View The Customization State On The Phone - Cisco 8832 User Manual
Ip conference phone, multiplatform phone
Hide thumbs
Also See for 8832:
- Administration manual (190 pages) ,
- User manual (67 pages) ,
- Manual (30 pages)
Table of Contents
Advertisement
Your Phone
You can also find the information about your phone by going to Info > Status > Product Information on
the phone web interface.
Procedure
Step 1
Press Settings.
Step 2
Select Status > Product Information.
You can view the following information:
Product name— Name that represents the Cisco IP Phone.
Serial number— Serial number of the Cisco IP Phone.
MAC address—Hardware address of the Cisco IP Phone.
Software version—Version number of the Cisco IP Phone firmware.
Configuration version—Version number of the Cisco IP Phone configuration. This information shows when
your administrator has enabled it.
Hardware version—Version number of the Cisco IP Phone hardware.
VID—Version ID of the Cisco IP Phone.
Certificate—Status of the client certificate, which authenticates the Cisco IP Phone for use in the ITSP
network. This field indicates if the client certificate is properly installed in the phone.
Customization—For an RC unit, this field indicates whether the unit has been customized or not. Pending
indicates a new RC unit that is ready for provisioning. If the unit has already retrieved its customized profile,
this field displays the Customization state as Acquired.
Step 3
Press Back to return to the Applications screen.
View the Customization State on the Phone
After the RC download from the EDOS server completes, you can view the customization state of a phone
on the screen.
Here are the descriptions of the remote customization states:
• Open—The phone has booted for the first time and is not configured.
• Aborted—Remote Customization is aborted due to other provisioning, for example, DHCP options.
• Pending—The phone can not download the profile from the EDOS server.
• Custom-Pending—The phone has downloaded a redirect URL from the EDOS server.
• Acquired—In the profile downloaded from the EDOS server, there is a redirect URL for provision
• Unavailable—Remote customization has stopped because the EDOS server responded with an empty
configuration. If the redirect URL download from the provisioning server is successful, this state is
displayed.
provisioning file and the HTTP response was 200 OK.
Cisco IP Conference Phone 8832 Multiplatform Phone User Guide
View the Customization State on the Phone
23
Advertisement
Table of Contents
