Page 2
2000 Matsushita Electric Industrial Co., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.
Page 3
1. INTRODUCTION 1.1. INTRODUCTION1 This service manual contains technical information which will allow service personnel's to understand and service this model.Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service manual.
12. Power Circuit 13. Ex. Input Circuit The following circuits are contained in Camera C.B.A. 1. Sub Connection Circuit 2. Lens Drive Circuit 3. Camera Circuit Comparison Chart Function NV-MX1 NV-MX3 NV-MX5 NV-MX7 Card Function (Multi Media Card, ——— ——— SD Card) External Input ———...
If you lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safety.
2.2.3. How to replace the Fuse 1. Remove the Fuse Cover with a screwdriver. 2. Replace the fuse and attach the Fuse cover. 3. SERVICE CAUTION 3.1. EEPROM DATA FOR SPARE PARTS OF THE VTR MAIN C.B.A. When the VTR Main C.B.A. is replaced, the fixed and average data must be changed by Goatskin kit according to the Movie Camera’s suffix.
Page 7
Ref. Part No. Part name Connection Q'ty Remarks VFK1491 Flat Cable FP701(Camera) - Lens Flex. As NV-DS99 VFK1460 Flat Cable PS201 (Camera) - PP291(CCD) As NV-EX1 VFK1173 Flat Cable PP1002(Main) - Battery Catcher As NV-DX1 VFK1443 Flat Cable FP2206(Main) - Sub Operation As NV-DS77 VFK1442 Flat Cable...
Page 8
4. PREPARATION FOR ELECTRICAL ADJUSTMENT 1. Unlock the locking tab and remove the EVR connector cover which is located on Side Case Unit as follows. 2. Then connect the following cables as shown inFig. Fig. E1 Part No. Part Name Q’ty Remarks VFK1395...
5. SERVICE MODE When undesirable conditions occurred, the error code is displayed on the EVF or LCD Monitor. Also, the Camera LED is flashed according to the error code as follows.
6. HOW TO REPLACE THE LITHIUM BATTERY (PROCEDURE) 1. Remove the Grip C.B.A. from Side Case (L). (Refer to Disassembly Procedures.) 2. Unsolder the Lithium Battery“VSB0407” and then replace the new one. (SeeFig. B1.) Fig. B1...
Page 11
Note: The lithium battery is a critical component. (Type No.: VSB0407 Manufactured by Panasonic.) It must never be subjected to excessive heat or discharge. It must therefore only be fitted in equipment designed specifically for its use. Replacement batteries must be of the same type and manufacture.
8. ADJUSTMENT PROCEDURES 8.1. DISASSEMBLE FLOW CHART This flow chart indicates the disassembly steps the cabinet parts, C.B.A. and Mecha. Unit in order to access to be serviced. When reinstalling, perform the steps in the reverse order. Fig. F1...
8.2. DISASSEMBLY PROCEDURES Flow-Chart for Disassembly Procedure No. Item/Part Fig. Removal (Screw& Other) 1. Front Case Fig. 1 1-Screw (A) Fig. 2 2-Screws (B/C) Unit Fig. 3 2-Screws (D/E) Disconnect the FP4901. Remove the Front Case Unit. 2. Side Case Fig.
Page 19
No. Item/Part Fig. Removal (Screw& Other) 4. EVF/ Rear Fig. 9 1-Screw (M) Case Unit Fig. 4-Screws (N/W) Disconnect the following connectors. FP3401/FP603/FP1002 Remove the EVF/Rear Case Unit. 5. VTR Main Fig. 1-Screw (O) C.B.A& Disconnect the FP4001/ FP2205 Mecha. Fig.
Page 20
No. Item/Part Fig. Removal (Screw& Other) 9. EVF Unit Fig. 2-Screws (V). Remove the EVF Unit from Rear Case Unit. Fig. Unlocks - (b) Remove the Eye Cap Unit. Remove the EVF Case (Upper). Fig. Remove the EVF 1(U)..EVF C.B.A Fig.
Fig. 19 8.3. DISASSEMBLY PROCEDURES OF CAMERA LENS UNIT The following flowchart describes order or steps for removing the Camera lens unit and certain printed circuit boards in order to make access to the item needing service. / To reassemble the unit follow the steps in reverse order.
14. REPLACEMENT PARTS LIST 14.1. FRAME& CASING SECTION (1) PARTS LIST...
Page 39
MF INSULATION SHEET 3 (1) VGQ5884 TAPE 4 (1) VXP2045 MF U. 5 (1) VYK9618 FRONT CASE (1) U. FOR NV-MX1,NV-MX5 5 (1) VYK9619 FRONT CASE (1) U. FOR NV-MX3,NV-MX7 6 (1) VEK8778 DEW SENSOR U. 7 (1) VEK9085 S JACK FLEX. U.
Page 56
INITIAL/LOGO ABBREVIATIONS INITIAL/LOGO ABBREVIATIONS A GND Analogue GND ALC MAIN Auto Level Control Drive A HASW Audio Head Amp Switching Pulse Address Latch Enable A HSW Audio Switching Pulse A-LOCK Full Auto Switch A MUTE Audio Mute A-MUT(H) Audio Mute (H) A ORP Audio Overlap Pulse ANLPTH...
Page 57
INITIAL/LOGO ABBREVIATIONS INITIAL/LOGO ABBREVIATIONS BLKZ Blanking Pulse for Zoom Encorder Channel 1 (Odd Field) Balance Modulator Character BQUIET Bus Out Control Signal CHR BACK Character Back-up BUF IN/OUT Buffer In/Out CHR MIX Character Mix B-Y KB B-Y Carrier Balance CI, CO Buffer In/Out B-YO B-Y Signal Out...
Page 58
INITIAL/LOGO ABBREVIATIONS INITIAL/LOGO ABBREVIATIONS Pre Apature Gain Control DISCS Dis Chip Select CRST Camera Reset DISP Display Chip Select Delay Line CS 0-7 Chrominance Signal Out 0-7 DOBCK Audio A/D Convertor Bit Clock CSEL Clock Phase Select DOCTL Data Output Control Signal CSI 0-7 Chrominance Signal In 0-7 DODAT...
Page 59
PLAY PAUSE STOP S6504 S6506 S6507 S6508 S6509 SUB CONNECTION AUTO/MNL MF/AF D GND D GND SCAN4 FULLAUTO/MANUAL PLAY S6503 STOP FP301 MENU FOCUS SCAN3 S6501 S6502 PAUSE MENU MF ENC2 MODE SW MF ENC1 SE GND SE GND CAMERA ADJ/VOL/JOG S6505 TO FRAME GND...
Page 62
GRIP C.B.A. VEP06D86A : NV-MX5,NV-MX7 VEP06D86B : NV-MX1,NV-MX3 NV-MX5, NV-MX7 ONLY NV-MX5, NV-MX7 ONLY NV-MX5, NV-MX7 R6101 ONLY FP6103 NV-MX5, NV-MX7 ONLY (COMPONENT SIDE) (FOIL SIDE)
Page 63
(NV-MX5,NV-MX7 ONLY) CARD GRIP FLEX. S/S POWER FLEX. D6103 B3ADB0000026 FP6103 FP6102 D GND D GND SCAN2 PWR RST POWER SW SCAN2 POWER SW D GND SCAN1 SCAN1 MODE MODE D6101 B3AAB0000067 CAM LED CAMERA DSC LED D6102 SML-310MTT86 VTR LED ZOOM/PHOTO FLEX.
Page 64
S6212 EJECT VSP0584-1 MAIN CONNECTION GRIP EJECT D GND D GND D GND D GND PWR RST PWR RST SCAN2 SCAN2 POWER SW POWER SW SCAN1 SCAN1 MODE MODE CAM LED CAM LED DSC LED DSC LED VTR LED VTR LED MEM/PHOTO SW MEM/PHOTO SW SCAN2...
Page 65
(NV-MX5,NV-MX7 ONLY) SD/SHOE C.B.A. FP802 FP801 FP603 BL 6V E COM FP2203 FP3401 BL 6V E G OUT S TAB MMC PRO V ST E R OUT D GND D GND BACK LIGHT V CK NOREG GND E B OUT D GND MMC DO NOREG GND...
Page 66
FP4001 FP451 JK2501 R IN R IN DIGITAL R IN STILL PICTURE T OUT D GND T OUT JK6401 CAMERA C.B.A. VTR MAIN C.B.A. D GND D GND EDIT S PLUG D GND (MINI) S C I/O S PLUG FP301 AV GND S C I/O AUTO/MNL...
Page 67
(MF SENSOR) (MF SENSOR) MIC UNIT SE GND MF LED MF VCC FP4902 MF L2 MF VCC MF L1 NOTE: DO NOT USE ANY PART NUMBER SHOWN ON THIS SCHEMATIC DIAGRAM FOR ORDERING.WHEN YOU ORDER A PART,PLEASE REFER TO PARTS LIST.
Page 73
A IN/OUT IRIS HOTSHOE COMP COPWER CONTROL 3PIN REG FOCUS M IN/OUT IN/OUT HP OUT SD/MMC SPEAKER 2ECM MIC (NV-MX1,NV-MX5 CAMERA EX INPUT AV DRIVER ONLY) OP AMP 2FCK OSC SW.OPAMP CDS.AGC CG.SSG AV OUTPUT V DRIVE DRIVER EXT INPUT...
Page 75
MAIN CONNECTION MMC PRO D GND MMC D0 MMC IN MMC CLK DSC 3.5V D GND MMC CMD MMC D3 FP3401 SHOE UNREG SHOE UNREG SHOE S DATA SHOE S CLK SHOE DET SHOE GND SHOE GND SHOE CONNECTION C.DET SHOE GND HS3401 K1NA09E00002...
Page 76
:VIDEO MAIN SIGNAL PATH FRONT-B AV GND FP452 S VIDEO S PLUG TO FRAME GND NOTE: DO NOT USE ANY PART NUMBER SHOWN ON THIS SCHEMATIC DIAGRAM FOR ORDERING.WHEN YOU ORDER A PART,PLEASE REFER TO PARTS LIST.
Page 77
POWER ON MODE GRIP SCAN2 POWER SW FP6102 D GND SCAN1 MODE...
Page 78
FADE STILL TITLE IN MULTI MAIN CONNECTION SP OUT1 SP OUT1 SPEAKER SP OUT1 UNIT SP OUT2 SP OUT2 SP OUT2 FP2206 SCAN1 TITLE IN SCAN3 MULTI SCAN2 FADE STILL...
Page 79
INITIAL/LOGO ABBREVIATIONS INITIAL/LOGO ABBREVIATIONS Equalizer Horizontal Drive Pulse Electric View Finder HDTV High Definition TV EXT DC External DC (AC Adaptor) Hexadecimal EXT DC(H) AC Adaptor DC (H) Hall Gain EXT NOREG AC Adaptor 6V Head Switching Pulse EXT S DATA Serial Data for Edit High Bright Signal EXT SCK...
Page 80
INITIAL/LOGO ABBREVIATIONS INITIAL/LOGO ABBREVIATIONS LPF Switch for Auto Focus P SW Power Switch PB1-3 PNP Base 1-3 M M1-3 Motor Coil Terminal 1 to 3 PBCTL Play Back Control MA0-5 Microprocessor Address Data 0-5 PBCTL Pre-Branking Control Mbps Megahertz Bit Per Second Head Amp Switch Modulation PBLK...
Page 81
INITIAL/LOGO ABBREVIATIONS INITIAL/LOGO ABBREVIATIONS RENCF Lens Control (Forward) Switching Pre-Drive Pulse RENCR Lens Control (Reverse) SYL EC Cylinder Torque Control RERASE Rotary Erase Head SYL FG Cylinder FG RGBIV1-2 1V Inverted Signal 1-2 RGO R/G OFF Offset Voltage for AWT R T PHOT Take-up Photo Transistor Capstan Direction (Reverse / Stop / Forward)
Page 82
INITIAL/LOGO ABBREVIATIONS INITIAL/LOGO ABBREVIATIONS VMODE NTSC/PAL Select Switch VMVH VH Filter Switching VORP Video Overlap Voltage Refference Bottom VRBS Voltage Refference Bottom Output VREF1R3V Refference Voltage 1.3V VREF3R3V Refference Voltage 3.3V VREFH Refference Voltage High Side VREFL Refference Voltage Low Side Refference Voltage Input Refference Voltage Output Voltage Refference Top...
Page 83
FP801-16 STOP FP801-17 STOP FP801-18 STOP IC901-2 STOP IC901-3 STOP 11.0Vp-p (20usec./div.) 11.0Vp-p (20usec./div.) 11.0Vp-p (20usec./div.) 2.7Vp-p (20usec./div.) 3.0Vp-p (20usec./div.) COLOUR BAR COLOUR BAR COLOUR BAR COLOUR BAR COLOUR BAR IC901-40 STOP IC901-43 STOP IC901-45 STOP IC901-58 STOP IC901-59 STOP 11.0Vp-p (20usec./div.) 11.0Vp-p (20usec./div.) 11.0Vp-p (20usec./div.)
Page 84
CCD FLEX. CARD C.B.A. : VEP22302 R292 IC291 C294 C295 1 2 3 4 5 6 7 (COMPONENT SIDE) (FOIL SIDE) NOTE:MULTILAYER C.B.A. THIS C.B.A. IS Multi-Layer C.B.A. THIS CIRCUIT BOARD SHOWS COMPONENT LAYOUT-PATTERN FOR COMPONENT SIDE AND FOIL SIDE. LAYOUT-PATTERNS ARE SINGLE PATTERN FOR EACH SIDE THAT MAKE EASY TO SIGHT THE COMPONENT LAYOUT.
Page 85
:VIDEO MAIN SIGNAL PATH SUB CONNECTION PP291 RC SUB A GND CL251 A GND A GND A GND A GND IC291 A GND D291 CCD 15V ICX288AKF MA143 CCD 15V (CCD) CCD -8V CCD -8V CL260 Q291 11.8 C295 C294 2SC4627J R292 35V2.2...
Page 86
:VIDEO MAIN SIGNAL PATH MAIN CONNECTION FP801 FP603-19 BL 6V FP603-18 BL 6V TO EVF LCD PANEL FP603-17 FP802 FP603-16 NOREG GND FP603-15 NOREG GND FP603-14 EVF 12V V ST FP603-13 V CK FP603-12 FP603-11 V ST FP603-10 V CK FP603-9 FP603-8 EVF ON...
Page 88
FRONT (B) C.B.A. : VEP27212B D453 D452 LB6406 LB6405 LB453 FP452 LB6401 TL01 (COMPONENT SIDE) (FOIL SIDE) IMPORTANT SAFETY NOTICE: COMPONENTS IDENTIFIED WITH THE MARK HAVE THE SPECIAL CHARACTERISTICS FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS, USE ONLY THE SAME TYPE.
Page 89
:VIDEO MAIN SIGNAL PATH LB451 LB6402 S-JACK J0JCC0000089 J0JBC0000014 FP452 LB453 J0JCC0000087 S PLUG AV GND LB6407 L6402 FP452 J0JCC0000089 G1C100KA0023 LB454 AV GND JK6401 C471 J0JCC0000087 C6403 K2HZ108B0003 6V22 LB6405 D453 MINI J0JBC0000014 B0BC6R100014 R451 0 SYSTEM MAIN CONNECTION FP451 LB6406 R2504...