Installation (Before Use) How to mounting filter set, 1. Remove the panel. 2. Take filter set from plastic bag. 3. Mount filter set inside the mounting hock. 4. Attach the panel. Caution Please slowly attach and detach the panel. (Cause of injury)
(Installation location) Please choose a place room air circulates well, near the person who smokes cigarettes. Operation (How to drive) 1. Plug the power plug into an outlet. 2. Press operation switch. 3. To stop driving, press the operation switch. (Switching operation mode) Press operation change switch.
Maintenance (machine body) 1. Soak the cloth in neutral washing solution diluted with water. 2. Wipe off the dirt with the cloth. 3. Wipe the detergent with a cloth squeezed with water. (Panel suction port) Wipe off dust with a vacuum cleaner. (Sensor hole): about once a month 1.
Page 5
(filter set) 1. Remove panel. 2. Wipe the dust on the surface of the filter set with a vacuum cleaner. Caution Please do not press the suction port of vacuum cleaner strongly. (Exchange of filter set) ・Time for replacement Please replace periodically because the cleaning effect will decrease if the filter set is used for long time.
Trouble shooting ・Wind does not come out. Please check whether the power plug is firmly attached to the outlet. ・Less air volume. Check the filter set is out of the plastic bag. ・Do not drive automatically Selected automatic operation. When inserting the power plug, the air in the room might have been dirty. ・Driving while the air is not dirty.
Specification Model name CAF-R35 Power supply AC 100 V 50/60Hz shared Power consumption strength medium weak 45/53 25/27 4.5/4.5 Air flow ( /) External dimensions 370mm×400mm×135mm mass About 3.8kg Applicable floor area ~26 Power cord length About 1.8m Accessories Filter set…1 set The power consumption in the operation stopped state is about 0.5 W...