Table of Contents
Advertisement
INCLUDED ACCESSORIES
c
Firmly tighten the mounting screws to
secure the main foot controller and side
pedal.
Memo
• To readjust the spacing between the main
foot controller and side pedal, slightly loosen
the mounting screws, and then adjust the
positions of the main foot controller and side
pedal.
d
Insert the plug for the side pedal into the
jack on the main foot controller.
e
Insert the plug for the main foot controller
into the foot controller jack on the right
side of the machine.
a Main foot controller
b Foot controller jack
Memo
• The length of the cord for the main foot
controller can be adjusted. (page 4)
f
Turn on the machine. And then touch
and display page 3 of the settings screen.
Memo
• Before specifying the functions, connect the
multi-function foot controller to the machine.
The settings screen is activated the first time
that the machine detects the multi-function
foot controller.
3
a
g
Select the functions to be performed by the
multi-function foot controller.
c
Controller
Functions that can be specified
a Main foot controller
Start/Stop
b Heel switch
Select any of the following:
• [Thread Cutting]
• [Needle Position – Up/Down]
c Side pedal
• [Single Stitch]
• [Reverse Stitch] (Reinforcement
Stitch) *
• [Presser Foot Up/Down]
• [No Setting]
*
If you set the "Reverse Stitch" function on the heel
switch, machine operates the same as pressing the
"Reverse Button" on the machine.
*
Reinforcement stitching may be applied depending
on the selected stitch pattern. For details, refer to
"Automatic Reinforcement Stitching" in the
machine's Operation Manual (Sewing).
Memo
• If you set [Reverse Stitch] on the side pedal,
you can create a darning stitch effect using
zigzag stitches. With both feet, keep pressing
the main foot controller, and repeat pressing
and releasing the side pedal to sew forward
and reverse in turn. Machine will reverse at
the speed you press the main foot controller.
h
Touch
.
a
b
c
Advertisement
Table of Contents
