Tap Install New Device. Scan the QR code on the Quick
Installation Card. Follow the on-screen instructions to complete
/
the setup.
TECH TIP: Consider using the same Wi-Fi name and password as your old router. This will allow your existing Wi-Fi devices to automatically connect to your new router.
You're all good to go! Once the setup is complete, you can connect your devices using the Wi-Fi name (SSID) and password that you created during
the setup. Enjoy the Internet!
D-Link Wi-Fi
QUICK INSTALLATION CARD
SETUP QR CODE
Model Name: DEVICE
Wi-Fi Name: dlink-XXXX
Password: XXXXXXXX
S/N: 123456789
www.dlink.com
PACKAGE CONTENTS
•
DIR-X3260 || AX3200 Mesh Wi-Fi 6 Router
•
Power Adapter
•
Ethernet Cable
•
Quick Installation Guide
•
Quick Installation Card
OPTION 2
WEB BROWSER SETUP
1
Plug the router into a power source. Make sure that the power button
/
is on. Wait for the wireless LED's to be lit solid.
2.4
5G
2
Connect your computer to the Wi-Fi details printed on the
Quick Installation Card. Type http://dlinkrouter.local./ or
/
http://192.168.0.1 into a web browser. You will be asked
for your Device/Admin Password. By default this password is
"password". Type that in and follow the on-screen instructions
Page 2
Where such specific license terms entitle you or GNU Lesser General Public License (“LGPL”). As to the source code of such software, D-Link will applicable, the terms of the GPL and LGPL, and provide upon written request via email and/or...