Page 1
ENGLISH Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. 55UR347H9UA ESPAÑOL Guía Rápida de Configuración Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas.
Page 2
ENGLISH Read Safety and Reference. WARNING : To prevent injury, this apparatus must be securely attached to the desk/wall in accordance with the Safety and Reference. ESPAÑOL Leer Seguridad y Consultas. ADVERTENCIA : Para prevenir daños, este aparato debe ser instalado a la mesa/pared de acuerdo a la guía de Seguridad y Consultas. FRANÇAIS Lisez Sécurité...
Important Safety Instruction • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. •...
Warning! Safety instructions - Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning. - Do not install in excessively dusty places. Otherwise, this may result in fire, electric shock, CAUTION combustion/ explosion, malfunction or product deformation.
Page 18
• Use only an authorized attachments / accessories - TV with a three-prong grounded AC plug must be approved by LG Electronics. Otherwise, this may connected to a three-prong grounded AC outlet. result in fire, electric shock, malfunction, or product Ensure that you connect the earth ground wire to damage.
• Moving • The device must be easily accessed to a location - When moving, make sure the product is turned outlet near the access. Some devices are not made off, unplugged, and all cables have been removed. by turning on / off button, turning off the device It may take 2 or more people to carry larger TVs.
• Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area. Model 55UR347H9UA 65UR347H9UD VESA (A x B) (mm) 300 x 300 300 x 300 Standard screw...
Mounting on a Table • When transporting the TV by hand, hold the TV as shown in the following illustration. (Depending upon model) 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.
Using the Kensington Security (TYPE A) System (optional) (Depending upon model) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http:// www.kensington.com.
Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall (Depending upon model)
Connections • Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. (Depending upon You can connect various external devices to the TV. model) For more information on external device’s connection, • For more information of screws and wall refer to the manual provided with each device.
Other connections External Devices Supported external devices are: Blu-ray player, HD Connect your TV to external devices. For the best receivers, DVD players, VCRs, audio systems, USB picture and audio quality, connect the external device storage devices, PC, gaming devices, and other and the TV with the HDMI cable.
Page 26
External Speakers Method of volume control port (Depending upon model) (Depending upon model) • Cable Spec. Each up/down pins are connected to CPU with pull up resistor EXTERNAL respectively.. SPEAKER OUT SPEAKER OUT LINE OUT GND / UP / DOWN CPU detects transition from 3.3 V to GND AUDIO...
Using the Button Network setup (Depending upon model) You can simply operate the TV functions, using the button. Wired network connection This TV can be connected to a Pro:Centric server via the port. After making the physical connection, the TV needs to be set up for network communication.
Adjusting the Angle of the TV to suit view (Depending upon model) Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20˚ 20˚ • When adjusting the angle of the product, watch out for your fingers.
Page 29
(Power) Turns the TV on or off. Selects menus or options and confirms your input. Accesses the Smart menu. (Back) Returns to the previous screen. Selects the remote’s operating mode: TV. Accesses the quick settings. Selects the remote’s operating mode: DVD. Clears all on-screen displays and returns to TV Changes the input source.
- Check if the auto-off function is activated on the performance. The customer is responsible to ensure settings related time. the compatibility of their equipment with any LG - If there is no signal while the TV is on, the TV Electronics software. If needed, please consult with...
Settings • Generated Sound - Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to Selecting Picture Mode temperature and humidity. This noise is common for products where thermal deformation is required.
Adjusting the Brightness of a Picture To use Energy Saving Feature [Picture] [Advanced [Support] [Energy Settings] [Brightness] Saving] Adjust the brightness of the entire screen. Reduces power consumption by adjusting peak screen brightness. • [Panel Brightness] Controls the level of screen •...
Specifications Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.). Broadcasting Specifications Television system ATSC, NTSC-M, 64 &...
HDMI (PC) supported mode HDMI (DTV) supported mode • Use HDMI IN 1 for PC mode. Horizontal Vertical (Depending upon model) Resolution Frequency (kHz) Frequency (Hz) Horizontal Vertical 31.46 59.94 Resolution 640 x 480p Frequency (kHz) Frequency (Hz) 31.5 640 x 350 31.46 70.09 31.46...
Supported Photo Formats Supported Video Formats File File Format Resolution Codec Format Format Minimum: 64 (W) x 64 (H) VC-1 Advanced Profile (except Video for WMVA), VC-1 Simple and Maximum: .jpeg .asf Main Profiles - Normal Type: .jpg JPEG .wmv 15360 (W) x 8640 (H) WMA Standard (except for .jpe Audio - Progressive Type:...
Cautions for Video Playback • ULTRA HD Video: 3840 x 2160, 4096 x 2160 • Some HEVC encoded ULTRA HD videos other than the content officially provided by LG Electronics may not be played. • Some codecs can be supported after a software upgrade.
KEY CODES * This feature is not available for all models. Code Code Function Function (Hexa) (Hexa) (Green) (Red) (Yellow) (Blue) (Power) 10 - 19 Number Key 0 - 9, (Space) (Back) (Dash) • Key code 4C (0 x 4C) is available on ATSC/ISDB models which use major/minor channel. (For South Korea, Japan, North America, Latin America except Colombia models)
EXTERNAL CONTROL DEVICE Phone jack Type SETUP (Depending on model) (PC) • You need to purchase the phone-jack to RS-232C cable required for the connection between the PC and the TV, which is specified in the manual. RS-232C Setup * For other models, connect to the USB port. * The connection interface may differ from your TV.
RS-232C Configurations Communication Parameters • Baud rate: 9,600 bps (UART) 7-Wire Configurations • Data length: 8 bits (Standard RS-232C cable) • Parity: None • Stop bit: 1 bit • Communication code: ASCII code • Use a crossed (reverse) cable. Set ID For Set ID number, see “Real data mapping”.
Command reference list * (Depending upon model) COMMAND1 COMMAND2 DATA (Hexadecimal) 1 Power 00 to 01 2 [Aspect Ratio] (page 30) 3 Screen Mute (page 30) 4 Volume Mute 00 to 01 5 Volume Control 00 to 64 6 [Contrast] 00 to 64 7 [Brightness] 00 to 64...
TRANSMISSION / RECEIVING PROTOCOL * (Depending upon Model) Transmission (Command1)(Command2)( )([Set ID])( )([Data])(Cr) (Command 1): First command to control the TV. (j, k, m or x) (Command 2): Second command to control the TV. ([Set ID]): You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99.
Page 42
1 Power (Command: k a) 3 Screen Mute (Command: k d) ► To control power On/Off of the set. ► To select screen mute on/off. Transmission Transmission (k)(a)( )([Set ID])( )([Data])(Cr) (k)(d)( )([Set ID])( )([Data])(Cr) [Data] 00: [Off] [Data] 00: Screen mute off (Picture on) / Video mute [Data] 01: [On] [Data] 01: Screen mute on (Picture off) [Data] 10: Video mute on...
Page 43
6 [Contrast] (Command: k g) 10 [Sharpness] (Command: k k) ► To adjust screen contrast. You can also adjust ► To adjust the screen sharpness. You can also adjust contrast in the picture settings. sharpness in the picture settings. Transmission Transmission (k)(g)( )([Set ID])( )([Data])(Cr) (k)(k)( )([Set ID])( )([Data])(Cr)
Page 44
13 [Balance] (Command: k t) 16 Auto Configuration (Command: j u) (Only RGB support model) ► To adjust balance. You can also adjust balance in ► To adjust picture position and minimize image the audio settings. shaking automatically. It works only in RGB (PC) Transmission mode.
Page 45
18 Tune Command (Command: m a) 19 Program [Skip]/[Add] (Command: m b) ► Select channel to following physical number. ► To set skip status for the current Channel. Transmission Transmission (m)(a)( )([Set ID])( )([Data] 00)( )([Data] 01)( )([Data] (m)(b)( )([Set ID])( )([Data])(Cr) 02)(Cr) [Data] 00: Skip (Data 00)(Data 01) Channel Data...
Page 46
22 Input select (Command: x b) (Main Picture Input) 23 Channel(Programme) Block/Unblock (Command: m d) ► To select input source for main picture. ► This command may work differently depending on Transmission model and signal. (x)(b)( )([Set ID])( )([Data])(Cr) [Data] Structure ►...
Page 47
24 Fail Over Mode (Command: m i) 26 Internal storage media contents play (Command: s n, a8) ► Selects the Fail Over mode. ► Plays media stored in the internal memory. Transmission ► This command may work differently depending on (m)(i)( )([Set ID])( )([Data])(Cr) model and signal.
If not use the remote-controller with data formats recommended, IR output signals will be suppressed automatically by IR receiver. In this case, LG does not guarantee IR working function. To make sure of this matter, here are two methods as below.
Dolby Laboratories Licensing Corporation. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
Regulatory FCC Radio Frequency Interference Requirements (for UNII devices) (For USA) FCC Notice High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. (For USA) These radar stations can cause interference with and/ This equipment has been tested and found to or damage this device.
Industry Canada Statement RSS-247 Requirement (For Canada) (For Canada) [For having wireless function (WLAN, Bluetooth,...)] [For product having the wireless function using 5 GHz frequency bands] This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and (1) The device for operation in the band 5150–5250 Economic Development Canada’s licence-exempt MHz is only for indoor use to reduce the potential for RSS(s).
Refers to dangerous voltage. WARNING! (STABILITY HAZARD) A television set may fall, causing serious personal LG Take-back & Recycling Policy injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: – ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
Page 55
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER TECHNOLOGY INDUSTRY CARES Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Page 56
Supplier’s Declaration of Conformity Trade Name Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632 E-mail lg.environmental@lge.com LG Customer Information Center The model and serial number of the product are located on the back and on one side of the product.