hit counter script
Canon imagePROGRAF iPF8300S Basic Guide No.1 Basic Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Printer
  5. imagePROGRAF iPF8300S
  6. Basic manual
Canon imagePROGRAF iPF8300S Basic Guide No.1 Basic Manual

Canon imagePROGRAF iPF8300S Basic Guide No.1 Basic Manual

Large-format printers
Hide thumbs Also See for imagePROGRAF iPF8300S Basic Guide No.1:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Troubleshooting Manual, Basic Manual
Large-Format Printers
Basic Guide
Please read the following electronic
manuals also.
• User's Guide
• Paper Reference Guide
Read this manual before attempting to operate the printer.
Keep this manual in a handy location for future referencing.

Printer Operations

This Basic Guide includes three booklets.
Read this manual fi rst.
Safety Precautions ........................................2
How to read the Basic Guides ..........................6
Parts .................................................................8
Loading Rolls in the Printer ............................14
Loading Sheets in the Printer .........................20
Removing Sheets ...........................................22
Consumables..................................................23
Replacing Ink Tanks .......................................24
Replacing the Printhead .................................36
Menu Map.......................................................42
Troubleshooting ................................................2
If Roll Paper Jams ..........................................20
If a Sheet Jams...............................................22
If Paper is Soiled ............................................24
If Printing is Faint ............................................26
Misaligned ..................................................27
If Banding Occurs ...........................................29
If Line Length Does Not Match .......................31
Error Messages ..............................................33
Preparing to Transfer the Printer ......................2
Reinstalling the Printer .....................................8
1
ENG
1
2
3

Advertisement

Table of Contents
loading

Related Manuals for Canon imagePROGRAF iPF8300S Basic Guide No.1

Summary of Contents for Canon imagePROGRAF iPF8300S Basic Guide No.1

  • Page 1: Table Of Contents

    Large-Format Printers Basic Guide Please read the following electronic manuals also. • User's Guide • Paper Reference Guide Read this manual before attempting to operate the printer. Keep this manual in a handy location for future referencing. Printer Operations This Basic Guide includes three booklets. Read this manual fi...

  • Page 2: Safety Precautions

    Safety Precautions Follow the warnings and precautions below to use the printer safely. Do not perform any operations or procedures other than as described in this manual. Doing so may result in unexpected accidents and can cause a fi re or electrical shocks.

  • Page 3: Moving The Printer

    Caution █ Printer Location • Never install the printer on an unstable or vibrating surface. If it falls over, this could cause personal injury. • Never set up the printer in a location that is exposed to high humidity or large amounts of dust, or exposed to direct sunlight, high temperature, or open fl...

  • Page 4: Legal Notice

    We recommend ensuring ample space for installation. Trademarks Canon, the Canon logo, and imagePROGRAF are trademarks or registered trademarks of CANON INC. Microsoft and Windows are trademarks of Microsoft Corporation, registered in the U.S. and other countries. Macintosh is trademark of Apple Inc., registered in the U.S. and other countries.

  • Page 5: The Manuals Supplied With This Printer

    Media Information File from the imagePROGRAF website and installing it, you can update to the latest information of the Paper Reference Guide. If you cannot download fi le, contact your Canon dealer. To view the electronic manuals and imagePROGRAF website To view the electronic manuals and imagePROGRAF website, access the electronic manuals and imagePROGRAF website from imagePROGRAF Support Information as follows.

  • Page 6: How To Read The Basic Guides

    How to read the Basic Guides Symbols The following symbols are used in this document to indicate safety information and explanations of restrictions or precautions in use. Caution Important MEMO Cross-reference Additional sources of information are identifi ed as follows in the documentation. In the Basic Guides: In the electronic manuals: Text conventions and illustrations...
  • Page 7 Do not make any changes or modifi cations to the equipment unless otherwise specifi ed in the manual. If such changes or modifi cations should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Plaza, Lake Success, NY 11042, U.S.A. Tel No. 516-328-5600 For CA, USA Only Included battery contains Perchlorate Material - special handling may apply.

  • Page 8: Parts

    Parts Names and functions of printer parts are as follows. Front Name Top Cover Cutter Groove Ejection Guide Roll Holder Slot Roll Holder Ejection Support Output Stacker Paper Feed Slot Holder Stopper Ink Tank Cover Control Panel Release Lever Maintenance Cartridge Carrying Handles Maintenance Cartridge Cover Stand...
  • Page 9 Top Cover (Inside) Name Top Cover Roller Paper Alignment Line Carriage Carriage Shaft Paper Retainer Platen Borderless Printing Ink Grooves Cleaning Brush Fixed Blade Linear Scale Switch • Do not touch the Carriage Shaft (d), Fixed Blade (i), or Linear Scale (j). This may stain your hands and damage the printer.

  • Page 10: Loading Rolls In The Printer

    Parts Control Panel Name Display Screen Data Lamp (green) Message lamp (orange) Menu button Stop button Power button (green) Navigate button ► button ▲ button ▼ button OK button ◄ button Back button Cut button Feed button Load button Roll Media lamp (green) Cut Sheet lamp (green) •...

  • Page 11: Menu Operations

    Menu operations Navigate and perform menu operations on the control panel as follows. After the printer starts up, the Tab Selection screen is shown on the Display Screen . Information is organized in four tabs, and you can press control panel buttons to access menus and set or execute items for each tab.

  • Page 12: Attaching The Roll Holder To Rolls

    Attaching the Roll Holder to Rolls Attach the roll holder to rolls as follows. When printing on rolls, attach the Roll Holder to the roll. Rolls have a two- or three-inch paper core. Use the correct attachment for the paper core. The printer comes equipped with the 2-Inch Paper Core Attachment installed.
  • Page 13 Insert the respective attachments for the roll paper core on the Roll Holder and Holder Stopper . • Using rolls with a 2-inch paper core Holder Stopper Side Align the tips (a) of the 2-Inch Paper Core Attachment with the holes (b) of the Holder Stopper and insert it firmly.

  • Page 14: Loading Rolls In The Printer

    Loading Rolls in the Printer Load rolls in the printer as follows. • Always load rolls when the printer is on. If the printer is off when you load a roll, the paper may not be advanced correctly when you turn the printer on. •...
  • Page 15 Holding the Roll Holder so that the side with the white gear faces the side of the Roll Holder Slot with a white gear, load the Roll Holder shaft (a) into the grooves (b) on both ends of the Roll Holder Slot , fully into the slot. •...

  • Page 16: Convenient Printer Driver Features

    Loading Rolls in the Printer Lower the Ejection Guide . Holding the edge of the roll paper, lift the Release Lever . Hold the edge of the roll paper as you gently pull it evenly with both hands to the position of the Ejection Guide (a).
  • Page 17 Press ▲ or ▼ to select the type of paper, and then press the OK button. • For details on types of paper to select, see the Paper Reference Guide . (→ , The Manuals Supplied with This Printer) • Adjusting the printhead alignment with the type of paper to be used in printing may enhance printing quality.

  • Page 18: Removing The Roll From The Printer

    Removing the Roll from the Printer Remove rolls from the printer as follows. • If you need to cut a roll, see the following procedure. (→"Specifying the Cutting Method for Rolls," User's Guide) On the Tab Selection screen of the Control Panel , press ◄...
  • Page 19 Using both hands, rotate the Roll Holder in the direction of the arrow to rewind the roll. Holding the Roll Holder fl ange (a), remove the holder from the Roll Holder Slot . • See the following procedure for instructions on removing the Roll Holder from the roll. (→"Removing Rolls From the Roll Holder,"...

  • Page 20: Loading Sheets In The Printer

    Loading Sheets in the Printer Load sheets in the printer as follows. • Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it. • Load the paper straight. Loading paper askew will cause an error. •...
  • Page 21 With a sheet lengthwise and printing-side up, insert it between the Platen (a) and the Paper Retainer (b). Align the edges of the sheet as follows. Align the sheet with the Paper Alignment Line (c) at right. 2. Align the inserted edge of the sheet with the leading edge of the Paper Alignment Line (d), as shown.

  • Page 22: Removing Sheets

    Removing Sheets This section describes how to remove sheets from the printer. On the Tab Selection screen of the Control Panel , press ◄ or ► to select the Paper tab ( • If the Tab Selection screen is not displayed, press the Menu button. Press the OK button.

  • Page 23: Consumables

    Consumables Ink Tanks When purchasing ink tanks, make sure the following Ink Tank serial numbers are printed on the label. 330 ml (11.2 fl oz) • MBK Ink Tank PFI-304MBK • BK Ink Tank PFI-304BK • C Ink Tank PFI-304C •...

  • Page 24: Replacing Ink Tanks

    Replacing Ink Tanks Replace ink tanks as follows. Compatible ink tanks Replacement ink tanks in 330 ml (11.2 fl oz) and 700 ml (23.7 fl oz) capacities are supported. (→ , Consumables) Precautions when handling ink tanks Take the following precautions when handling ink tanks. •...

  • Page 25: Access The Menu For Ink Tank Replacement

    Access the menu for ink tank replacement On the Tab Selection screen of the Control Panel , press ◄ or ► to select the Ink tab ( • If the Tab Selection screen is not displayed, press the Menu button. Press the OK button.

  • Page 26: If Printing Is Faint

    Replacing Ink Tanks Lift the stopper (a) of the Ink Tank Lock Lever for the color to replace. Lift the Ink Tank Lock Lever until it stops, and then push it down to the front. • Push the Ink Tank Lock Lever down until it locks. •...

  • Page 27: If Vertical Lines Are Warped Or Colors Are Misaligned

    Install the ink tanks Before opening the pouch, tilt the Ink Tank to the left and right gently seven or eight times. Hold 330 ml ink tanks in one hand and 700 ml ink tanks in two hands, as shown. •...
  • Page 28 Replacing Ink Tanks Press the OK button and insert the Ink Tank into the holder with the ink hole facing down, as shown. • Ink tanks cannot be loaded in the holder if the color or orientation is incorrect. If the Ink Tank does not fi t in the holder, do not force it into the holder. Make sure the color of the Ink Tank Lock Lever matches the color of the Ink Tank , and check the orientation of the Ink Tank before reloading it.

  • Page 29: If Banding Occurs

    Make sure the Ink Lamp is lit. • If the Ink Lamp is not lit, reload the tank. Close the Ink Tank Cover . • After Ink Tank replacement, always close the Ink Tank Cover . If the Ink Tank Cover cannot close, some Ink Tank Lock Lever may not be closed completely.

  • Page 30: Replacing The Maintenance Cartridge

    Replacing the Maintenance Cartridge Replace the Maintenance Cartridge as follows. Compatible maintenance cartridges Use Maintenance Cartridge MC-08 . Precautions when handling the maintenance cartridge Take the following precautions when handling the Maintenance Cartridge . • Do not remove the Maintenance Cartridge except to replace it. •...

  • Page 31: If Line Length Does Not Match

    Access the menu for maintenance cartridge replacement On the Tab Selection screen of the Control Panel , press ◄ or ► to select the Settings/Adj. tab ( • If the Tab Selection screen is not displayed, press the Menu button. Press the OK button.

  • Page 32: Replace The Maintenance Cartridge

    Replacing the Maintenance Cartridge Replace the maintenance cartridge Open the Maintenance Cartridge Cover . Hold the used Maintenance Cartridge by the grip (a) with one hand and put your other hand under the Maintenance Cartridge to hold it fi rmly on the bottom, keeping it level as you pull it out.

  • Page 33: Error Messages

    Attach the packaging material to the used Maintenance Cartridge and put it in the box. Keep it level as you put it in the plastic bag. Expel excess air from the plastic bag and seal the zipper. Confi rm the Maintenance Cartridge is right-side up, put it in the box, and store it so that it stays level.
  • Page 34 Replacing the Maintenance Cartridge Press the OK button. The printer now initializes the Maintenance Cartridge . Next, replace the Shaft Cleaner .
  • Page 35 Replace the shaft cleaner After the message is displayed regarding Shaft Cleaner replacement, press ▲ or ▼ to select Yes , and then press the OK button. After the Carriage is moved, the Display Screen indicates Open Upper Cover . Open the Top Cover .

  • Page 36: Replacing The Printhead

    • If the Display Screen indicates Open top cover and replace the printhead. Replace both printheads. • If your Canon dealer has advised you to replace the Printhead Replace the Printhead as directed. Compatible printheads Use Printhead PF-05 . Precautions when handling the printhead Take the following precautions when handling the Printhead .

  • Page 37: Access The Menu For Printhead Replacement

    Access the menu for printhead replacement • When replacing the Printhead immediately after printing, wait a few minutes before replacing it. The metal parts of the Printhead become hot during printing, and there is a risk of burns from touching these parts. •...

  • Page 38: Replace The Printhead

    Replacing the Printhead Press the OK button. Ink is now fi lled. After about three minutes, a message is shown on the Display Screen instructing you to open the Top Cover . Replace the printhead Open the Top Cover . Instructions are now shown on the Display Screen regarding head replacement.
  • Page 39 Pull up the Carriage Cover to open it completely. Pull the Printhead Fixer Lever forward all the way to open it completely. Pull up the Printhead Fixer Cover to open it completely. Remove the Printhead and press the OK button. •...
  • Page 40 Replacing the Printhead Holding the new Printhead by the grips (a), remove it from the pouch. • When handling the Printhead , always hold it by the grips (a). Never touch the nozzles (b) or metal contacts (c). This may damage the Printhead and affect printing quality.
  • Page 41 Pull the Printhead Fixer Cover down toward the front to lock the Printhead in place. Push the Printhead Fixer Lever toward the back of the printer until it clicks. Push the Carriage Cover down toward the front. Close the Top Cover . Ink now fi...

  • Page 42: Menu Map

    Menu Map The structure of Tab Selection screen menus on the control panel is as follows. Values at right labeled with an asterisk ( ) are the defaults. For details on settings values, refer to the User's Guide. To access tab menus, press the Menu button to display the Tab Selection screen, press ◄ or ► to select the tab, and then press the OK button.
  • Page 43 Back Job Log Print Job Log Pause Print HDD Information Set./Adj. Menu Back Test Print Adjust Printer Maintenance Available after Auto(Advanced) in Head Posi. Adj. has been used once. Available when you have specified Feed Priority > Adj. Priority > Automatic or Print Quality. Back Document Name (Choose from information...
  • Page 44 Menu Map Back Interface Setup EOP Timer TCP/IP NetWare AppleTalk Ethernet Driver Interface Print Return Defaults System Setup Sleep Timer Buzzer Contrast Adj. Default setting for the time to enter the power save mode/Sleep mode is recommended. Not shown if you have set IPv4 Mode to Manual. *10: Not shown if you have set NetWare to Off.
  • Page 45 Back Date & Time Date Format Language Time Zone Length Unit Detect Mismatch Paper Size Basis Keep Paper Size Rep.P.head Print Nozzle Check CarriageScanWdth Use RemoteUI Reset PaprSetngs Erase HDD Data Output Method Print After Recv Common Box Set. Show Job Log Take-up Reel Use Take-up Reel Auto Feed...
  • Page 46 Index Numerics 2-Inch Paper Core Attachment ... 12 3-Inch Paper Core Attachment ... 12 Consumables... 23 Flange... 13 imagePROGRAF Support Information ... 5 Ink hole ... 26 Ink Lamp ... 25, 29 Ink tab ... 11, 25 Ink Tank Lock Lever ... 26, 28 Ink tank replacement ...
  • Page 48 Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Canon U.S.A., Inc. One Canon Plaza, Lake Success, NY 11042 U.S.A Canon Europe Ltd. 3 The Square, Stockley Park, Uxbridge, Middlesex, UB11 1ET United Kingdom Canon (China) Co., Ltd. 15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China Canon Australia Pty.

Table of Contents