Related Manuals for JVC DT-U17
Summary of Contents for JVC DT-U17
- Page 1 DT-U17 DT-U24 INSTRUCTIONS For Customer Use: Please read the Instruction Manual carefully and retain this information for future reference. Version: B...
-
Page 2: Safety Precautions
Safety Precautions The lighting flash with arrowhead symbol, within an equilateral triangle is CAUTION intended to alert the user to the presence of uninsulared “dangerous voltage” RISK OF ELECTRICAL SHOCK within the product’s enclosure that may DO NOT OPEN be of sufficient magnitude to constitute a risk of electric shock to persons. - Page 3 Safety Precautions (cont.) Under the following conditions, • Make enough room for inserting or removing the power plug. Turn off the power. Place the product as close to an AC outlet as possible. The 2. Unplug this product from the wall outlet. main power supply for the product is controlled by inserting or 3.
-
Page 4: Operating Precautions
Operating Precautions IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. -
Page 5: Table Of Contents
Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monitor or injury. * This manual is applicable to DT-U17 and DT-U24 , and the schematic diagram is taken as the appearance... - Page 6 Installation Do not rest your arm on the monitor or lean against the monitor. Do not touch the LCD panel when installing the monitor. Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monitor or injury. Using the monitor on U-stand The monitor package provides a U shape rotatable desktop stand to be installed.
-
Page 7: Index Of Parts And Functions
Index of Parts and Functions Rear panel SFP terminal adaptor. The SFP adaptor is optional purchased. E. AUDIO SDI (OUT) terminal (BNC) Output terminal for the SDI IN1 or SFP IN signal, supports 12G/6G/3G/HD/SD. E. AUDIO SDI (IN) terminals (BNC) Input terminals for the SDI signals: SDI IN1: 12G/6G/3G/HD/SD SDI IN2/3/4: 3G/HD/SD... -
Page 8: Front Panel
Index of Parts and Functions (cont.) Front panel Tally lamp This lamp is controlled by the tally function of the Make contact terminal. ( Page 16.) You can select the color of the tally lamp from "Green", "Red", or "Yellow". 10 11 Speaker: INPUT SELECTION keys... -
Page 9: Showing Input Signals
Showing Input Signals On the Information Display On the Status Display TC 00:15:13:07 Main Menu Status CAMERA 1 Exit&Status ＞ Channel Format Picture Adjustments ＞ Video Lumina Range XXXX Signal and Color ＞ in phase YUV Color Matrix XXXX Mg75 Mg75 Signal Scanning ＞... -
Page 10: The Operation Procedure
The Operation Procedure Note Press the “MENU” button to display the Main Menu. The items in gray means not available Press “ ” and “ ” to select submenu, the selected submenu highlights in yellow; to set up. Press “ ”... -
Page 11: Main Menu
Main Menu Picture Adjustments Setting for the picture preference. Item To do Setting value Contrast Adjusts the contrast of the display. -100 to +100 Brightness Adjusts the brightness of the display. -100 to +100 Chroma Adjusts the saturation of the display. -100 to +100 0 to 100 Sharpness... - Page 12 Sony_SLog3_Cin_HLG to Rec.2020 HLG Upload Position Description Sony_SLog3_SG3_HLG Sony_SLog3_SG3_HLG to Rec.2020 HLG J-Log1.cube JVC J-Log1 to Rec709 3DLUT cube Log-C.cube ARRI Log-C to Rec709 3DLUT cube *7 Import LUT’s S-Log2.cube SONY S-Log2 to Rec709 3DLUT cube The monitor has built-in calibrated 3DLUT cube, De-log S-Log3.cube...
- Page 13 Press “INFO” to quit the calibration process at any time. Brand Model The monitor will not be calibrated until process reaches 100%. X-rite i1 DISPLAY E0DIS3-DC0E (JVC dedicated version) JETI Specbos 1211 *11 Measure *10 Start Calibration The monitor has been calibrated in factory. And may need to be re-calibrated after a period of time.
- Page 14 Signal Scanning Item To do Setting value Scanning*1 Select a mode to t video to LCD panel Panel Fit, Pixel to Pixel, Native OFF, Top Left, Top, Top Right, Left, Center, Zoom Area Selection Select an area to zoom-in Right, Bottom Left,Bottom, Bottom Right Switch on/o the freeze frame OFF, ON Freeze Frame*3...
- Page 15 Tools & Information Setting for Vector scope and Histogram patterns Item Setting value To do Focus Assist Switch on focus assist mode and select color OFF, Blue, Red Zebra Switch on zebra stripes for over exposed image OFF, ON False Color *1 Switch on false color mode OFF, ON Blue Only...
- Page 16 *3 Time code Time Codes are not displayed on HDMI channel. When the menu opens, the time code appears at the bottom of the screen, otherwise at the top. Audio Setting for video/audio analysis functions Item To do Setting value Volume Adjust volume 0~100...
- Page 17 External Control Setting for TALLY, UMD, IP control to the monitor Setting value Item To do Tally Setting Set on-screen tally display mode OFF, ON, Blinking Tally Position Select the display position of on-screen tally Top, Bottom GPI Control Enable GPI control OFF, ON 1 Pin SFP, SDI1,SDI2, SDI3, SDI4, 4xSDI(2SI), 4xSDI(SQ),...
- Page 18 *2 UMD control *3 Webserver IP Control Select UMD mode to “External” will enable TSL UMD control. Connect the monitor ETHERNET port into LAN, and the monitor can be remote controlled by webpage. TallyMan system connection: Pin No Pin name RS485 IN ETHERNET Enter Menu- External Control - IP/Net Mask/Gateway/Port to...
- Page 19 Webserver page control interface After changing settings, please click the refresh button to see the new status.
- Page 20 System Setting User pro le saving, rmware update. Item To do Setting value Switch on multiview OFF,ON Multiview *1 Select a user pro le for all input sources Global User 1-8, OFF Select a user pro le for SFP input only Select a user pro le for SDI 1 input only SDI1 Select a user pro le for SDI 2 input only...
- Page 21 *3 Key Lock Select di erent keys to lock: Rotary knobs Key buttons The MENU button can be operated when key locked. Press the locked buttons or knobs, the screen will display: Key Locked *4 Closed Caption Only SDI signal system has closed caption menu items. *5 Firmware Update The monitor rmware can be updated by front USB port.
-
Page 22: General
Specifications General Model name DT-U17 DT-U24 Multi format LCD monitor Multi format LCD monitor Type 17.3” 23.8” Screen size 16:9 16:9 Aspect ratio “Available signals” on page 23 Compliant video signal format 12G SDI: SMPTE ST2080 6G SDI: 3840x2160 30/25/24p... -
Page 23: Dimensions
Specifications (cont.) Dimensions Unit: mm 88.72 442.30 39.92 DT-U 17 100.00 200.00 35.23 145.00 88.70 588.40 39.91 DT-U 24 100.00 200.00 35.23 145.00... -
Page 24: Available Signals
Specifications (cont.) Available signals The following signals are available for this monitor. Video signals Input terminal Signal format shown in the Status Display as Formats SDI 1 & SFP SDI 2/3/4 Quadlink SDI SDI & SFP HDMI HDMI — — 720×480/60I 720*480I60 720*480I60... - Page 25 Service Contacts: Importer (EU only) JVCKENWOOD U.K. Limited 12 Priestley Way, London NW2 7BA, UNITED KINGDOM Importeur (Nur EU) JVCKENWOOD Deutschland GmbH Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, DEUTSCHLAND Importatore (Solo EU) JVCKENWOOD Italia S.p.A. Via G. Sirtori 7/9, 20129 Milano, ITALIA Importatore (Solo UE) JVCKENWOOD Europe,B.V.-Spain Carretera de Rubi, 88 Planta 1A...
- Page 26 The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.