Page 3
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
InstructIons for safety and envIronment This section contains safety electric shock! instructions that will help to Never touch the plug with • give protection from risk of wet hands! Never unplug by personal injury or property pulling on the cable, always damage.
InstructIons for safety and envIronment It must be used to do the Store all detergents and • • domestic type dishes only. additives in a safe place This appliance is intended away from the reach of the • to be used in household and children.
InstructIons for safety and envIronment Compliance with WEEE collection points designated by the local authorities. Directive and Disposing of the Waste Product This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2006/95/EC, 2004/108/EC, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Installation To make the product ready for use, Do not install the product at places • make sure that the electricity, tap water where temperature may fall below supply and water drainage systems are 0ºC. appropriate before calling the Authorised Place the product on a rigid floor.
Installation drainage. The length of this connection the frequency shown in the rating label must be min. 50 cm and max. 100 cm from corresponds to your electricity supply. the floor. A discharge hose longer than 4 meters will cause washing performance We recommend that this appliance be to be affected.Attach the water discharge connected to the mains supply via a...
Installation Fitting a different plug Initial use As the colours of the wires in the mains Before starting to use the product, make lead of this appliance may not correspond sure that all preparations are made in with the coloured markings identifying the accordance with the instructions in terminals on your plug, proceed as follows: sections “Important safety instructions”...
Preparation Tips for energy saving operates with the same performance continuously. Dishwasher salt is used for Following information will help you use the this purpose. product in an ecological and energy-efficient Use only special softening salts manner. produced particularly for the Wipe away any coarse food remnants on dishwashers in your machine.
Preparation 2. Turn the salt reservoir lid counter 4. Replace the lid and tighten it securely clockwise to open it (A, B). when the reservoir is full. 5. If you will not start a washing programme Salt reservoir will fill with water immediately after adding the salt, run the when you start the product.
Page 15
Preparation Test Strip 1 second Level 1 No Lime Level 2 Very low lime content Level 3 Low lime content Level 4 Medium lime content 1 minute Level 5 High lime content Very High lime content Level 6 Remove the Let the water Take the test strip Hold for...
Preparation If you move your house, it Contact the detergent producer is very important to make if the dishes are wet and/or the water hardness level if you notice limescale spots adjustment of your machine particularly on glasses after the according to the new location washing programme is over.
Preparation Inside the detergent dispenser, Excessive usage of powder there are level markings that detergents will cause the help you use appropriate detergent not dissolve amount of detergent. When completely and will also cause brimful, detergent dispenser scratches on the glassware. will contain 40 cm³...
Preparation Open the lid of the rinse aid reservoir 2in1: Contains detergent, rinse aid or water by pressing its latch (B). softening salt 3in1: Contains detergent, rinse aid and water softening salt 4in1: Contains glass protectors in addition to detergent, rinse aid and water softening salt 5in1: Contains glass and stainless steel protectors in addition to detergent, rinse aid and water softening salt...
Preparation items after washing, level must be Place thin, narrow pieces in the middle • increased and if there is a blue trace sections of baskets if possible. after wiping them by hand, it must be There are two separate baskets in •...
Page 20
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware Dishwasher / User’s Manual 19 / 40 EN...
Preparation Upper cutlery basket The upper cutlery basket is designed for small dishes, or long items that cannot fit into the lower cutlery basket. After taking out the basket by lifting it up, remove the carrier part from the rails by pulling it towards yourself (C).
Preparation Cutlery basket Repeat the same process to raise the other side of the basket. Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an efficient manner. Since the cutlery basket can be moved (A, B), you can create more space while placing your dishes in the lower basket and free up space for your dishes of different sizes.
Preparation Collapsable lower basket Collapsable upper basket tines tines The six piece foldable tines (A) located Upper basket of the machine is equipped at the lower basket of the machine are with tines with gradual folding system (A) designed for an easier placement of large that you can lay down when you need a pieces such as pans, bowls, etc.
Preparation Tray Wash Supports Use the supports to wash trays in the bottom basket. See the Auxiliary functions section for appropriate programme and function selection. Dishwasher / User’s Manual 23 / 40 EN...
Operating the product Display Half Load Function Fast+ Function 2. On/Off key 3. Start/Pause/Cancel key SteamGloss function 4. Time Delay key TrayWash Function 5. Function keys 6. Program Selection keys 7. Programme indicator 12. End of Programme indicator 8. Salt ( ) indicator 13.
Operating the product Keys 5. Check if the Salt and Rinse Aid indicators light and add salt and/or On / Off key rinse aid if needed. It is used to turn on or off the machine. 6. Close the door of the dishwasher. Press On / Off Key to switch ON.
Page 27
Operating the product /40 EN Dishwasher / User’s Manual...
Operating the product Auxiliary functions Half Load function It is used to operate the machine without Washing programmes of your dishwasher loading it completely. are designed to obtain the best cleaning It is used to operate the machine without effect, considering the type of the soil, loading it completely.
Operating the product Automatic Detergent Detection ON - [P1] 2. Once you press the Time Delay key, Display Information Line will show Automatic Detergent Detection OFF - [P2] "0:30" and Time Delay indicator will 3. Automatic Detergent Detection start flashing. Feature is turned ON and OFF with the 3.
Operating the product The machine will remain silent Time Delay function can not be in pause mode for some time set after the programme starts. in order to remove the water in the machine and on the dishes Starting the programme completely and to have the water softener cleaned, and To start your machine after selecting the...
Operating the product 2. "3", "2", "1" is displayed on Display Press the On/Off button to turn off your Information Line and key lock is machine. cancelled. 2. Close the tap. 3. Unplug the machine from the socket. Cancelling the programme For energy saving, the product Press Start/Pause/Cancel key for 3 is automatically turned off...
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in order cleaned at regular intervals. for the machine operates efficiently. Check if food residues are left on the filters.
Maintenance and cleaning Cleaning the impellers 4. Clean all three filters under tap water by means of a brush. Clean the impellers at least once a week in 5. Replace the metal/plastic filter. order for the machine operates efficiently. 6. Place the coarse filter into the Lower impeller microfilter.
Maintenance and cleaning Top Impeller Upper impeller Check if the holes on the top impeller (1) Check if the holes on the upper impeller (1) of your machine are clogged. If they are are clogged. If they are clogged, remove clogged, remove and clean.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. • Door of the machine is open. >>> Make sure that you have closed the door of the machine. • On / Off button is not pressed. >>> Make sure that you have turned on the machine by pressing the On / Off button. Dishes are not washed clean • Dishes are not placed orderly in the machine. >>> Load the dishes as described in the user manual. • Selected programme is unsuitable. >>> Select a programme with a higher temperature and cycle time. • Impellers are stuck. >>> Prior to starting the programme, turn the lower and upper impellers by hand to make sure that they rotate freely. • Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged with food remnants such as lemon pips.
Page 36
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed. Slightly open the door and wait for evacuation of the steam inside for a while. Unload the dishes after the pieces cool down to a touchable level.
Page 37
Troubleshooting machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour. It will fade out after a couple of washes. • Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly as illustrated in section “Cleaning and Care”.
Page 38
Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing. • Opening of the detergent dispenser lid is prevented during washing. >>> Place the dishes in a way that will not prevent the detergent dispenser lid from opening and the water going into the machine from impellers.
Page 39
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid. • Corrosion has occurred on glass due to soft water. >>> Measure the hardness of the supply water appropriately and check the water hardness setting.
The cost of functional replacement • parts, but excluding consumable is recommended for all Washing items. Machines, Dishwashers and Electric The labour costs of a Beko approved Cookers • repairer to carry out the repair Gas Cookers must only be installed by •...
Page 41
If you have purchased an extended guarantee please refer to the instructions contained within the extended guarantee agreement document. Otherwise please call the appropriate number above where service can be obtained at a charge. Should you experience any difficulty in obtaining service please contact the Beko Customer Help-Line. Tel: 0845 6004911 e-mail: service@beko.co.uk...