Related Manuals for Fujitsu PR-LN4
Summary of Contents for Fujitsu PR-LN4
- Page 1 PR-LN4 Software Guide Fujitsu Dot Matrix Printer DL7600Pro / DL7400Pro Rev.03: Jun 11, 2019...
-
Page 2: Abbreviations Used In This Manual
Windows® 7 Home Premium Windows® 7 Starter Microsoft® Windows Server® 2008 Enterprise x64 Edition referred to as Server 2008 Microsoft® Windows Server® 2008 Enterprise Microsoft® Windows Server® 2008 Standard x64 Edition Microsoft® Windows Server® 2008 Standard PR-LN4 Software Guide 2 / 34... -
Page 3: About The Trademark
Windows® Vista Home Premium Windows® Vista Home Basic x64 Edition Windows® Vista Home Basic ABOUT THE TRADEMARK Company names and product names given in this document are registered trademarks or trademarks of their respective companies. PR-LN4 Software Guide 3 / 34... -
Page 4: Table Of Contents
CHAPTER 5 CONFIGURING USING A WEB BROWSER ..........24 5.1 DISPLAYING THE PR-LN4 WEB PAGE .......... 24 5.2 CONFIGURATION SETTINGS FROM THE PR-LN4 WEB PAGE ... 25 5.3 PR-LN4 WEB PAGE MENU STRUCTURE ........25 5.4 PRINT SERVER FUNCTIONS ............26 CHAPTER 6 TROUBLESHOOTING .................. -
Page 5: Chapter 1 Introduction
CHAPTER 1 INTRODUCTION 1.1 OVERVIEW This manual describes how to configure and how to use the PR-LN4 used by the printer. Read this manual thoroughly to ensure you use the product correctly and safely. When using a Windows printer driver via the LAN, you need to configure the LAN information and create an original TCP/IP ports for this printer. -
Page 6: Description Of Equipment
(*1) SW 1 DHCP Enabled DHCP Disabled SW 2 Initialize the LAN card settings. SW 3 Print the list of present setting value. SW 4 (Reserve) *1) When DHCP disabled, IP Address is 192.168.192.168. PR-LN4 Software Guide 6 / 34... -
Page 7: Connectiong To A Network
1.4.2 CONNECTIONG TO A NETWORK In order to connect the PR-LN4 to a network, prepare the following items. Ethernet Hub Network Cable *1) If you are using the printer in a 100BASE-TX network, prepare an Ethernet hub and network cable (category 5 or higher) that support 100BASE. -
Page 8: How To Use This Manual
1.5 HOW TO USE THIS MANUAL The FUJITSU DL7400Pro printer is used as an example for the explanations in this document. Since the operating procedures (explanations) may vary depending on the Operating System, read these expressions as the Operating System you are using by referring to the following. -
Page 9: Chapter 2 Using The Pr-Ln4 In A Windows Environment
CHAPTER 2 USING THE PR-LN4 IN A WINDOWS ENVIRONMENT This section describes how to connect to the PR-LN4 and print using TCP/IP in a Windows environment. The procedure for printing using the PR-LN4 over the TCP/IP protocol is as follows. -
Page 10: Check That The Internet Protocol
(3) Check that the [Internet Protocol Version 4 (TCP/IPv4)] has been added. Click [Properties]. *1) If [Internet Protocol Version 4 (TCP/IPv4)] is not in the list, click [Install] and select [Select Network Component Type] - [Protocol] - [Internet Protocol Version 4 (TCP/IPv4)] to add it. PR-LN4 Software Guide 10 / 34... - Page 11 (4) In [General], check that the settings have been configured to match your network environment. PR-LN4 Software Guide 11 / 34...
-
Page 12: Chapter 3 Configuration Using The Lan Setting Tool
If the Auto Play window is not displayed, use Explorer or another application to open CD-ROM. And double click the DLSELECT.EXE file. *1) For Windows 8 / Server 2012 and later: Click the Toast Notification, and click [Run DLSELECT.EXE] PR-LN4 Software Guide 12 / 34... - Page 13 3. The FUJITSU DL Series Software Setup window is displayed. From the printer driver list, select PR-LN4(LAN) Installer and click the [OK] button. *1) If the menu screen does not appear, run "DLSELECT.EXE " on this CD. 4. The Printer LAN Settings Tool window is displayed.
- Page 14 6. A screen appears indicating that the installation is in progress. Please wait for the installation to complete. 7. This window is displayed after the "LAN Settings Tool" installation completes. Follow the on-screen instructions and click [Finish]. PR-LN4 Software Guide 14 / 34...
-
Page 15: Operating Procedure
*2) In the case of Windows 8, software can be started from the start screen. 2. The main screen of the tool is displayed. *1) Refer to "3.2.2 PR-LN4 SETTINGS" and "3.2.3 ADDING AN ORIGINAL TCP/IP PORT " for details on how to perform each of the operations. -
Page 16: Pr-Ln4 Settings
3.2.2 PR-LN4 SETTINGS This section describes how to configure the simple IP address in the PR-LN4 by using this tool. 1. Configure the PR-LN4 settings. Click [Next]. *1) If you are only adding an Original TCP/IP port, select the [Add Original TCP/IP port only] check box and then click [Next]. - Page 17 After configuring the settings, click [Next]. To set the IP address manually To acquire the IP address automatically from a 5. Confirm the settings and click [Apply]. DHCP server To set the IP address manually PR-LN4 Software Guide 17 / 34...
- Page 18 To also create a "Original TCP/IP Port", click [Next]. *1) If you want to change any other detailed settings, you can change them by using a web browser. For details, refer to "5. CONFIGURATION USING a WEB BROWSER ". PR-LN4 Software Guide 18 / 34...
-
Page 19: Adding An Original Tcp/Ip Port
3. Confirm the settings and click [Apply]. 4. This completes adding the port. *1) In case you add port with this tool, Windows driver's port change is necessary. Please change the port, according to "3.2.4 CHANGE OF PORT". PR-LN4 Software Guide 19 / 34... -
Page 20: Change Of Port
3.2.4 CHANGE OF PORT Here we explain procedures for changing port to be printed. 1. Open the [Printer Folder]. 2. Open the "FUJITSU DL7400ProN " properties. 3. Click the [Ports] tab. 4. The following property screen is displayed. 5. Select the Port created. -
Page 21: Chapter 4 Printing Using The Regular Operating System Print Client
"The printer that I want isn’t listed" and select [Add a local printer or network printer with manual settings] check box. 2. Select the [Create a new port] option, and select [Standard TCP/IP Port] as the type. Click [Next]. PR-LN4 Software Guide 21 / 34... - Page 22 3. Enter the IP address configured in the PR-LN4 in [Hostname or IP address]. If you are using the standard value for the port name, [IP_] is not added. Set [Device type] to [AutoDetect], and clear the [Query the printer and automatically select the driver to use] check box.
- Page 23 If you will also be using this printer from other computers in the same network, select [Share]. 9. If necessary, please print the test page and to set the default printer. Then please click on the [Finish]. 10. Setting is complete. PR-LN4 Software Guide 23 / 34...
-
Page 24: Chapter 5 Configuring Using A Web Browser
USING A WEB BROWSER This section describes how to configure detailed settings using a web browser. Since the PR-LN4 is equipped with the HTTP protocol, you can configure detailed settings and change settings by using a web browser. Furthermore, this can also be used to restart the PR-LN4 remotely. -
Page 25: Configuration Settings From The Pr-Ln4 Web Page
5.2 CONFIGURATION SETTINGS FROM THE PR-LN4 WEB PAGE Click the item that you want to configure from the setting items displayed in the web browser to display the settings web page. Enter the setting values for the required items. 5.3 PR-LN4 WEB PAGE MENU STRUCTURE Click the item that you want to configure from the setting items displayed in the web browser to display the settings web page. -
Page 26: Print Server Functions
DHCP Sets the DHCP protocol to enabled (ENABLE) or ENABLE (*1) disabled (DISABLE). IP Address Sets the IP address of the PR-LN4 using the 192.168.1.1 decimal format "xxx.xxx.xxx.xxx". Subnet Mask Sets the subnet mask of the PR-LN4 using the 255.255.255.0 decimal format "xxx.xxx.xxx.xxx". - Page 27 Specify whether to ENABLE(1) or DISABLE(2) EnableAuthenTrap. Setting this parameter to ENABLE causes an SNMP trap to be issuing to the IP address (specified as the trap destination address) at the occurrence of an SNMP community violation. PR-LN4 Software Guide 27 / 34...
-
Page 28: Chapter 6 Troubleshooting
After this, restore the original network. *2) If you have any routers or servers configured with an invalid IP address and the TCP/IP setting in the PR-LN4 is set to [Automatically acquire an IP address], the PR-LN4 will automatically be set to an invalid IP address, and you will not be able to change or initialize the IP address. - Page 29 - Connect from the network before the move and perform the operation to restore factory defaults from the web page. *1) When you are connecting the printer where the PR-LN4 is attached to another network, always perform the operation to restore factory defaults.
-
Page 30: Problems During Printing
Check the following details, and then perform the setup procedure again. - Is the printer turned on? - Is the L/A LED alight on the PR-LN4 and connected Ethernet hub? - Is the network cable connected correctly. - Is the network cable broken? -
Page 31: Problems In The Windows Tcp/Ip Environment
Request timed out. Request timed out. *1) For details on how to restore the PR-LN4 to the factory default settings, refer to "5.3 PR-LN4 WEB PAGE MENU STRUCTURE" - "Factory default" in "5 CONFIGURING USING A WEB BROWSER". [Check 2] The printing destination port of the printer driver you are using might not have been configured. - Page 32 If this happens, perform the printing again. If the LAN cable is disconnected during printing and the following message is displayed, reconnect the LAN cable and turn the printer off and then on again. PR-LN4 Software Guide 32 / 34...
-
Page 33: Chapter 7 Usage Warnings
"Enable bidirectional support" checkbox in the "Ports" tab, and then click [OK] or [Apply]. (2) When you use the PR-LN4, do not "Print directly to the printer" is to not select. PR-LN4 Software Guide... - Page 34 © 2019 FUJITSU ISOTEC LIMITED...