Summary of Contents for Panasonic Omnivision PV-C2061
Page 1
Please read these instructions carefully before attempting to connect, operate, or adjust this product. Please save this manual. Spanish Quick Use Guide is included. (Guía para rápida consulta en español está incluida.) LSQT0332A For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
Important Safeguards and Precautions READ AND RETAIN ALL SAFETY AND OUTDOOR ANTENNA INSTALLATION OPERATING INSTRUCTIONS. HEED ALL 1 SAFE ANTENNA AND CABLE CONNECTION WARNINGS IN THE MANUAL AND ON UNIT An outside antenna or cable system must be properly grounded to provide some protection INSTALLATION against built up static charges ANTENNA...
Page 3
Safety Precautions/Mesures de sécurité Warnin To prevent fire or shock hazard, do not expose this equipment to rain or moisture. Caution : To prevent electric shock, match wide blade of plug to wide slot, fully insert. Avertissement : Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas exposer cet appareil à...
PLAY/REPEAT on the To record again. unit for 7 seconds to deactivate the SELF- DEMO Mode. Repeat this to display Cover the hole demo screen. with cellophane tape. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
Table of Contents Important Safeguards and Precautions / Safety Precautions ..2 Before Using ..................4 Table of Contents ................. 5 Location of Controls ................6 Initial Setup for ANT. / Cable Connection .......... 8 Initial Setup for DSS / Cable box Connection ......... 10 Reset Language, Channels, Clock, Time Zone Adjust ....
(mode button will flash) in the dark. EJECT button: When EJECT is pressed, the tape is ejected from Cassette Compartment. If EJECT is pressed during recording, the unit will not respond to the command. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
Page 7
Front View of the unit and Indicators on the Front Panel <Model PV-C2061 unit shown> Page 14 REWIND/SEARCH Cassette Compartment Page 13 ACTION Page 14 STOP/EJECT Page 14 PLAY/REPEAT ACTION Page 13 Page 14 CHANNEL UP/DOWN Page 16 FAST FORWARD/SEARCH TRACKING UP/DOWN Page 42 Page 14...
• If wrong language is set, complete “Reset all unit Memory Functions” steps page 9. WARNING: When using “Nut type” RF coaxial cables, tighten with fingers only. Overtightening may damage terminals. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
Page 9
* Important: if a remote control button does not work when pressed, press the COMBO button on the remote and try the button again. Press CH Key to start CHANNEL / CLOCK AUTO SET operation. Settings are performed automatically. If the setup is completed, the following screen is displayed.
• If wrong language is set, complete “Reset all unit Memory WARNING: Functions” steps page 9. When using “Nut type” RF coaxial cables, tighten with fingers only. Overtightening may damage terminals. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
Page 11
* Important: if a remote control button does not work when pressed, press the COMBO button on the remote and try the button again. Press CH Key to start CHANNEL / CLOCK AUTO SET operation. Settings are performed automatically. If the setup is completed, the following screen is displayed.
DST 3) Press (Daylight Saving select “EXIT.” Time). Press ACTION to 5) Press ACTION exit. twice to start the clock and exit this mode. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
Page 13
* Important: if a remote control button does not work Time Zone Adjust when pressed, press the COMBO button on the remote and try the button again. Time Zone Adjust (Only when Auto Clock is set.) 1) Press select “CLOCK.” M A I N MENU LANGUAGE CLOCK...
PLAY/REPEAT REC ON TIMER ON TIMER PROG TIMER PROG TIMER VIDEO IN VIDEO IN AUDIO IN AUDIO IN ACTION ACTION Press to stop and/or REC Indicator eject tape. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
* Important: if a remote control button does not work Copy Your Tapes (Dubbing) when pressed, press the COMBO button on the remote and try the button again. Connections you’ll need to make. <Model PV-C2081 unit shown> <Model PV-C2061 unit shown> Recording (Editing) unit Recording (Editing) unit Playing (Source) VCR...
Press MUTE to instantly mute the sound. Press again to restore the previous sound level. Phones Connect an earphone (not supplied) or headphones (not supplied) to the Phones Jack. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
MTS Broadcast/TV Stereo System Receivable Broadcast Types ® Equipped with -TV Noise Reduction for true MTS The following are possible audio broadcast types and ® reproduction. -TV Noise on-screen displays. The signal being received is indicated Reduction is required for good with an “...
3. Now, press PROG/VCR+ to end. the alarm) is pressed within 60 “ON TIMER END” briefly appears on-screen. minutes after unit turns itself on, it will turn itself back off. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
Page 19
* Important: if a remote control button does not work when pressed, press the COMBO button on the remote and try the button again. SLEEP TIMER This unit can be set for auto power off. Press SLEEP repeatedly SLEEP TIMER 30 to set SLEEP TIMER.
NOTE : The closed caption or text signal may be broadcast over C1, C2, or both. Also, text contents can vary so you may wish to try different settings. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
* Important: if a remote control button does not work Picture Adjustment when pressed, press the COMBO button on the remote and try the button again. Press ACTION to display MAIN MENU. 1)Press M A I N MENU select “TV.” LANGUAGE 2)Press ACTION to display SET UP TV...
• Once stations are set, the selected station and current time : ACT I ON are displayed when FM Radio mode is entered. To remove time, press DISPLAY. If DISPLAY is pressed again, the unit status screen appears. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
Page 23
* Important: if a remote control button does not work FM Transmitter when pressed, press the COMBO button on the remote and try the button again. <For Model PV-C2081 only> FM Transmitter Control Send Wireless Set to “STEREO” if you wish to listen in stereo. Do “FM Transmitter Carrier Frequency Setup”...
PROGRAM” and + to display • PROG TIMER indicator lights on the unit. the TIMER PROGRAM screen. Repeat main steps 3 ~ 5. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
Page 25
* Important: if a remote control button does not work when pressed, press the COMBO button on the remote and try the button again. Review, Replace or Clear Program Cancel a Timer Recording: Contents : ( Recording is not in progress ) (Recording is in progress) Hold down STOP for a few seconds Repeat steps 1 and 2 on page 24.
Press to move • Repeat step 4 until list to error, then is complete. change, or ADD/DLT to erase number. Press ACTION three times to end the setup. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
Page 27
* Important: if a remote control button does not work when pressed, press the COMBO button on the remote and try the button again. Ready Check List VCR Plus+ System Programming The clock is set to correct time. VCR Plus+ System Setup is Press PROG/VCR+ complete.
• All TV and VCR functions. Set to DSS CABLE: • Basic VCR functions, e.g. PLAY, REC, etc. • CABLE/DSS functions, e.g. POWER, ENTER, number keys (except 100 key), CH UP/DOWN. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
Index Search mode will be canceled. • If Index Search is started very close to an index mark, that index mark may not be counted in the search. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
Page 31
* Important: if a remote control button does not work when pressed, press the COMBO button on the remote and try the button again. Auto Operation Functions <Model PV-C2061 unit shown> Auto Shut Off No broadcast signal in TV, blank tape is Played for 5 minutes Power turns off •...
Page 32
• Unit goes into FF or REW mode and depending on the position of the mark, stops at the last point the Counter was mark display may be out of position. set to 0:00:00. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
* Important: if a remote control button does not work Special VCR Features when pressed, press the COMBO button on the remote and try the button again. Remote Warning ON/OFF Weak Signal Display ON/OFF When Universal Remote Control (page 28) is When “ON”...
Page 34
: ACT I ON To Make Corrections Press , then to select channel number. Press to change, or ADD/DLT to delete. Press ACTION four times to end setup. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
Page 35
* Important: if a remote control button does not work when pressed, press the COMBO button on the remote and try the button again. Manual Caption Do “Preset Caption” steps 1~3 (page 34). 1) Press to select CHANNEL CAPT I ON MANUAL CAPTION.
Page 36
Press ACTION twice to return to normal screen. <Time Stamp Example > Normal/ One Touch Recording Timer Recording When Clock is not set... For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
* Important: if a remote control button does not work V-Chip Control Feature when pressed, press the COMBO button on the remote and try the button again. Process of V-Chip Control Feature V-Chip Control Feature is... This unit has a built-in V-Chip Control which allows Enter Code Setup Blocking...
Page 38
(chart 1), or customize be blocked. Or, press ACTION four times to exit. to a specific content rating (chart 2). Press ACTION four times to exit this mode. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
Page 39
* Important: if a remote control button does not work when pressed, press the COMBO button on the remote and try the button again. Process of V-Chip Control Feature US MOVIES RATINGS Enter Code Setup Blocking GENERAL AUDIENCE: Blocking Message All ages admitted.
• “OFF” MUTE and VOL + - level between Hi-Fi and normal buttons do not fonction. : ACT I ON audio playback. Press ACTION twice to end setup. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
On-Screen Display (OSD) Blue Screen Display VCR Status & Clock Display Whenever a blank section of a Press DISPLAY tape comes up in Play mode, or to display or remove the overlay. when the selected channel has no broadcast signal with the Weak Channel Caption (See pages 34, 35.) Signal Display set to “OFF”...
SLP (Super Long Play) 3 Hours 8 Hours 6 Hours PanaBlack Picture Tube This unit uses a PanaBlack picture tube for better color reproduction and picture contrast. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
• Make sure VCR LOCK is set to off. (P. 33 ) If you cannot resolve the problem, please call the Customer Satisfaction Center for product assistance at 201-348-9090. To locate an authorized servicenter call toll free 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com.
Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company/ Factory Servicenter: Ave. 65 de Infanteria, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Phone (787)750-4300 Fax (787)768-2910 As of January 2000 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
Or call toll free contact number listed above, to locate an authorized PASC Servicenter. Carry-in or mail-in service in Puerto Rico can be obtained during the warranty period by calling the Panasonic Sales Company telephone number listed in the Servicenter Directory.
OPR I M I R ACT I ON INCOMPLETO”, PARA FIJAR EL RELOJ ajuste el reloj utilizando los procedimientos de “AJUSTE MANUAL DEL RELOJ” mostrados en la página 9. Por ayuda, llame al 1-800-211-PANA(7262) o envie e-mail a : consumerproducts@panasonic.com...
Page 47
Operaciones básicas para Grabación con temporizador Grabación con temporizador la reproducción Exhiba FIJAR PROGRAMACION. Inserte un casete. Presione PROG/VCR+. • El videograbador combinado se enciende automáticamente. Exhiba Presione PLAY. F I JAR PROGRAMAC I ON TEMPORIZADOR. • La reproducción comienza TE MP MP OR l ZADOR ZADOR...
NIGHT Mode ......... 16 100 Key ..........16 One Touch Recording ......14 ON-TIMER with Alarm ......18 Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company (“PSC”), Printed in U.S.A...