Table of Contents
Advertisement
3. If being used in a mesh deployment, the MR20-HW should have line of sight to at
least two other Meraki devices. A Cisco Partner can help ensure that your AP
placement is ideal.
Mount the MR20-HW
Attach the MR20-HW to the Mount Cradle
The MR20-HW attaches to the mount cradle with two tabs on the cradle that insert into
the MR20-HW, and is secured to the cradle using one screw.
To attach the MR20-HW to the mount cradle properly, line up the top edge of the AP with
the top tab of the mount cradle. Since the cradle is already mounted to the wall, guide
the MR20-HW towards the top tab and insert the top tab into the MR20-HW's slot.
Then adjust the MR20-HW to guide the MR20-HW's bottom slot into the cradle's bottom
tab until it clicks into place. Once in place, the MR20-HW should be secured to the cradle
by using one of the included screws in the cradle's bottom tab.
Advertisement
Table of Contents
