SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
The appliance must be connected to the water mains using the • new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. Old hose sets must not be reused. • If the mains power supply cable is damaged, it must be •...
• Use original spare parts only. WARNING! Risk of injury, electrical DISPOSAL shock, fire, burns or damage to the WARNING! Risk of injury or appliance. suffocation. • This appliance is for household use only. • Follow the safety instructions on the detergent •...
CHILD SAFETY DEVICE This device prevents children or pets to be closed in the drum. Turn the device clockwise, until the groove is horizontal. You cannot close the door. To close the door, turn the device anticlockwise until the groove is verti- cal.
Page 6
A. The Temperature area: • : The no spin indicator : Temperature indicator • : The Rinse Hold indicator : Cold water indicator • : The night cycle indicator : Time Manager indicator : The door locked indicator C. The time area: •...
Page 7
Maximum load Programme Programme description Maximum spin Temperature range (Type of load and soil level) speed 2 kg Machine washable wool, hand washable wool and Wool/Hand- 1200 rpm delicate fabrics with «hand washing» care symbol. wash (wool/hand- wash) 40°C - (Cold) 7 kg To spin the laundry and to drain the water in the drum.
Page 8
Maximum load Programme Programme description Maximum spin Temperature range (Type of load and soil level) speed To switch the appliance on or off and for cancelling the programme which is running. On/Off 1) Standard programmes for the "EU" Energy Label consumption values. According to regulation 1061/2010, these programmes are respectively the «Standard 60°C cotton programme»...
Approximate Energy con- Water con- Remaining programme Programmes Load (kg) sumption sumption (li- duration (mi- moisture (%) (kWh) tre) nutes) Standard 60°C cot- 0.920 1) At the end of spin phase. 2) Not available for some models. OPTIONS • The washing programme stops with the water in TEMP the drum.
Page 11
Use this option for heavy soil. When you set this option the programme duration increases. The related indicator comes on. EXTRA RINSE With this option you can add some rinses to a washing programme. Use this option for persons allergic to detergents and in areas where the water is soft.
BEFORE FIRST USE 1. Make sure that the electrical and water 4. Set and start a programme for cotton at the connections comply with the installation highest temperature without laundry. instructions. This removes all possible dirt from the drum and the 2.
Page 13
The drain pump can operate for a short time at the beginning of the washing cycle. STARTING A PROGRAMME WITH THE DELAY START OPTION 1. Press the button Delay Start again and again until the display shows the delay you Measure out the fabric Carefully close the deter- want to set.
2. Turn the programme knob again to activate the • In the display three flashing zeros come on. appliance. Now, you can set a new washing • The indicator of theStart/Pause goes off. programme. • The door lock indicator goes off. Before starting the new programme •...
• Be careful with the curtains. Remove the hooks • To help the environment, do not use more than and put the curtains in a washing bag or the correct quantity of detergent. pillowcase. • Obey the instructions that you find on the on •...
DOOR SEAL Close the drawer and run Regularly examine the the rinse programme with- seal and remove all ob- out any clothes in the jects from the inner part. drum. CLEANING THE DRAIN FILTER CLEANING THE DETERGENT DISPENSER The pump should be inspected regularly and Clean regularly the washing powder and additive particularly if: dispenser drawer.
CLEANING THE INLET HOSE AND THE VALVE Clean the filter under a FILTER tap, to remove any traces of fluff. Remove foreign bodes and fluff from the filter seat and from the pump impeller. Check carefully whether the pump impeller rotates (it rotates jerkily).
TROUBLESHOOTING • - The appliance does not drain the water. WARNING! Refer to Safety chapters. • - The appliance door is open or not closed correctly. Please check the door! INTRODUCTION • - The mains supply is unstable. Wait until the mains supply is stable.
Page 19
Problem Possible solution Make sure that the drain hose has no kinks or bends. Make sure that the drain filter is not clogged. Clean the filter, if neces- sary. Refer to "Care and cleaning". Make sure that the connection of the drain hose is correct. Set the drain programme if you set a programme without drain phase.
After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Authorised Service Centre. If the display shows other alarm codes. Deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre.