en Table of Contents Safety and warning information ... 3 Super cooling ........11 Information concerning disposal ..6 Interior fittings ........12 Scope of delivery ........6 Sticker “OK” .......... 12 Installation location ........ 7 Switching off and disconnecting the Ambient temperature and ventilation .
switch off the appliance and enTable of Contentse n I n s t r u c t i o n f o r U s e R e f r i g e r a t o r ■ Safety and warning pull out the mains plug, information inform customer service.
Page 4
Do not use multiple sockets, Do not use pointed or sharp- ■ extension leads or adapters. edged implements to remove frost or layers of ice. You Fire hazard might damage the refrigerant Portable multiple outlets or tubes.Leaking refrigerant may power supplies may overheat, cause eye injuries or ignite.
Page 5
Avoiding placing children Children in the household ■ and vulnerable people at Keep children away from ■ risk: packaging and its parts. At risk here are children, Danger of suffocation from people who have limited folding cartons and plastic physical, mental or sensory film! abilities, as well as people Do not allow children to play...
Warning Information concerning Redundant appliances disposal 1. Pull out the mains plug. 2. Cut off the power cord and discard * Disposal of packaging with the mains plug. The packaging protects your appliance 3. Do not take out the trays from damage during transit.
Note Installation location If the appliance is placed on its back, ensure that the wall spacer is not fitted. A dry, well ventilated room is suitable as an installation location. The installation location should not be exposed to direct Ambient temperature sunlight and not placed near a heat source, e.g.
For appliances operated in non- Connecting European countries, check whether the indicated voltage and current type match the appliance the values of your electricity supply. This information can be found on the rating After installing the appliance, wait at least plate, Fig.
Controls Getting to know your Fig. " appliance On/Off button Serves to switch the appliance on and off. “super” button Is used to switch on the super cooling (see chapter entitled “Super cooling”). Temperature selection button Press this button to set the Please fold out the illustrated last page.
Operating tips Switching off the alarm Fig. " While the refrigeration unit is running, ■ Press the alarm button 5 to switch off water droplets or a thin layer of ice the warning signal. may form at the rear panel of the refrigerator.
Note Notes Avoid contact between food and rear Fruit sensitive to cold (e.g. pineapple, ■ panel. Otherwise the air circulation will banana, papaya and citrus fruit) and be impaired. vegetables sensitive to cold (e.g. aubergines, cucumbers, zucchini, Food or packaging could freeze to peppers, tomatoes and potatoes) the rear panel.
Bottle holder Interior fittings Fig. , The bottle holder prevents bottles from (not all models) falling over when the door is opened and closed. Glass shelves Fig. ' If required, you can vary the shelves Sticker “OK” inside the appliance: To do this, pull out shelf, lift at the front and take out.
Disconnecting the appliance Interior fittings All variable parts of the appliance If you do not use the appliance can be taken out for cleaning. for a prolonged period: Take out glass shelves 1. Switch off the appliance. Fig. ' 2. Pull out mains plug or switch off fuse. To do this, pull out shelf, lift at the front 3.
Light (LED) Operating noises Your appliance features a maintenance- Quite normal noises free LED light. Droning These lights may be repaired Motors are running (e.g. refrigerating by customer service or authorised units, fan). technicians only. Bubbling, humming or gurgling noises Refrigerant is flowing through the tubing.
Eliminating minor faults yourself Before you call customer service: Please check whether you can eliminate the fault yourself based on the following information. Customer service will charge you for advice – even if the appliance is still under guarantee! Fault Possible cause Remedial action Temperature differs greatly...
Fault Possible cause Remedial action Appliance is not cooling, Showroom mode is Hold down alarm button, Fig "/5, for temperature display and light switched on. 10 seconds until an acknowledgement signal are lit. sounds. After a short time check whether your appliance is cooling.