Cisco MGX 8850 Command Reference Manual page 409

Routing switch

Hide thumbs Also See for Cisco MGX 8850:

Table of Contents

PNNI Commands

dsppnni-summary-addr

Display PNNI Summary Address

The dsppnni-summary-addr command displays all summary addresses at the specified degree of

granularity.

Use addpnni-summary-addr to create a new summary addresses or to configure an existing one.

Cards on Which This Command Runs

dsppnni-summary-addr

[node-index]

Syntax Description

Display Contents

Release 2.0, Part Number 78-10467-04 Rev C0, October 2001

— display the PNNI summary addresses.

If you specify node-index, the command displays the PNNI summary addresses of the node-index

If you do not specify node-index, the command displays PNNI summary addresses for all local

nodes on network.

Specify the system-generated identifier of a logical node within a hierarchy. In

the current release, the only node-index is 1.

Range: 1–10.

Default = 1.

The number of the node within the hierarchy on this switch. The range for a

multi-peer group is 1–10. For a single-peer group, the only node index is 1.

Display the value of the argument -type—whether the kind of PNNI summary

address is internal or external.

In the current release, the value of the -type argument must be 'internal'.

internal: This PNNI summary address includes only addresses that are within

the peer group.

exterior: This PNNI summary address includes addresses that are outside of

the peer group.

Display the value of the argument -suppress—whether the node PNNI

summary address is advertised or suppressed.

false: The PNNI summary address is advertised (is not suppressed).

true: The PNNI summary address is not advertised (is suppressed).

Cisco MGX 8850 Routing Switch Command Reference

dsppnni-summary-addr

Chapters

Table of Contents