About This Guide; Unpacking The Switch - Cisco Catalyst 2975 Getting Started Manual

Cisco systems catalyst 2975 switch getting started guide

Table of Contents

About this Guide

This guide provides instructions on how to use Express Setup to initially configure your Catalyst switch. Also covered are switch

management options, basic rack-mounting, stacking guidelines, port and module connection procedures, and troubleshooting

help.

For additional installation and configuration information for the switch, see the Catalyst 2975 documentation on Cisco.com.

For system requirements, important notes, limitations, open and resolved bugs, and last-minute documentation updates, see the

release notes, also on Cisco.com. For translations of the warnings that appear in this publication, see the Regulatory Compliance

and Safety Information for the Catalyst 2975 Switch on the documentation CD. The product warranty information is also

included on the documentation CD.

When using the online publications, refer to the documents that match the Cisco IOS software version running on the switch.

The software version is on the Cisco IOS label on the switch rear panel.

Follow these steps:

1. Unpack and remove the switch and the accessory kit from the shipping box.

2. Return the packing material to the shipping container, and save it for future use.

3. Verify that you have received the items shown below. If any item is missing or damaged, contact your Cisco representative

or reseller for instructions.

Catalyst 2975 switch

Documentation

AC power cord

Console cable

Two 19-inch mounting brackets

Cable guide

Cata lyst 2975

Serie s

PoE- 48

Four rubber mounting feet

Six number-8 Phillips flat-head screws

Four number-12 Phillips machine screws

One black Phillips machine screw

Connector cover for redundant power system; two number-4 pan head screws

Table of Contents

Show Quick Links

Table of Contents