Related Manuals for Sealey TIG160HF
Summary of Contents for Sealey TIG160HF
- Page 1 INSTRUCTIONS FOR: TIG/MMA HF INVERTER WELDER 160Amp 230V TIG160HF MODEL No: Original Language Version TIG160HF Issue: 1 - 31/10/11...
-
Page 2: Safety Instructions
160Amp 230V MODEL No: TIG160HF Thank you for purchasing a Sealey Welder. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: BEFORE USING THIS PRODUCT, PLEASE READ THE INSTRUCTIONS CAREFULLY. MAKE CAREFUL NOTE OF SAFETY INSTRUCTIONS, WARNINGS AND CAUTIONS. - Page 3 (instantaneous short circuits) and supervises the safety system fig 1 Panel for setting parameters and operating modes. HF striking generator. Protective gas electrovalve. Remote regulation. Original Language Version TIG160HF Issue: 1 - 31/10/11...
- Page 4 (3) and tighten the large grub screw until the cable is firmly held. Now slide the outer plug cover up the cable and press the brass body into it as shown in fig.4. Fig 5 Fig 4 Original Language Version TIG160HF Issue: 1 - 31/10/11...
-
Page 5: Electromagnetic Compatibility
This shielding should be connected to the welding power source so that good electrical contact is maintained between the conduit and the welding power source enclosure. Original Language Version TIG160HF Issue: 1 - 31/10/11... - Page 6 ARC WELDING PROCEDURE The TIG160HF will also perform ordinary ARC welding (without gas) using coated electrodes.(Requires optional ARC Accessory Kit INV/16) Please note that the way the welding cables are connected to the inverter for ordinary Arc welding may be different to the way the cables are connected for standard TIG welding.
-
Page 7: Maintenance
9.1.4 In the event of any problems of unsatisfactory weld performance please first go through the trouble shooting procedure shown below. If this does not solve the problem the Inverter must be taken to a qualified and authorised service agent for repair. Contact your local Sealey dealer for service.