Using Advanced Phone Features
Using the IP Phone With Your Bluetooth-Enabled Mobile Phone
STEP 1
STEP 2
NOTE
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide
The phone displays a status message about the import.
If the import is successful, your imported contacts are shown in the directory.
Making a Mobile Phone Call by using Your Cisco SPA525G2
When you make a mobile phone call by using your Cisco SPA525G2, your
Cisco SPA525G2 acts as a handsfree device for your phone. The call is made
through your mobile phone, but the audio is present on and the call control is done
by using the Cisco SPA525G2. (See
Cisco SPA525G2 to Your Mobile Phone" section on page
To make a call through a mobile phone:
Press the line button associated with your mobile phone (the line button is marked
with a mobile phone icon with a flashing lightning bolt).
Do one of the following:
•
Enter a number on the dial pad and press Dial.
•
Press the Setup button and select Directories. Choose a number and press
Dial.
•
Scroll to recently-called number and press Select.
You probably do not dial a digit to reach an outside line on your mobile phone. If you
usually enter a digit before dialing (such as 9) to reach an outside line from the
Cisco SPA525G2 when it is not paired with a mobile phone, it might not be
necessary to do so when calling through your mobile phone; follow the usual
process for making calls on your mobile phone.
The outgoing call appears on both your Cisco SPA525G2 and your mobile phone
display. The Cisco SPA525G2 displays an off-hook icon next to the mobile phone
display name.
After the call is connected, the icon next to the mobile phone display shows that
the call is established. The audio goes through the Cisco SPA525G2, although the
mobile phone display also shows a connected call.
The layout and options shown on your phone screen might differ slightly,
depending on the type of phone system to which your Cisco SPA525G2 is
connected.
"Switching Audio from Your
4
66.)
65