Connecting To The Console Port; Figure 3-33 Console Port Connection On The Pre Module; Figure 3-34 Connecting An Rj-45-To-Db-9 Console Cable Adapter - Cisco Universal Broadband Router uBR10012 Hardware Installation Manual
Cisco systems universal broadband router hardware installation guide
Hide thumbs
Also See for Universal Broadband Router Cisco uBR10012:
- Software configuration manual (240 pages) ,
- Hardware installation manual (98 pages) ,
- Troubleshooting manual (86 pages)
Table of Contents
Advertisement
Chapter 3
Installing the Cisco uBR10012 Router
Connecting to the Console Port
The console port provides local administrative access to the router and its command-line interface (CLI).
Each PRE module must have a console port connection (typically to a terminal server) when running a
Note
redundant configuration in the chassis.
Connect one end of the RJ-45 crossover cable to the serial RJ-45 port (labelled CONSOLE) on the PRE
Step 1
module
Figure 3-33
Run the other end of the crossover cable through the square hole at the left front side of the chassis, and
Step 2
connect it to the RJ-45-to-DB-9 adapter (see
Figure 3-34
Connect the adapter to the appropriate serial port on the PC or terminal to complete the console port
Step 3
cable connection.
Power on the PC or terminal.
Step 4
Configure the PC terminal emulation software or the terminal for the following default settings:
Step 5
OL-18259-09
(Figure
3-33).
Console Port Connection on the PRE Module
C IS C O
1 0 0 0 0
Connecting an RJ-45-to-DB-9 Console Cable Adapter
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
Connecting the Console Port and Auxiliary Port
Figure
3-34):
3-51
Advertisement
Table of Contents
Troubleshooting
