Advertisement
Setting Network Security Parameters
Choose one of the following EAP-FAST username and password setting options:
Step 4
Use Temporary User Name and Password—Requires you to enter the EAP-FAST username and
•
password each time the computer reboots in order to authenticate and gain access to the network.
Use Saved User Name and Password—Does not require you to enter an EAP-FAST username and
•
password each time the computer reboots. Authentication occurs automatically as needed using a
saved username and password (which are registered with the RADIUS server).
Note
Perform one of the following:
Step 5
If you selected Use Temporary User Name and Password in
•
options:
–
–
–
•
If you selected Use Saved User Name and Password in
a.
b.
c.
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
5-44
The Use Saved User Name and Password option is available only if the Allow Saved
EAP-FAST User Name and Password option was enabled (set to Yes) during installation.
Use Windows Logon User Name and Password—Causes your Windows username and
password to also serve as your EAP-FAST username and password, giving you only one set of
credentials to remember. After you log in, the EAP-FAST authentication process begins
automatically. This option is the default setting.
Automatically Prompt for User Name and Password—Requires you to enter a separate
EAP-FAST username and password (which are registered with the RADIUS server) in addition
to your regular Windows login in order to start the EAP-FAST authentication process.
Manually Prompt for User Name and Password—Requires you to manually invoke the
EAP-FAST authentication process as needed using the Manual Login option from the
Commands drop-down menu. You are not prompted to enter an EAP-FAST username and
password during the Windows login. This option might be used to support a software token
one-time password system or other systems that require additional software that is not available
at login.
Enter a username and password in the appropriate fields.
Usernames are limited to 64 ASCII characters, and passwords are limited to 32 ASCII
Note
characters. However, if a domain name is entered in the Domain field, the sum of the
username and domain name is limited to 63 ASCII characters.
Re-enter the password in the Confirm Password field.
If you wish to specify a domain name that will be passed to the RADIUS server along with your
username, enter it in the Domain field or include it in the User Name field as follows:
username@domain.com. A maximum of 64 ASCII characters can be entered for the
username@domain.com string, and this format must be supported by your RADIUS server.
If you include the domain name in the User Name field, the Domain field becomes
Note
disabled.
Chapter 5
Configuring the Client Adapter
Step
4, choose one of the following
Step
4, follow these steps:
OL-1394-08
- Quick Links:
- Setting System Parameters
Hide quick links:
Advertisement
