Page 2
Sony Electronics Inc. (“Sony”) grants User a license to Use one (1987) or limited rights in technical data in accordance with FAR copy of the software which is provided to you as part of this Sony 52.227-14 (1987). User has only those rights provided for such product (“Software”).
Page 3
All rights reserved. Reproduction in whole or in part without easily accessible. written permission is prohibited. Sony, Digital Home Receiver, and the Sony logo are trademarks of Sony. CABLEVISION and the Safety ❑ CABLEVISION logo are registered trademarks of CABLEVISION Operate the unit only on AC 60 Hz 110-120 V.
Page 4
Refer to them bed, sofa, rug or other similar surface. ❑ whenever you call upon your Sony dealer regarding this product. Never place the set in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.
Contents IIntroducing the Digital Connecting the Digital Home Receiver Home Receiver Unpacking............1 Overview ............9 Supplied Items .............1 TV with RF Connector Only......... 9 Items Supplied Separately by Cablevision....1 TV and VCR with RF Connectors Only....10 Front Panel ............2 Front Panel Controls and Indicators.....2 Other Information Rear Panel............
Introducing the Digital Home Receiver Unpacking Supplied Items The following items are supplied: Digital Home Receiver (DHG-B45CV) AC Power Cord Hardware Setup Instructions Items Supplied The following items are supplied separately by Cablevision: Separately by ❑ Remote control Cablevision ❑ Access card ❑...
Introducing the Digital Home Receiver Front Panel MENU Front Panel Controls and Indicators Control or Indicator Description Home Receiver STANDBY 1 Switches the Digital between active and standby modes. Front Panel Display Provides channel number and current time. Arrows (G g F f) Moves the highlight within menus and guides.
Rear Panel Rear Panel Connection Description 1 CABLE IN Connects to Cablevision cable network signals using an RF coaxial cable. 2 TO TV/VCR Outputs audio (variable) and video signals to the VHF/UHF (or RF) input on your TV or VCR using an RF coaxial cable. 3 ACCESS CARD Slot The slot in which the Access Card is inserted.
Using the Remote Control (RM-Y806) ✍ The following describes the Sony RM-Y806 remote control. If Cablevision supplied you with a different remote control, see the manual that came with that remote for details. Buttons that are highlighted below can also be used to operate your TV and VCR after you’ve programmed the remote control.
For details, see “Programming the Remote Control” on page 5. Programming the The remote control is preset at the factory to operate any Sony brand Remote Control TV and VCR. If you have any other brand of TV or VCR, use the following procedures to program the remote to use the highlighted buttons shown on pages 4 and 5.
Introducing the Digital Home Receiver If the component does NOT respond Try programming the remote using the other codes listed for your brand. If you still cannot get your component to respond after trying all the codes, your component may not be compatible with this remote.
Remote Control Programmable Codes Remote Control Programmable Codes TV Codes VCR Codes Manufacturer Code Manufacturer Code Sony Sony VHS Akai Sony 8mm Bell & Howell Sony Beta Centurion Bell & How Coronad Daewoo Daewoo 135, 136 Emerson 316, 317, 318, 319, 320...
Connecting the Digital Home Receiver Overview This chapter includes illustrated instructions for setting up your Digital Home Receiver: To Connect See Page TV with RF Connector Only TV and VCR with RF Connectors Only TV with RF Connector Only Connect the coaxial cable from the wall outlet (Cablevision cable network signal) to the Digital Home Receiver’s jack.
Connecting the Digital Home Receiver TV and VCR with RF Connectors Only Connect the coaxial cable from the wall outlet (Cablevision cable network signal) to the Digital Home Receiver’s jack. CABLE IN Connect the Digital Home Receiver’s jack to the VCR’s TO TV/VCR ) jack.
Make sure you press the FUNCTION button (TV, VCR, CABLE) of the device you want to control (see page 4). ❏ If you are trying to control a TV or VCR that is not a Sony brand, you must first program the remote to operate these devices (see page 5). ❏...
Other Information Changing the Digital If you connected the Digital Home Receiver to your TV or VCR using Home Receiver’s RF an RF connection (as described on pages 9 and 10), you need to set the RF output channel of the Digital Home Receiver to match the RF Output Channel channel (channel 3 or 4) of the cable service provided in your area.
Approx. 355 × 65 × 309 mm (w/h/d) (Approx. 14 × 2- × 12- inches) 9/16 3/16 including projecting parts and controls Mass Approx. 3.0 kg (6.5 lbs) Accessories Supplied AC power cord (1) Optional Sony Branded Digital Home Receiver Accessories Remote Commander, RM-Y806 (includes AA batteries)
Other Information Index # (ENTER), 0 – 9, INPUT, AC IN connector LAST CH, AC OUT connector ACCESS CARD slot arrows, MENU, on front panel MENU, MUTE, BACK, batteries in remote control 6 inserting in remote 6 PAUSE, CABLE FUNCTION, PLAY, CABLE IN connector problems, correcting...
Page 21
Other Information TV FUNCTION, TV POWER TV POWER, TV with RF connector VCR FUNCTION, VCR POWER, VCR with RF connector VIEWER, VOL +/-, volume adjusting 2 volume, adjusting,...