Related Manuals for LG 27HJ710S-W.AEULMPX
Summary of Contents for LG 27HJ710S-W.AEULMPX
- Page 1 OWNER’S MANUAL MEDICAL MONITOR Please read this manual carefully before operating your set and retain it for future reference. 27HJ710S www.lg.com Copyright ⓒ 2019 LG Electronics Inc. All Rights Reserved.
-
Page 2: Table Of Contents
TABLE OF CONTENTS LICENSE ------------------------------- 3 PRODUCT SPECIFICATIONS --------- 4 ON CLEANING ------------------------ 6 ASSEMBLY AND PREPARING -------- 7 SETTINGS ---------------------------- 16 TROUBLESHOOTING ---------------- 28 PRODUCT SPECIFICATIONS -------- 30 EXTERNAL CONTROLLER SETUP -- 33... -
Page 3: License
LICENSE Each model has different licenses. Visit www.lg.com for more information on the license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. -
Page 4: Product Specifications
PRODUCT SPECIFICATIONS The product specifications are subject to change without prior notice for product improvements. “ ” refers to alternating current (AC), “ ” refers to direct current (DC). LCD Screen Type TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Screen Pixel Pitch 0.1554 mm x 0.1554 mm Resolution... - Page 5 Prevention of electric shock Class Ⅰ Classification according to the Front: IP35 degree of protection against ingress of water or particulate Except for Front: IP32 matter Medical Specifications Level of safety in places where Not suitable for use in places where flammable flammable anesthetics are mixed anesthetics are mixed with air, oxygen or nitrogen with air, oxygen or nitrogen oxides...
-
Page 6: On Cleaning
ON CLEANING Recommended Cleaning Chemicals • Isopropanol 100 % • Ethanol 70 % • Cidex ® • 0.9 % NaCl solution How to Use Cleaner • Prior to cleaning, turn off the monitor and remove the power cable. • Soak a soft cloth in a recommended cleaner, then lightly rub the screen with no more than 1 N of force. •... -
Page 7: Assembly And Preparing
It is recommend that use the supplied components. • If you use generic cables not certified by LG, the screen may not display or there may be image noises. • Need to use the authorized components about the below accessories. Unauthorized components may be cause of the damage and malfunction of the product. - Page 8 True Color Pro Optional • Required and Recommended: You can download and install the latest version from the enclosed CD or from the LGE website (www.lg.com). • Optional: You can download and install the latest version from the LGE website (www.lg.com).
- Page 9 Product and LED Control buttons...
- Page 10 LED Control button Functions Input Selects the input mode. PIP/PBP Displays the screens of two input modes on one monitor. Hotkey 1, 2 Opens the Hotkey Settings menu. Brightness Adjusts the screen brightness. Selects menus or options and confirms. Contrast Adjusts the screen contrast.
- Page 11 Connectors Potential Equalization Conductor - Connect an equipotential plug. RS-232C Connector - Connect to an external device through the RS-232C connector and control the monitor. DC-IN (19 V ) Connector - Connect the AC/DC adaptor. SDI IN / SDI OUT Connector - Receives or transmits serial digital component signals.
- Page 12 DP IN / DP OUT Connector - Receives or transmits digital video signals. - There may be no video output depending on the DP (DisplayPort) version of your PC. - A cable with DisplayPort 1.2 specifications is recommended when using a Mini DP to DP (Mini DisplayPort to DisplayPort) cable.
- Page 13 Installing the Monitor Cable connection and organize Before connecting the connectors, remove the back door as shown below. CAUTION • When the back door is attached to the monitor, the monitor meets water resistance standards. Do not use the monitor with the back door detached, as the water resistance capability is not guaranteed without the door.
- Page 14 Using screws longer than the standard length may damage the inside of the product. A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for any accidents relating to the use of non-standard screws.
- Page 15 • Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. • Applying excessive force when tightening screws may damage the monitor.
-
Page 16: Settings
SETTINGS Activate Main Menu Press the [Menu] button to activate the LED Control button. Pressing the [Menu] button while the LED Control button is activated brings up the OSD menu. Use the [ Brightness ] left/right and [ Contrast ] up/down LED Control buttons to navigate. Press the [Menu] or [ Brightness] LED Control button to exit the OSD menu. - Page 17 QUICK SETTINGS The following settings are available. Quick Settings Description Brightness Adjusts the brightness of the screen. NOTE • Brightness Stabilization to On/ You can turn the by pressing the button in the Brightness menu. • When the Brightness Stabilization is On, Brightness menus becomes disabled. •...
- Page 18 Quick Settings Description User Preset User Preset allows the user to save or load up to 10 picture quality settings for multiple connected devices in each preset. NOTE • You can use User Preset to import or save items in Picture Adjust and Color Adjust of the Picture menu.
- Page 19 INPUT The following settings are available. Input Description Main Input List Selects the input mode. Input List Aspect Ratio Adjusts the aspect ratio of the screen. (Full Wide, Original, 1:1) NOTE • The display may look the same for Full Wide, Original, and 1:1 options at the recommended resolution (3840 x 2160).
- Page 20 Input Description PBP / PIP Displays the screens of two input modes on one monitor. PIP Size Adjusts the PIP size. (Small, Medium, Large) Main/Sub Screen Toggles between the main screen and the sub screen in PBP / PIP mode. Change Failover Input Switch Main Input is changed to Failover Input when there is no signal at the Main Input.
- Page 21 PICTURE The following settings are available. Picture Description Custom Allows the user to adjust each element. The color mode of the main Picture Mode menu can be adjusted. Mono Monochrome (black and white) color mode. sRGB A standard RGB color mode for the monitor and printer. A standard TV PAL color mode for broadcasts.
- Page 22 Picture Description Picture Adjust Adjusts the brightness of the screen. NOTE • You can turn the Brightness Stabilization to On/ by pressing Brightness button in the Brightness menu. • When the Brightness Stabilization is On, Brightness menus becomes disabled. • When the Brightness Stabilization is On, SMART ENERGY SAVING and DFC menus become disabled.
- Page 23 Picture Description Picture Adjust HDMI ULTRA HD Deep Provides sharper images when connected to a device supporting Color ULTRA HD Deep Color. NOTE • If the connected device does not support ULTRA HD Deep Color, the feature may not work properly. •...
- Page 24 Picture Description Picture Adjust Uniformity Adjusts the uniformity of screen brightness. NOTE • Enabling Uniformity may reduce the overall brightness of the image. Enables the Uniformity feature. Disables the Uniformity feature. Color Adjust Gamma Custom gamma settings: Gamma 1.8, Gamma 2.0, Gamma 2.2, Gamma 2.4, Gamma 2.6, DICOM Gamma Curve.
- Page 25 GENERAL The following settings are available. General Description Language Sets the menu screen to the desired language. SMART ENERGY Conserve energy by using luminance compensation algorithm. SAVING High Saves energy using the high-efficiency SMART ENERGY SAVING feature. Saves energy using the low-efficiency SMART ENERGY SAVING feature.
- Page 26 General Description DVI Power Supply Supplies power to devices connected to the DVI input port as a dongle without power. Activates the DVI Power Supply feature. Deactivates the DVI Power Supply feature. Hot key Settings Assigns hotkeys for picture settings. Once configured, the assigned menu is activated when a hotkey is pressed.
- Page 27 General Description Auto Screen Off The screen turns off automatically when there are no monitor signals for a set period of time. Enables the Auto Screen Off feature. Disables the Auto Screen Off feature. DisplayPort 1.2 Enables or disables DisplayPort 1.2. NOTE •...
-
Page 28: Troubleshooting
TROUBLESHOOTING Nothing is displayed on the screen. • Is the monitor's power cord plugged in? Check if the power cord is correctly plugged into the power outlet. • Is the power indicator on? Check your power cable connection and turn the power switch on. •... - Page 29 • Did you install the monitor driver? Install the enclosed monitor driver provided with the monitor or go to the LG Electronics homepage (http://www.lg.com) to download and install the monitor driver. • Check your graphics card user manual to see if the Plug and Play...
-
Page 30: Product Specifications
PRODUCT SPECIFICATIONS The product specifications are subject to change without prior notice for product improvements. Preset Modes DisplayPort Horizontal Frequency Vertical Frequency Preset Modes Polarity (H/V) Remarks (kHz) (Hz) 640 x 480 31.469 59.94 800 x 600 37.879 60.317 1024 x 768 48.363 1152 x 864 54.347... - Page 31 HDMI Horizontal Frequency Vertical Frequency Preset Modes Polarity (H/V) Remarks (kHz) (Hz) 640 x 480 31.469 59.94 800 x 600 37.879 60.317 1024 x 768 48.363 1152 x 864 54.347 60.05 1280 x 720 1280 x 1024 63.981 60.02 1600 x 900 1920 x 1080 67.5 2560 x 1440...
- Page 32 Input Timing (Video) Vertical dimensions Vertical Frequency (Hz) HDMI 480i 59.94/60 480p 59.94/60 576p 576i 720p 59.94/60 720p 1080i 59.94/60 1080p 59.94/60 1080i 1080p 1080p 23.98/24 1080p 29.97/30 2160p 23.98/24 2160p 2160p 29.97/30 2160p 2160p 59.94/60 Power indicator Mode LED Color On Mode Green...
-
Page 33: External Controller Setup
EXTERNAL CONTROLLER SETUP The actual product may differ from the picture shown. Connect the RS-232C (serial connector) of the PC to the RS-232C IN connector at the back of the monitor. Purchase a cable to connect the RS-232C connectors, as the cable is not provided as an accessory. Use an RS-232C cable to remotely control the monitor (see Figure 1). - Page 34 Set ID Function This function allows you to assign a unique ID to the monitor to control it remotely from your PC. Please refer to the "Actual Data Structure". Press the [Menu] button. Use the , buttons to select General. Then press the OK button. , buttons to select Set ID.
- Page 35 Command Reference List Data Title Command1 Command2 (Hexadecimal) 01. Power 00 - 01 02. Screen Mute 00 - 01 03. Input select (Main) 00 - 03 04. Input select (Sub) 00 - 03 05. Aspect Ratio (Main) 00 - 02 06.
- Page 36 Transmission/Reception Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1]: j, k, m, x [Command 2]: This command is used to control the monitor. [Set ID]: Used to identify the monitor being controlled. [Set ID] can be assigned to each monitor under GENERAL in the Settings Menu.
- Page 37 Error Acknowledgment [Command2][ ][Set ID][ ][NG][Data][x] When the set receives an abnormal piece of Data for an unsupported function or there is a communication error, it returns ACK in the format above. Data 00 : Illegal code Actual Data Structure (Base 16 • Base 10) •...
- Page 38 01. Power (Command: k a) ▶ This controls the monitor power on/off. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Power Off 01: Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] 02. Screen Mute (Command: k d) ▶ This controls the monitor display power on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 00: Screen Mute Off 01: Screen Mute On...
- Page 39 05. Aspect Ratio (Main) (Command: k c) ▶ This adjusts the aspect ratio of the main screen. Transmission [k][c][ ][Set ID][ ][Data][Cr] Data 00: Full Wide 01: Original 02: 1:1 Ack [c][ ][Set ID][ ][OK/NG][Data][x] 06. Aspect Ratio (Sub) (Command: k o) ▶...
- Page 40 09. Main/Sub Screen Change (Command: m a) ▶ This controls the main/sub screen change in PBP mode. Transmission [m][a][ ][Set ID][ ][Data][Cr] Data 01: Main/Sub Screen exchange Ack [a][ ][Set ID][ ][OK/NG][Data][x] 10. Picture Mode (Command: d x) ▶ This controls the picture mode. Transmission [d][x][ ][Set ID][ ][Data][Cr] Data 00: Custom...
- Page 41 13. Sharpness (Command: k k) ▶ Adjusts the sharpness of the screen. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min: 00 - Max: 64 Ack [k][ ][Set ID][ ][OK/NG][Data][x] 14. Brightness Stabilization (Command: m b) ▶ This adjusts the Brightness Stabilization feature. Transmission [m][b][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On...
- Page 42 18. DFC (Command: m f) ▶ This controls the DFC feature. Transmission [m][f][ ][Set ID][ ][Data][Cr] Data 00: On 01: Off Ack [f][ ][Set ID][ ][OK/NG][Data][x] 19. Response Time (Command: m g) ▶ This controls the response time. Transmission [m][g][ ][Set ID][ ][Data][Cr] Data 00: Fast 01: Normal 02: Slow...
- Page 43 23. Color Temp (Command: k u) ▶ This adjusts the screen color temperature. Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 00: Custom 01: 6500K 02: 8500K 03: 9300K 04: Manual Ack [u][ ][Set ID][ ][OK/NG][Data][x] 24. Red Gain (Command: j w) ▶...
- Page 44 28. SMART ENERGY SAVING (Command: m k) ▶ This adjusts the SMART ENERGY SAVING feature. Transmission [m][k][ ][Set ID][ ][Data][Cr] Data 00: High 01: Low 02: Off Ack [k][ ][Set ID][ ][OK/NG][Data][x] 29. LED Control Button (Command: m l) ▶ Adjusts how long the control button LEDs remain lit. Transmission [m][l][ ][Set ID][ ][Data][Cr] Data 00: Always On 01: 20sec time out...
- Page 45 33. OSD Lock (Command: k m) ▶ This controls the OSD Lock feature. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Ack [m][ ][Set ID][ ][OK/NG][Data][x] 34. Reset (Command: f k) ▶ This controls the reset operation. Transmission [f][k][ ][Set ID][ ][Data][Cr] Data 00: Picture Reset 01: Factory Reset 02: User Preset Reset...
- Page 46 35. Failover Input Switch (Command: k z) ▶ Controls the Failover Input Switch function. Transmission [k][z][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Ack [z][ ][Set ID][ ][OK/NG][Data][x] 36. Main Input (Command: k v) ▶ Controls the input of the Failover Main. Transmission [k][v][ ][Set ID][ ][Data][Cr] Data 00: SDI...
- Page 47 In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.