hit counter script
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. CISCO1750
  6. Installation manual

Cisco CISCO1750 Installation Manual page 51

Router hardware
Hide thumbs
Table of Contents

Advertisement

Table 2 lists problems that could occur with the WICs and VICs and the possible
solutions of these problems.
.
Table 2
Troubleshooting WICs and VICs
Symptom
Router does not recognize the
card.
Router recognizes the card(s),
but the card port(s) do not
initialize.
Router does not boot properly or
continuously or intermittently
reboots.
Router does not boot or reset
after the WIC or VIC is inserted.
Router boots, but the console
screen is frozen.
78-6169-02
Possible Solution(s)
Confirm that the Cisco IOS release installed in the router
•
supports the WIC or VIC.
Make sure you have a Cisco IOS feature set that supports voice.
•
The Cisco WAN Interface Cards Hardware Installation Guide
lists the software requirements for each card.
Make sure that the card is correctly installed in the router. Refer
•
to the "Installing WICs and VICs" section in the "Installation"
chapter.
•
Make sure that the card is correctly installed in the router. Refer
to the "Installing WICs and VICs" section in the "Installation"
chapter.
Check the external cable connections to make sure they are
•
secure.
Make sure that the WIC or VIC is correctly installed in the router.
Refer to the "Installing WICs and VICs" section in the
"Installation" chapter.
There might be a short. Turn off the router immediately.
•
Make sure the console cable is securely connected to the router
and to the PC or terminal.
Verify that the parameters for your terminal are set to the
•
following:
9600 baud
–
8 data bits
–
–
No parity
1 stop bit
–
no flow control
–
Cisco 1750 Router Hardware Installation Guide
Problem Solving
ix

Advertisement

Table of Contents
loading

Related Manuals for Cisco CISCO1750

Related Products for Cisco CISCO1750

This manual is also suitable for:

1750

Table of Contents

Save PDF