VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION....................2 2. SAFETY INSTRUCTIONS....................4 3. INSTALLATION.......................6 4. PRODUCT DESCRIPTION..................... 7 5. DAILY USE........................9 6. HINTS AND TIPS......................13 7.
Page 3
Keep all packaging away from children and dispose of it • appropriately. WARNING: Keep children and pets away from the • appliance when it operates or when it cools down. Accessible parts become hot during use. If the appliance has a child safety device, it should be •...
If the glass ceramic surface / glass surface is cracked, • switch off the appliance and unplug it from the mains. In case the appliance is connected to the mains directly using junction box, remove the fuse to disconnect the appliance from power supply.
Page 5
• Make sure the appliance is installed • Do not change the specification of this correctly. Loose and incorrect electricity appliance. mains cable or plug (if applicable) can • Make sure that the ventilation openings make the terminal become too hot. are not blocked.
• Do not put aluminium foil on the • Concerning the lamp(s) inside this product appliance. and spare part lamps sold separately: • Cookware made of cast iron, aluminium or These lamps are intended to withstand with a damaged bottom can cause extreme physical conditions in household scratches on the glass / glass ceramic.
min. min. 500mm 50mm If the appliance is installed above a drawer, the hob ventilation can warm up the items stored in the drawer during the cooking process. 4. PRODUCT DESCRIPTION 4.1 Cooking surface layout Induction cooking zone Control panel ENGLISH...
Page 8
4.2 Control panel layout Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor Function Comment field ON / OFF To activate and deactivate the hob. Lock / Child Safety Device To lock / unlock the control panel. Pause To activate and deactivate the function.
Display Description PowerBoost operates. There is a malfunction. + digit OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / resid‐ ual heat. Lock / Child Safety Device operates. Incorrect or too small cookware or no cookware on the cooking zone. Automatic Switch Off operates.
Page 10
5.6 PowerBoost Heat setting The hob deactivates This function makes more power available to after the induction cooking zones. The function can be activated for the induction cooking 6 hours , 1 - 2 zone only for a limited period of time. After this time the induction cooking zone 3 - 4 5 hours...
Page 11
You can use this function when the hob is for 4 seconds. comes on. Deactivate activated and the cooking zones do not the hob with operate. The heat setting display shows To deactivate the function: activate the hob To activate the function: touch and then with .
Page 12
Automat‐ Boiling 1) Frying 2) ic light Mode H4 Fan speed Fan speed Mode H5 Fan speed Fan speed Mode H6 Fan speed Fan speed 1) The hob detects the boiling process and acti‐ vates fan speed in accordance with automatic mode.
hood fan. To start the fan again with fan The light on the hood speed 1 touch deactivates 2 minutes after deactivating the hob. To activate automatic operation of the function, deactivate the hob and activate it again. Activating the light You can set the hob to activate the light automatically whenever you activate the hob.
Page 14
cooking zone with the medium heat setting The data in the table is for uses less than a half of its power. guidance only. Heat setting Use to: Time Hints (min) Keep cooked food warm. as neces‐ Put a lid on the cookware. sary 1 - 2 Hollandaise sauce, melt: butter, choco‐...
Cooker hoods with the Hob²Hood function Other remotely controlled To find the full range of cooker hoods which appliances may block the signal. work with this function refer to our consumer Do not use any such appliances website. near to the hob while Hob²Hood is on.
Page 16
Problem Possible cause Remedy There is water or fat stains on the Clean the control panel. control panel. An acoustic signal sounds and You put something on one or more Remove the object from the sensor the hob deactivates. sensor fields. fields.
Diameter of circular cooking zones (Ø) Left front 21.0 cm Left rear 21.0 cm Right front 21.0 cm Right rear 21.0 cm Energy consumption per cooking zone (EC electric Left front 179.6 Wh / kg cooking) Left rear 189.1 Wh / kg Right front 187.3 Wh / kg Right rear...