HP OmniBook 7100 User Manual page 38

Hp omnibook 7100: user guide

Hide thumbs Also See for OmniBook 7100:

Table of Contents

1. From the Start menu, shut down the OmniBook.

If you have a plug-and-play operating system, such as Windows 95, you do not

need to turn off the OmniBook before inserting it into the dock.

Caution

Use only an HP F1454A ac adapter (the type shipped with your OmniBook).

Using any other ac adapter could damage the OmniBook and may void your

warranty. Refer to the warranty statement for your product.

2. Plug the power cord into the ac adapter, then into an ac outlet. Plug the ac

adapter into the dock.

3. On the rear of the OmniBook, slide the docking door to the left.

4. Place the OmniBook on the dock platform, with the rear of the computer facing

the dock's docking connector.

5. Position your fingers on the platform grips as shown below. Use your thumbs to

push the computer into the dock until the computer slides into place.

Table of Contents