hit counter script

Overedge Stitching - Brother JK2700NT Operation Manual

Table of Contents

Advertisement

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Sew with the center of the presser foot
4
aligned along the center of the two pieces
of fabric.
After sewing is finished, remove the paper
5
and the basting stitches.

Overedge stitching

Stitch Name
Elastic Shell
Tuck Stitch
Elastic Overlock
Stitch
Comb Stitch
These stitches are used to join together seams and finish
them in one operation. Elastic Overlock Stitch: for
sewing stretch materials.
Pattern
Stitch
Length
37 27
[mm (inch)]
[mm (inch)]
12
F-3
(1/64-1/8)
22
17
(1/8-1/4)
23
18
Fixed
2.5 (3/32)
25
20
Put the fabric under the presser foot so
1
that the seamline (or arrowhead point) is
approximately 3 mm (1/8 inch) to the left
of the center of the presser foot.
• If the seam allowance is wider than the stitch
pattern, trim away any excess fabric after
stitching.
Stitch
Width
Memo
● When sewing the Elastic Overlock Stitch,
position the fabric so that its edge is on the
left of the needle.
3-6.5
3
34

Advertisement

Table of Contents
loading

Table of Contents