Advertisement
Assembling the Rack
1.
Lay the main frame down on a solid, level surface and loosen the key bolts in clamps q and w using
the drum key.
Clamp q
Drum key
The drum key can be found in the pad set package.
2.
Loosen the bolts on clamps q, w, and e and move the clamps all the way down to the center strut.
Following this, lightly tighten the clamp bolts.
Clamp q
Clamp e
3.
Take the left arm from the package and loosen the key bolt in clamp r using the drum key.
The left and right arms look very alike, but the left arm is longer. Take care not to mix them up when
assembling the rack.
6
ELECTRONIC DRUM RACK Owner's Manual
Key bolt
Clamp w
Center strut
Left arm
Key bolt
Clamp r
Clamp w
Key bolt
Drum key
Loosen
Bolt
Lightly
tighten
Advertisement
