Pioneer BDP-170 Service Manual
Blu-ray 3d player
Hide thumbs
Also See for BDP-170:
- Operating instructions manual (60 pages) ,
- Operating instructions manual (64 pages)
Table of Contents
Advertisement
Quick Links
Blu-ray 3D
PLAYER
TM
BDP-170
BDP-80FD
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model
Type
BDP-170
SXE
BDP-170
PWXE
BDP-80FD
CUXE
This service manual should be used together with the following manual(s).
Model No.
BDP-160-K/YXE8
For SPECIFICATIONS and PANEL FACILITIES, refer to the operating instructions.
PIONEER CORPORATION
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION
Power Requirement
Region No.
AC 110 V to 240 V
AC 110 V to 240 V
AC 110 V to 240 V
Order No.
RRV4456
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
2014
BDP-170
DVD
BD
Region No.
5
C
&&&&######UR
4
B
&&&&######PP
1
A
&&&&######UC
Remarks
ORDER NO.
RRV4572
Serial No.
Remarks
UR : RUSSIA
PP : Oceania
UC : North America
K-ZZZ NOV.
2014 Printed in Japan
Advertisement
Table of Contents
Related Manuals for Pioneer BDP-170
Summary of Contents for Pioneer BDP-170
- Page 1 PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936...
-
Page 2: Contrast Of Miscellaneous Parts
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors). 562 x 10 5621 RN1/4PC CONTRAST TABLE BDP-160-K/YXE8, BDP-170/SXE, BDP-170/PWXE and BDP-80FD/CUXE are constructed the same except for the following: Mark Symbol and Description BDP-160-K/YXE8 BDP-170/SXE... - Page 3 Note: This list is not complete. Only components that are available as service part are listed! F SWITCH BOARD ASSY Although 08-BDP160-SB0 and 08-BDP170-SB0 are different and are NOT COMPATIBLE! Some components on these assy's are different. Since these different components are not available as service part, they are not listed. BDP-170...
-
Page 4: Service Precautions
30 mm away from the connector, by wrapping the cable once around the ferrite core. MAIN BOARD ASSY Ferrite Core WiFi 4pin Cable BDP-170... -
Page 5: Service Mode
Mainly for Production Line, but some items can be used in Service. Please see "SP Mode" for details. [8] PDXY Check Verifies misalignment of optical axis. Refer to "PDXY Check" for details. [9] Error Rate Test Determine the error rate of the disc. Refer to "Error Rate Test" for details. BDP-170... - Page 6 The following is to explain items usable in Service. Other items require time for completion, or are not suited for Service purposes. If you select them by mistake, press the [STOP] button to end that item you accidentally selected. (none of the items will affect the main unit) BDP-170...
- Page 7 If an NG is generated in a specific disc only, the defect is likely to be caused by the disc. If an NG is generated in other discs too, the defect is likely to be caused by the drive part. However, even if Pass is displayed after this test, it is difficult to determine that the Driver is normal with these Pass judgments only. BDP-170...
- Page 8 TOC read time-out criterion over PIPO_TIMEOUT_ERROR Time-out criterion over PIPO_C1C2_ERROR Read PIPO command failed PIPO_C1C2_OVER PIPO criterion over RD_CMD_FAIL_ERROR Read command failed RD_CMD_ERROR Command error or illegality mode RD_TIME_OUT_ERROR Read command time-out criterion over CHECK_FA_TABLE_ERROR FA table check-sum error BDP-170...
- Page 9 If the measurement value is very close to 40% even if an NG is not generated, the NG is likely to be caused by the disc. BDP-170...
- Page 10 In such a case, close the tray manually then press the [STOP] button to quit Error Rate Measurement mode. (If the [STOP] button is pressed first, close the tray manually afterward to return to the Menu screen.) 5 Quit Service mode by pressing the [STOP] button. BDP-170...
- Page 11 [ Effective indications ] Failure in the playback system (block noise, interrupted sound, jumpiness of images, playback stopped in mid-course, frozen image, etc.) Failure judgment of the pickup, by comparing the error rates before and after cleaning of the lens BDP-170...
-
Page 12: Each Setting And Adjustment
When the unit is no power condition due to defective of a MAIN BOARD Assy, original barcode data is not able to read out from it. In such a case, read out the data of the barcode label attached to the BD LOADER, referring to the SKT15002 Service Knowhow manual. BDP-170... -
Page 13: Updating Of The Firmware
USB memory device is finished. At that moment, a "2D_barcode_data.txt" file, in which 64-bit barcode data have been written, is stored in the USB memory device. 6. Quit Service mode by pressing the [STOP] button. BDP-170... - Page 14 USB memory device is finished. 9. Quit Service mode by pressing the [STOP] button. Note: To prevent a future possible writing error, delete the "2D_barcode_data.txt" file from the USB memory device on the PC. BDP-170...
- Page 15 1 Press the HOME MENU button to display the HOME MENU screen. 2 Move the cursor to Initial Setup then press the ENTER button. 3 Move the cursor to Options then press the ENTER button. 4 Move the cursor to Update then press the ENTER button. BDP-170...
- Page 16 7 After updating is completed, the product will automatically restart. After restarting is finished, unplug the USB storage device. 2. Changing the Destination Setting 1 Display the HOME MENU screen, move the cursor to Initial Setup, then press the ENTER button. BDP-170...
- Page 17 ENTER button. ([4] SXE (Russia) [5] PWXE (Oceania) [8] CUXE (U.S.A.)) 5 Turn the unit OFF then back ON again. (Be sure to do this after changing the destination setting.) BDP-170...
- Page 18 3 Check that the latest version of the firmware is installed, by selecting Initial Setup > Option > System Information, in that order. Caution: Be sure to write the latest firmware that suits the destination of the product, because the product will not operate properly with the firmware for service, which is used for changing the destination setting. BDP-170...