Summary of Contents for Haier Sea Elephant King BRF1-100W
Page 1
Sincerity For Ever Certificate of Quality Checker Group Qingdao Economic and Technical Development Zone Haier Water Heater Co,.Ltd website: //www.haier.com Sea Elephant King Solar Water Heater PJF1- 80/100W BRF1- 80/100W Please read this manual carefully before use Rev 01 Please keep this manual for future reference.
Page 2
Haier Sincerity For Ever! Thank you again for your choosing and using Haier products. Due to the improvement of products, Haier water heater you purchase might not consist with the figures in the instruction, for which we apologize here to you.
Please check Phenomenon Is water supply failed or water pressure too low? No water output Is water exit blocked?Is hot water valve opened? Is water temperature adjusted? Water exiting is cold Is temperature controller loss of control? Sunshine unsufficient No temperature rising Is Heating element idamaged? Unstable quantity and Is the tap water pressure stable?
Page 4
Features Features Electric circuit diagram Features Features 1.Comfortably-off home water heater: Collector equipment is aslant installed on the rooftop and perfectly consists with architectures around, which corresponds to the architectural standard fashion nowadays. 2.Heat tube coupling is efficient and reliable: Heat tube coupling is fast and conductive.
Page 5
Use methed Notes for usage Use methed Simultaneous heating mode: Indication clock condition--- the temperature of heating---indication clock condition Preset heating mode: Indicating clock condition---to set hour of the first preset heating time .---to set minute of the first preset heating time . ---to set temperature of preset heating .--- to set hour of the second preset heating time --- to set minute of the second preset heating time---to set temperature of the second preset heating ---indicating clock condition.
Page 6
Technical parameter Packing list Technical parameter Water-proof Volume Rated internal Model Grade Pressure BRF1-80W Antisplash 0.75MPa PJF1-80W BRF1-100W 100L Antisplash 0.75MPa PJF1-100W Frequency Model Rated voltage Assistant power 220V~ BRF1-80W 50Hz 220V~ 50Hz PJF1-80W 220V~ 50Hz BRF1-100W 220V~ 50Hz PJF1-100W...
Page 7
Use methed n u m b e r t u b e u n d e r t h e s c r e e n r e s p e c t i v e l y d i s p l a y s w a t e r temperature of water-storing tank and the temperature of water-exiting.
Installation Attentions in installment Attentions in installment Attentions in installment Electric controller should be far from strong interfering sources. Tne-way pipeline between water-storing tank and collector equipment must be less than 10 meters. Sensor of collector equipment should be installed at the water exiting Opening.
Page 9
Fig.1- Fig.2. 3/4 tee joint and the 3/4 opposite wires is provided by the appointed professional service of haier,layout of water tank should be perfected in installing. Installment of water pump To connect the the water inlet of pump to circulating water-exiting opening and the dirrection must be right.pay attention that the connection of water...
Page 10
The hose can be cut short or extended as necessary. The hose shall be installed as inclined downward. Note: the mixing valve is separately sold,you can get it from the local haier service,and contact the appointed professional serving personnel for installing and service.