVICES SUITABLE FOR INDUSTRIAL APPLICATIONS. FOR USE IN POLLUTION DEGREE 3 AND OVERVOLTAGE CATEGORY III IN ORDINARY LOCATION ENVIRONMENTS ONLY. Bosch Rexroth AG, Edition 07.2022, RE 51055-B... - Page 77 PROTECTION CONTRE LES SURINTENSITES REPERTORIES OU RECONNUS PAR LA CERTIFICATION UL ET ADAPTES AUX APPLICATIONS INDUSTRIELLES. L’UTILISATION DANS UN ENVIRONNEMENT DE POLLUTION DE CATEGORIE 3 ET DE SURTENSION DE CATEGORIE III DOIT-ETRE DANS UN ENVIRONNEMENT ORDINAIRE. RE 51055-B, Edition 07.2022, Bosch Rexroth AG...
-
Page 78: Alphabetical Index
Hydraulic fluid care .... 62 sensor 100 % ...... 43 Hydraulic supply - Port 12X1 ......... 37 - in master/slave operation .. 33 - Port 14X1 ......... 38 - Standard version ...... 32 - Port 15X1 ...... 44, 46 Bosch Rexroth AG, Edition 07.2022, RE 51055-B... - Page 79 Visual inspection of the filling and breathing filter ...... 62 Performance description .... 18 Product description .... 19 Product identification .... 21 Warning devices ...... 58 Prohibited substances - WEEE .......... 75 REACH, RoHS, WEEE .... 75 Qualification ......... 9 RE 51055-B, Edition 07.2022, Bosch Rexroth AG...
- Page 80 Bosch Rexroth AG Industrial Hydraulics Zum Eisengießer 1 97816 Lohr a. Main Germany Tel. +49 (0) 9352/40 30 20 my.support@boschrexroth.com www.boschrexroth.com Subject to change without notice Printed in Germany RE 51055-B...