Related Manuals for D-Link COVRC1200A1
Summary of Contents for D-Link COVRC1200A1
- Page 1 DUAL-BAND WHOLE HOME HIGH-POWER WI-FI SYSTEM Covr your whole home in High-Power Wi-Fi High-Performance More Coverage One Seamless Network COVR-C1203/C1200 DUAL-BAND WHOLE HOME HIGH-POWER WI-FI SYSTEM USER MANUAL...
- Page 2 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
-
Page 3: Table Of Contents
Device ................46 COVR-C1200 Side Panel ............6 Upgrade .................47 Hardware Setup ................7 Statistics .................48 Using The D-Link Wi-Fi App ..........7 Adding Additional Extenders .........49 Manual Installation ............10 Using Wi-Fi Protected Setup (WPS) ........50 Completing Setup ..............12 Using the Web User Interface ..........52 Web Interface Setup Wizard ...........13... -
Page 4: Product Overview
Package Contents COVR-C1200 Ethernet Cable Whole Home Powerline Wi-Fi Extender (x 3) Quick Installation Guide Wi-Fi Configuration Card Wi-Fi Configuration Note If any of the above items are missing or damaged, please contact your local reseller. D-Link COVR-C1203 User Manual... -
Page 5: System Requirements
• Firefox 28 or higher • Safari 6 or higher • Chrome 28 or higher • iOS or Android smartphone or tablet. (Please refer to the mobile D-Link Wi-Fi Requirements app's store page to check whether your device is compatible) D-Link COVR-C1203 User Manual... -
Page 6: Introduction
AC1200 Wi-Fi and uses your home’s existing electrical wiring to transfer data through a dedicated channel at high speeds. This allows the COVR-C1200 to bring the uncompromised, full potential of AC1200 Wi-Fi to any area in your home, offering true whole home coverage. With the COVR-C1203, D-Link has got you Covr’d. Features • High-Power Wi-Fi - Most whole home Wi-Fi systems use multiple low-performance devices to disperse Wi-Fi... - Page 7 Scale up your Wi-Fi by adding another extender to get true whole-home coverage. • Easy Setup - Using the free D-Link Wi-Fi app or the intuitive web-based user interface, you can quickly set up the COVR-C1203 and configure your network with your specific settings in a matter of minutes.
-
Page 8: Hardware Overview
Solid orange The COVR-C1200 is booting up. COVR The COVR-C1200 is syncing to another COVR-C1200 extender using Simple Connect, or to a Blinking (every 1s) wireless client using Wi-Fi Protected Setup (WPS). The COVR-C1200 is powered off. D-Link COVR-C1203 User Manual... -
Page 9: Covr-C1200 Side Panel
(WPS). This button is also used to sync with additional COVR-C1200 extenders. Cover Plate Removal Press this button to release the top cover plate on the device to replace it with a different color plate. Button D-Link COVR-C1203 User Manual... -
Page 10: Hardware Setup
To get the D-Link Wi-Fi app, browse the App Store or Google Play and search for D-Link Wi-Fi. You can also scan the QR code on the right, which will take you to the respective D-Link Wi-Fi app store page directly. - Page 11 Section 2 - Installation Using The D-Link Wi-Fi App (continued) 1. Open the D-Link Wi-Fi app and tap Install Your Device at the bottom. 2. Next, select COVR-C1203 from the list and tap NEXT. update image D-Link COVR-C1203 User Manual...
- Page 12 Section 2 - Installation Using The D-Link Wi-Fi App (continued) 3. When asked to create a new network, or add to an existing network, choose Create a new Covr network and tap NEXT. update image 4. You will now be guided through a step-by-step process for setting up the COVR-C1203 hardware.
-
Page 13: Manual Installation
Manual Installation If you do not wish to use the D-Link Wi-Fi app, you can also choose to manually set up the COVR-C1203 and configure your Covr Wi-Fi network using the web-based user interface. Follow the instructions below for how to set up your COVR-C1203 Dual Band Whole Home Wi-Fi System. - Page 14 3. Type http://covr.local./ into a web browser and follow the on-screen instructions to complete the setup. http://covr.local./ The COVR-C1203 is now ready to be configured using the web-based user interface, or the free D-Link Wi-Fi mobile app. Completing Setup on page 12 Proceed to for more information on how to configure your device.
-
Page 15: Completing Setup
There are several ways you can configure your extenders to connect to the Internet and connect to your clients: • D-Link Setup Wizard - This wizard will launch when you log into the extender's web-based user interface for the first time. -
Page 16: Web Interface Setup Wizard
Once the web user interface's home page has loaded, the Setup Wizard window will automatically pop up. The wizard is designed to guide you through a step-by-step process to configure your new D-Link Powerline extender and connect to the Internet. -
Page 17: Configuration - Covr-C1200
The bar at the top of the page has quick access to Settings and Management functions. You may quickly jump back Home at any time. Note: The system will automatically log out after a period of inactivity. D-Link COVR-C1203 User Manual... -
Page 18: Home
Refer to the following pages for a description of each section. The Home page displays whether or not the extender is connected to your router. D-Link COVR-C1203 User Manual... -
Page 19: Internet
Clicking on the Internet icon brings up basic information about connection between the COVR-C1200 and your home router. Specifically, this will list the connection type to the router, the current network status, and how long the connection to the router has been active for. D-Link COVR-C1203 User Manual... -
Page 20: Covr-C1200
Click on the COVR-C1200 icon to view details about the and its wireless and local network settings. This includes IPv4 and IPv6 local network, and Wi-Fi information. This overview is only informational. To configure these sections, please refer to the corresponding configuration sections in this manual. D-Link COVR-C1203 User Manual... -
Page 21: Connected Clients
The schedule may be set to Always Off, or you can create your own schedules in the Schedule section. Refer to Schedule on page 54 for more information. Click Save when you are done. D-Link COVR-C1203 User Manual... -
Page 22: Extenders
To edit a Covr Point’s settings, click the pencil icon on the Covr Point you want to edit. Name: Enter a name for the Covr Point. MAC Address: Displays the MAC address of the device. Click Save when you are done. D-Link COVR-C1203 User Manual... -
Page 23: Settings
For PPPoE refer to page 23. For PPTP refer to page 25. For L2TP refer to page 27. For DS-Lite refer to page 29. IPv6 link. Refer to page <?>. To configure an IPv6 connection, click the D-Link COVR-C1203 User Manual... - Page 24 The default MAC address is set to the physical interface MAC address Clone: of port 1 on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link COVR-C1203 User Manual...
- Page 25 The default MAC address is set to the physical interface MAC address Clone: of port 1 on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link COVR-C1203 User Manual...
- Page 26 Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. D-Link COVR-C1203 User Manual...
- Page 27 The default MAC address is set to the physical interface MAC address Clone: of port 1 on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link COVR-C1203 User Manual...
- Page 28 Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. D-Link COVR-C1203 User Manual...
- Page 29 Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link COVR-C1203 User Manual...
- Page 30 Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. D-Link COVR-C1203 User Manual...
- Page 31 Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link COVR-C1203 User Manual...
- Page 32 Enter the B4 IPv4 address value used here. WAN IPv6 Once connected, the WAN IPv6 address will be displayed here. Address: IPv6 WAN Default Once connected, the IPv6 WAN default gateway address will be Gateway: displayed here. Click Save when you are done. D-Link COVR-C1203 User Manual...
-
Page 33: Ipv6
For PPPoE refer to page <?>. For IPv6 in IPv4 Tunnel refer to page <?>. For 6 to 4 refer to page <?>. For 6rd refer to page <?>. For Local Connectivity Only refer to page <?>. D-Link COVR-C1203 User Manual... - Page 34 Displays the router’s LAN link-local address. Local Address: If Enable DHCP-PD is disabled, these additional parameters are available for configuration: LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link- Displays the router’s LAN link-local address. Local Address: D-Link COVR-C1203 User Manual...
- Page 35 IPv6 Address Enter the starting IPv6 address for the DHCP server’s IPv6 assignment. Range (Start): IPv6 Address Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. Range (End): Click Save when you are done. D-Link COVR-C1203 User Manual...
- Page 36 Section 3 - Configuration Static IPv6 Select Static IP if your IPv6 information is provided by your Internet Service Provider (ISP). D-Link COVR-C1203 User Manual...
- Page 37 Select Auto Configuration if your ISP assigns your IPv6 address when your router requests one from the ISP’s server. Some ISPs require you to adjust settings on your side before your router can connect to the IPv6 Internet. D-Link COVR-C1203 User Manual...
- Page 38 Section 3 - Configuration PPPoE Select PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the Internet. D-Link COVR-C1203 User Manual...
- Page 39 Section 3 - Configuration In this section the user can configure the IPv6 6rd connection settings. D-Link COVR-C1203 User Manual...
- Page 40 If you selected Enable ULA and disabled Default ULA Prefix: ULA Prefix: Enter your own ULA prefix. Current IPv6 ULA Settings Current ULA Displays the current ULA prefix. Prefix: LAN IPv6 ULA: Displays the LAN's IPv6 ULA. Click Save when you are done. D-Link COVR-C1203 User Manual...
- Page 41 Enter the VLAN ID for your Voice over IP network as provided by your ISP. If Priority ID is enabled: Priority ID: Select a priority ID from the drop-down menu to assign to the corresponding VLAN. D-Link COVR-C1203 User Manual...
- Page 42 Interface Traffic Type Setting LAN Port 1, From the drop-down menu, you can select the type of data coming Wireless, Wireless from the WAN connection to each interface on the COVR-C1200. Guest Zone: Click Save when you are done. D-Link COVR-C1203 User Manual...
- Page 43 Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page for more information. D-Link COVR-C1203 User Manual...
- Page 44 Enable or disable WPS Push Button Configuration (PBC) fuctionality. Enabling this feature allows wireless clients to connect to the Covr Wi-Fi through an encrypted connection by using the WPS button. Click Save when you are done. D-Link COVR-C1203 User Manual...
- Page 45 Section 3 - Configuration Guest Zone D-Link COVR-C1203 User Manual...
-
Page 46: Advanced
If you want to remove a priority assignment from a device and return it to the Connected Clients list, click the cross (x) in the top right of the device card. Click Save when you are done. D-Link COVR-C1203 User Manual... -
Page 47: Management
NTP server from the drop-down menu. To configure the extender's time and date manually, disable this option and use the drop-down menus that appear to input the time and date. Click Save when you are done. D-Link COVR-C1203 User Manual... -
Page 48: Schedule
To remove a time period from the schedule, click on the cross icon at the end of the highlighted section. Click Apply when you are done. D-Link COVR-C1203 User Manual... -
Page 49: System Log
If E-mail notification is Enabled: From E-mail Enter the email address your SysLog messages will be sent from. Address: To E-mail Address: Enter the email address your SysLog messages will be sent to. D-Link COVR-C1203 User Manual... - Page 50 The schedule may be set to Always, or you can create your own schedules in the Schedule section. Refer to Schedule on page 54 for more information. Click Save when you are done. D-Link COVR-C1203 User Manual...
-
Page 51: System Admin
Note: If you previously changed the management link in the Network section, replace covr.local./ with the new management link. Click Save when you are done. D-Link COVR-C1203 User Manual... -
Page 52: Device
Wi-Fi network will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedule section. Refer to Schedule on page 54 for more information. Click Apply when you are done. D-Link COVR-C1203 User Manual... -
Page 53: Upgrade
If you wish to upgrade manually, first download the firmware file you wish to upgrade to. Next, click the Select File button and browse to the Firmware: firmware file you want to install. With the file selected, click Upload to begin the upgrade process. D-Link COVR-C1203 User Manual... -
Page 54: Statistics
The graph will update in real time. To clear the information on the graph, click Clear. The traffic counter will reset if the device is rebooted. D-Link COVR-C1203 User Manual... -
Page 55: Adding Additional Extenders
• Web User Interface - Add additional extenders using the COVR-C1200's web user interface. Refer to Using the Web User Interface on page 64. • D-Link Wi-Fi App - Use your Android device, iPhone, iPad, or iPod touch to add an extra Powerline extender. Refer to Using the D-Link Wi-Fi App on page 65. -
Page 56: Using Wi-Fi Protected Setup (Wps)
1. Plug the new COVR-C1200 extender into a power socket near the existing router-connected COVR-C1200 extender. 2. Once plugged in, wait for the Power, 2.4G, and 5G LEDs on the new extender to light up solid green, as shown in the image to the right. D-Link COVR-C1203 User Manual... - Page 57 This indicates the new extender has successfully synced with your existing Covr Powerline network. 5. Unplug the new extender and relocate it anywhere in your home where you want to extend coverage to. Repeat this process to add additional COVR-C1200 extenders. D-Link COVR-C1203 User Manual...
-
Page 58: Using The Web User Interface
2. The Setup Wizard window will appear. Press the WPS button on the new extender within the time limit shown on the screen. Follow any additional instructions to complete the process. Repeat this process to add additional COVR-C1200 extenders. D-Link COVR-C1203 User Manual... -
Page 59: Using The D-Link Wi-Fi App
You can also add additional extenders using your mobile device. Refer to the steps below to learn how to add more COVR-C1200 extenders to your Powerline network using the D-Link Wi-Fi app. 1. Open the D-Link Wi-Fi app and tap Install Your Device at the bottom. D-Link COVR-C1203 User Manual... - Page 60 Section 4 - Adding Additional Extenders Using the D-Link Wi-Fi App (continued) 2. Next, select COVR-P2502 from the list and tap NEXT. 3. When asked to create a new network, or add to an existing network, choose Add to an existing network and tap NEXT.
- Page 61 Section 4 - Adding Additional Extenders Using the D-Link Wi-Fi App (continued) 4. You will now be guided through a step-by-step process for setting up the new COVR-C1200 extender. Simply follow the on-screen steps to complete the installation process. Repeat this process to add additional COVR-C1200 extenders.
-
Page 62: Connect To A Wireless Client
Step 2 - Within 120 seconds, press the WPS button on your wireless device (or launch the software utility and start the WPS process). Step 3 - Allow up to 1 minute for your connection to be configured. Once the Power LED stops blinking, you will be connected and your wireless connection will be encrypted with WPA2. D-Link COVR-C1203 User Manual... -
Page 63: Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers. -
Page 64: What Is Wireless
Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. - Page 65 Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home uses/benefits • Gives everyone at home broadband access •...
-
Page 66: Tips
The wireless connection in public places is usually called “hotspots”. Using a D-Link USB adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coffee shops, libraries, restaurants, and convention centers. -
Page 67: Technical Specifications
• 3.5 W Temperature • Operating: 0 to 40 °C (32 to 104 °F) • Storage: -20 to 70 °C (-4 to 158 °F) Humidity • Operating: 10% to 90% non-condensing • Storage: 5% to 90% non-condensing D-Link COVR-C1203 User Manual... - Page 68 This product may interfere with devices such as lighting systems that have a dimmer switch or a touch-sensitive on/off feature, short wave radios, or other Powerline devices that do not follow the HomePlug AV standard. D-Link COVR-C1203 User Manual...
-
Page 69: Regulatory Information
Note The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be fixed to USA operational channels only. D-Link COVR-C1203 User Manual... - Page 70 This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. D-Link COVR-C1203 User Manual...
- Page 71 2. le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer à la limite de p.i.r.e.; D-Link COVR-C1203 User Manual...
- Page 72 être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. NCC 警語 ： 以下警語適用台灣地區 依據 低功率電波輻射性電機管理辦法 第十二條: 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變 更原設計之特性及功能。 第十四條: 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至 無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工 業、科學及醫療用電波輻射性電機設備之干擾。 電磁波曝露量MPE標準值(MPE) 1 mW/cm ，送測產品實值為 0.3693 mW/cm 應避免影響附近雷達系統之操作 。 高增益指向性天線只得應用於固定式點對點系統 。 D-Link COVR-C1203 User Manual...
- Page 73 Potencia máxima de Salida Frequenza/e Potenza max. Output Frequentie(s) Max. Output Power 5.15 – 5.25 GHz 200 mW 5.25 – 5.35 GHz 200 mW 5.47 – 5.725 GHz 2.4 G 2.4 – 2.4835 GHz 100 mW D-Link COVR-C1203 User Manual...
- Page 74 υλικολογισμικό του προϊόντος είναι διαθέσιμα για λήψη από τη σελίδα του προϊόντος στην τοποθεσία www.dlink. com. Par les présentes, D-Link Corporation déclare que ce produit, ces accessoires et ce logiciel sont conformes aux Français [French] directives 2014/53/UE.Le texte complet de la déclaration de conformité de l'UE et le icroprogramme du produit sont disponibles au téléchargement sur la page des produits à...
- Page 75 2014/53/EU. Pełen tekst deklaracji zgodności UE oraz oprogramowanie sprzętowe do produktu można pobrać na stronie produktu w witrynie www.dlink.com. Desta forma, a D-Link Corporation declara que este produto, os acessórios e o software estão em conformidade Português [Portuguese] com a diretiva 2014/53/UE. O texto completo da declaração de conformidade da UE e do firmware...
- Page 76 Appendix C - Safety Statements Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun Íslenska [Icelandic] 2014/53/EB. Sækja má ESB-samræmisyfirlýsinguna í heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www.
- Page 77 Access Points unterstützen die Funktionen DFS (Dynamic Frequency Selection) und TPC (Transmit Power Control) wie erforderlich bei Betrieb auf 5 GHz innerhalb der EU. • Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt. D-Link COVR-C1203 User Manual...
- Page 78 5 Ghz dentro de la UE. • Por favor compruebe el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalámbricas de 2.4 GHz y/o la de 5 GHz. D-Link COVR-C1203 User Manual...
- Page 79 Toegangspunten ondersteunen DFS (Dynamic Frequency Selection) en TPC (Transmit Power Control) functionaliteit zoals vereist bij gebruik in 5 GHz binnen de EU. • Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz. D-Link COVR-C1203 User Manual...
- Page 80 • Halten Sie das Produkt von Heizkörpern und anderen Quellen fern, die Wärme erzeugen. • Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschließlich ein trockenes fusselfreies Tuch. D-Link COVR-C1203 User Manual...
- Page 81 • Mantenga el producto alejado de los radiadores y de otras fuentes de calor. • Desenchufe siempre el producto de la alimentación de red antes de limpiarlo y utilice solo un paño seco sin pelusa. D-Link COVR-C1203 User Manual...
- Page 82 • Houd het product uit de buurt van radiators en andere warmtebronnen. • U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link COVR-C1203 User Manual...
- Page 83 D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions.
- Page 84 D-Link et l’environnement Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages.
- Page 85 D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies.
- Page 86 D-Link a životní prostředí Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
- Page 87 D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i produktene og forpakningen. D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp.
- Page 88 D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og reducere CO2-udledningerne.
- Page 89 D-Link och miljön På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med låg gifthalt i både produkter och förpackningar.