Install Ncs 1004 On An Eia/Ansi/ Etsi Rack - Cisco NCS 1004 Manual
Hide thumbs
Also See for NCS 1004:
- Command reference manual (110 pages) ,
- Hardware installation manual (70 pages) ,
- Manual (52 pages)
Advertisement
Install Cisco NCS 1004
Figure 4: Rack Specification
Rack Type
19" racks
23" racks
ETSI racks
Note
The distance between the front and the rear post in a four post rack is 427 mm (closed position) and 707 mm
(open position).
Install NCS 1004 on an EIA/ANSI/ ETSI Rack
It is mandatory to fix the fiber management brackets for all the cards in the chassis before installing the Cisco
NCS 1004 chassis onto the rack. See
Rack Front Opening X
Rack Mounting Hole
Center-Center Y
450.8mm (17.75")
465mm (18.312")
552.45mm (21.75")
566.7mm (22.312")
500.0mm(19.68")
515.0mm(20.276")
Attach Fiber Management Bracket
Install NCS 1004 on an EIA/ANSI/ ETSI Rack
Mounting Flange
Dimension Z
482.6mm (19")
584.2mm (23")
533.4mm(21")
section for the detailed procedure.
Install Cisco NCS 1004
3
Advertisement
