LG E2242S Owner's Manual page 10
Led lcd monitor
Hide thumbs
Also See for E2242S:
- Owner's manual (33 pages) ,
- Owner's manual (31 pages) ,
- Owner's manual (31 pages)
Table of Contents
Advertisement
10
USING THE MONITOR SET
CAUTION
y
Connect the signal
input cable and tighten
it by turning the screws
clockwise.
y
Do not press the screen with your finger for
a long time as this may result in temporary
distortion on the screen.
y
Avoid displaying a fixed image on the
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
NOTE
y
When you want to use two PC in our Monitor,
please connect the signal cable(D-SUB/
DVI-D) respectively in Monitor set.
y
If you turn the Monitor set on while it is cold,
the screen may flicker. This is normal.
y
Some red, green, or blue spots may appear
on the screen. This is normal.
Self Image Setting Function
Press the power button on the bottom panel to
turn the power on. When monitor power is turned
on, the
"Self Image
Setting" Function is executed
automatically. (Only supported in Analog Mode)
INPUT /
MODE /
AUTO /
EXIT
NOTE
y
"Self Image Setting" Function.
This function provides the user with optimal
display settings.When the user connects
the monitor for the first time, this function
automatically adjusts the display to optimal
settings for individual input signals.(Only
supported in Analog Mode)
y
'AUTO' Function.
When you encounter problems such as
blurry screen, blurred letters, screen flicker
or tilted screen while using the device or
after changing screen resolution, press the
AUTO function button to improve resolution.
(Only supported in Analog Mode)
Advertisement
Table of Contents
