Related Manuals for Brother QL700RF1
Summary of Contents for Brother QL700RF1
- Page 1 User's Guide QL-700 Be sure to read and understand this guide before using the machine. We recommend that you keep this guide nearby for future reference. www.brother.com ver.B...
- Page 2 Thank you for purchasing the Brother QL-700. We strongly recommend that you read this guide carefully before using the Brother QL-700, and then keep it nearby for future reference. We provide service & support for users who register their products on our website.
-
Page 3: Table Of Contents
Introduction Contents Introduction •••••••••••••••••••••••••••••••••••••••••••••••••••• 1 Contents ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 1 Maintenance •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 2 Troubleshooting •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 Main Specifications•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 6... -
Page 4: Maintenance
Roller maintenance To clean the roller, please use the optional cleaning sheet. When performing maintenance on the roller, be sure to only use Brother cleaning sheets. If you use non-Brother cleaning sheets, the surface of the roller may become scratched, or a malfunction may result. - Page 5 Check that the printing surface of the cleaning sheet is facing upwards. Close the DK Roll compartment cover and press the ON/OFF button ( ) to turn the Brother QL-700 on. Press the Feed button for more Feed button than one second.
-
Page 6: Troubleshooting
Check that the DK Roll compartment cover is closed. • Has a print error or transmission error occurred? Turn off the Brother QL printer and then turn it on again. If there is still a problem, contact your Brother dealer. - Page 7 Problem Solution • If a cutter error occurs, keep the DK roll compartment cover closed and press the ON/OFF button. The cutter moves back to Cutter error the normal position and turns the machine OFF automatically. After the machine is OFF, inspect the label outlet and remove the paper jam.
-
Page 8: Main Specifications
Reference 3 Main Specifications Product specifications Items Specifications Display Editor Lite lamp (green), STATUS lamp (green, orange, red) Printing Direct thermal printing via thermal head method Speed of Max. 150 mm/sec, Max. 93 labels/min. (Standard Address Labels) printing (When connected to the PC and using P-touch Editor) Print head 300 dpi/720 dot Print...