Related Manuals for Honeywell PERFORMANCE LITE 2MP SD
Summary of Contents for Honeywell PERFORMANCE LITE 2MP SD
- Page 1 PERFORMANCE LITE 2MP SD CAMERA HIE2PI-S | HIB2PI-S | HIE2PIV-S | HIB2PIV-S User Manual...
- Page 3 Notes on Safety • Please use the specified power supply to connect. • Do not attempt to disassemble the camera; in order to prevent electric shock, do not remove screws or covers. • There are no user-serviceable parts inside. Please contact the nearest service centre as soon as possible if there is any failure.
- Page 5 Disclaimer & Regulatory Information Disclaimer With regard to the product with internet access, the use of product shall be wholly at your own risks. Our company shall be not responsible for abnormal operation, privacy leakage or other damages resulting from cyber attack, hacker attack, virus inspection, or other internet security risks;...
-
Page 7: Table Of Contents
Table of Contents Introduction Network Configuration TCP/IP Port Network Connection Server Configuration DDNS Configuration 802.1x Access through IP-Tool RTSP Directly Access through IE UPNP Mail configuration HTTPS Access through the router or virtual server Access through static IP Security Configuration User Configuration Online Video User Live View... -
Page 9: Introduction
Main Features • ICR auto switch, true day/night • 3D DNR, digital WDR • ROI coding • Support smart phone, iPad, remote monitoring Network Computer Network Hybrid DVR Moniter Network CMS/NVMS Performance Lite 2MP SD Camera - User Manual | Introduction... -
Page 10: Network Connection
1. Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed in the PC from the CD. 2. Double click on the IP-Tool icon on the desktop to run this software as shown below: Performance Lite 2MP SD Camera - User Manual | Network Connection... - Page 11 The system will pop up the above-mentioned textbox to ask you to change the default password. It is strongly recommended to change the default password for account security. If “Do not show again” is checked, the textbox will not appear next time. Performance Lite 2MP SD Camera - User Manual | Network Connection...
-
Page 12: Directly Access Through Ie
Open the network and share centre. Click “Local Area Connection” to pop up the following window. Select “Properties” and then select internet protocol according to the actual situation (for example: IPv4). Next, click “Properties” button to set the network of the PC. Performance Lite 2MP SD Camera - User Manual | Network Connection... - Page 13 2. Open the IE browser and enter the default address of IP-CAM and confirm. 3. Follow directions to download and install the Active X control. 4. Enter the default username and password in the login window and then enter to view. Performance Lite 2MP SD Camera - User Manual | Network Connection...
-
Page 14: Wan
1. Make sure the camera is connected to the local network and then log in the camera via LAN and go to Config > Network > Port menu to set the port number 2. Go to Config > Network > TCP/IPv4 menu to modify the IP address. Performance Lite 2MP SD Camera - User Manual | Network Connection... -
Page 15: Access Through Static Ip
2. Go to Config > Network > TCP/IP menu to set the IP address. Check “Use the following IP address” and then enter the static IP address and other parameters. 3. Open the IE browser and enter its WAN IP and http port to access. Performance Lite 2MP SD Camera - User Manual | Network Connection... -
Page 16: Live View
• The motion detection indicator will flash in live view interface only when the motion detection alarm is enabled. • In full screen mode, double click on the mouse to exit or press the ESC key on the keyboard. Performance Lite 2MP SD Camera - User Manual | List View... -
Page 17: Configuration
In the “Basic Information” interface, the system information of the device is listed. Date & Time Go to Config > System > Date and Time. Please refer to the following interface. Select the time zone and DST as desired. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 18: Local Configuration
2. Set record stream, pre-record time and cycle writing. Pre Record Time: Set the time to record before the actual recording begins. 3. Set schedule recording. Check “Enable Schedule Record” and set the schedule. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 19: Weekly Schedule
Manual Input: Click it for a specific day to enter specific start and end times. This adds more granularities (minutes). Day schedule Set the alarm time for a special day, such as a holiday. Note: Holiday schedule takes priority over weekly schedule. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 20: Image Configuration
Frequency: 50Hz and 60Hz can be optional. Day/night Mode: Please choose the mode as needed. Sensitivity: High, middle and low can be selected for switching back and forth from day to night modes. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 21: Video Stream
Video Stream The following interface will be displayed by clicking Config > Image > Video/Audio. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 22: Osd Configuration
Time stamp, device name and OSD can be set up here. After enabling the corresponding display and entering the content, drag them to change their position. Then press the “Save” button to save the settings. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 23: Video Mask
4. Return to the live to verify that the area have been drawn as shown as blocked out in the image. To clear the video mask: Click the “Clear” button to delete the current video mask area. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 24: Roi Configuration
1. Check “Enable” and then click the “Draw Area” button. 2. Drag the mouse to set the ROI area. 3. Set the level. 4. Click the “Save” button to save the settings. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 25: Alarm Configuration
After that, click the “Save” to save the settings. 3. Set the schedule of the motion detection. The setting steps are the same as the schedule recording setting (See schedule recording setting for more details). Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 26: Other Alarms
2. Click “Enable” and set the alarm holding time. 3. Tick “Trigger Email”. 4. Click “Save” to save the settings. Note: SD card full and SD card error are only available for the models with SD card slot. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 27: Alarm Server
If an alarm server is not needed, there is no need to configure this section. Network Configuration TCP/IP Go to Config > Network > TCP/IP interface as shown below. There are two ways for network connection. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 28: Port
Data Port: The default data port is 9008. It can be changed to any port which is not occupied. RTSP Port: The default port is 554. It can be changed to any port which is not occupied. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 29: Server Configuration
3. Input the above-mentioned server address, server port and device ID in the responding boxes. Click “Save” button to save the settings. DDNS Configuration If the camera is set up with a DHCP connection, DDNS should be set for the internet. 1. Go to Config > Network > DDNS. Performance Lite 2MP SD Camera - User Manual | Configuration... - Page 30 After the domain name is successfully applied for, the domain name will be listed as below. 3. Input the username, password, domain you apply for in the DDNS configuration interface. 4. Click “Save” button to save the settings. Performance Lite 2MP SD Camera - User Manual | Configuration...
-
Page 31: 802.1X
3. Authentication server provides the entity of authentication service for the switch, stored the relative information of web client, realizing the authentication of web client. Please refer to the user manual of the connected switch for more details. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 32: Rtsp
TCP mode, the video cannot be played. 5. If the coding format of the video of the main stream is MJPEG, the video may be disordered at some resolutions. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 33: Upnp
User name and password: sender’s user name and password. Server Address: The SMTP IP address or host name. Select the secure connection type at the “Secure Connection” pull-down list according to what’s required. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 34: Https
* If there is a signed certificate, click “Browse” to select it and then click “Install” to install it. * Click “Create a private certificate” to enter the following creation interface. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 35: Qos
Alarm DSCP: The range is from 0 to 63. Manager DSCP: The range is from 0 to 63. Generally speaking, the larger the number is, the higher the priority is. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 36: Security Configuration
1. Select a user to modify password and MAC address if necessary in the user configuration list box. 2. The “Edit user” dialog box pops up by clicking the “Modify” button. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 37: Online Video User
Check the “Enable address filtering” check box. Select “Block/Allow the following address”, IPv4/IPv6/MAC and then enter IP address or MAC address in the address box and click the “Add” button. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 38: Security Management
Anonymous/1) via web browser to access the camera. 1 indicates main stream; 2 indicates sub stream; 3 indicates third stream. Only video can be viewed by this means and no other operations can be done. Maintenance Configuration Backup and Restore Go to Config > Maintenance > Backup & Restore. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 39: Reboot
For some specified models, online upgrade is available. The setting steps are as follows. If no such function, please skip the instructions. 1. Create the upgrade file location and save it. 2. Check the latest version by clicking “Check version”. Click “Upgrade” to update the firmware online. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 40: Operation Log
1. Go to Config > Maintenance > Operation Log. 2. Select the main type, sub type, start and end time. 3. Click “Search” to view the operation log. 4. Click “Export” to export the operation log. Performance Lite 2MP SD Camera - User Manual | Configuration... -
Page 41: Search
Slide show play: Click this button to Stop: Click this button to stop the slide show. start the slide show mode. Play speed: Play speed of the slide show. Performance Lite 2MP SD Camera - User Manual | Search... -
Page 42: Video Search
2. Set search time: Select the date and choose the start and end time. 3. Click to search the images. 4. Double click on a file name in the list to start playback. Performance Lite 2MP SD Camera - User Manual | Search... -
Page 43: Sd Card Video Search
4. Select the alarm events at the bottom of the interface. 5. Select mix stream (video and audio stream) or video stream as needed. 6. Double click on a file name in the list to start playback. Performance Lite 2MP SD Camera - User Manual | Search... - Page 44 Click “Set up” to set the storage directory of the video files. Click “Open” to play the video. Click “Clear List” to clear the downloading list. Click “Close” to close the downloading window. Performance Lite 2MP SD Camera - User Manual | Search...
-
Page 45: Appendix 1 Q & A
3. Enable all the sub options under “ActiveX controls and plug-ins”. 4. Then click OK to finish setup. b. Other plug-ins or anti-virus blocks ActiveX. Please uninstall or close them. Performance Lite 2MP SD Camera - User Manual | Appendix 1 Q & A... - Page 46 Call: 1-800-103-0339 Performance Email: HoneywellSecurity&Fire@honeywell.com Lite Honeywell HBT India Buildings 2MP SD Unitech Trade Center, CAMERA 5th Floor, Sector-43, Block C, Sushant Lok Phase - I, Gurgaon - 122 002 SF-SMB-SB | Rev02 | 08/19 www.honeywell.com © 2018 Honeywell International Inc.