Page 1
ORDER NO. SD0509U43C1 Wet/Dry Rechargeable Shaver ES7035-U1 / ES7037-U1 SPECIFICATIONS SPECIFICATIONS 2005 Matsushita Electric Works, Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law. PDF created with pdfFactory Pro trial version www.pdffactory.com...
1. SCHEMATIC DIAGRAM 1.1. ES7035 1.2. ES7037 2. WIRING CONNECTION DIAGRAM 3. DISASSEMBLY INSTRUCTION Follow the procedure below to disassemble the main unit. 1. Remove the cap, the outer foil with foil frame and the inner blade. PDF created with pdfFactory Pro trial version www.pdffactory.com...
Page 3
2. Slide the trimmer handle up to open the trimmer and unhook the trimmer handle by inserting something like a sloted screwdriver or plastic spatula into a slit. NOTE: Make sure not to scratch or damage on the housing. 3. Remove trimmer and trimmer handle. PDF created with pdfFactory Pro trial version www.pdffactory.com...
Page 4
4. To remove the trimmer driving bar or the slit blade driving bar, press bars outward. 5. Loosen a screw and remove the bottom cover. 6. Slide down the side panels for both sides. PDF created with pdfFactory Pro trial version www.pdffactory.com...
Page 5
7. Loosen two screws on front and four screws on the back side, and remove two housing clips. 8. Take out the housing B. PDF created with pdfFactory Pro trial version www.pdffactory.com...
9. Remove the motor assembly and tube holder. 10. And take out the battery assembly from housing A. 11. Remove the battery o-ring and washer in each battery. Take out the rechargeable batteries from the chassis. 4. CAUTION IN ASSEMBLY PDF created with pdfFactory Pro trial version www.pdffactory.com...
NOTE: When reassembling, replace the new waterproof rubber. Make sure whether there is NO foreign substance sticking around a part covered with water seal. 4.1. Motor Insert the motor and press fit the waterproof tube neatly under the tube holder. And put the float spring propery.
Page 8
4.3. Module Align the projection of switch select button on housing A with the groove of switch plate on module. 4.4. Driving bars Set the trimmer driving bar and the slit blade driving bar. PDF created with pdfFactory Pro trial version www.pdffactory.com...
4.5. Side panel Set the side panel on the body and slide it up until clicking the hook of panel at three locations. NOTE: Make sure that the left and right side panels are firmly fitted on both rear and front side. Fit the front side of hook first, then on top and rear side.
5. TROUBLESHOOTING GUIDE (Refer to WIRING CONNECTION DIAGRAM) <TROUBLE> <CHECK.> <REMEDY> Motor does not <CHECK CHARGING ADAPTOR.> NO Replace charging rotate. Does not Connect the rated voltage to the normal main unit by the adaptor. charge. charging adaptor. Functions for a Check if the charge status lamp of main unit is lit.
Page 11
(Replace two rechargeable batteries at the same time even though one battery is defective due to series connection.) <CHECK SWITCH CONTACT.> NO Repair contact replace Okay if there is a continuity and no deformation of switch housing A. terminals. <CHECK MOTOR.> NO Replace motor.
6. EXPLODED VIEW & REPLACEMENT PARTS LIST 6.1. ES7035 NOTE: *A=available as an optional accessory *B=only available as set *C=available individually PDF created with pdfFactory Pro trial version www.pdffactory.com...
Page 13
Ref. No. Part No. Part Name & Description Remarks Per Unit WES8044X7158 PROTECTIVE CAP (BG) WES9085PC OUTER FOIL for USA WES9085C OUTER FOIL for CANADA WES7046S0047 OUTER FOIL FRAME (BG) WES9064PC INNER BLADE for USA WES9064C INNER BLADE for CANADA WES7046L1009 LINEAR MOTOR ASSEMBLY (BG)
Page 14
NOTE: *A=available as an optional accessory *B=only available as set *C=available individually Ref. No. Part No. Part Name & Description Remarks Per Unit WES8044X7158 PROTECTIVE CAP (BG) WES9085PC OUTER FOIL WES7046S0047 OUTER FOIL FRAME (BG) WES9064PC INNER BLADE WES7046L1009 LINEAR MOTOR ASSEMBLY (BG) WES7046L1087 TRIMMER DRIVING BAR (BG)
Page 15
Ref. No. Part No. Part Name & Description Remarks Per Unit WES7037S3038 BODY BLOCK (BG) WES7035K7658 CHARGING ADAPTOR A-2 PLUG (BG) WES4025K7007 SOFT CASE (BG) WES7037S8008 INDIVIDUAL BOX (BG) WES7035S8108 OPERATING INSTRUCTIONS (BG) PDF created with pdfFactory Pro trial version www.pdffactory.com...