Section 2. Details On Settings; References Of Firmware Versions; Settings Of Dip Switches - Epson TM-U675 Series Development Manual
Hide thumbs
Also See for TM-U675 Series:
- Service manual (326 pages) ,
- User manual (65 pages) ,
- Troubleshooting manual (14 pages)
Table of Contents
Advertisement
Section 2. Details on Settings
This section describes connection configurations and how to make the settings for the
TM-U675 printers.
2.1 References of Firmware Versions
Refer to the release notes (Relnote.txt).
2.2 Settings of DIP Switches
Confirm that the following settings have been made correctly.
1) Serial port
DIP-SW1
No.
Setting
1
OFF
2
OFF
3
OFF
4
OFF
5
OFF
6
OFF
7
ON
8
OFF
It is possible to change the settings of DIP-SW1-1 and DIP-SW1-2, but it is
recommended to leave them OFF.
Set DIP-SW1-3 (Handshake) to DTR/DSR.
Set DIP-SW1-4 (Bit length) to 8 bits.
Set DIP-SW1-5 to DIP-SW1-8 accordance with the port information.
The described set values are the default values. For the details, refer to the
product manual of the POSPrinter. Also, if these settings are changed, make sure
to change the port information using the SetupPOS utility.
Set DIP-SW2-2 in accordance with whether or not a customer display is
connected.
If connected, set to ON. If not, set to OFF.
Recommended
Recommended
Fixed at OFF
Fixed at OFF
Settable
Settable
Settable
Settable
2
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-U675)
Version 3.00 Feb. 2019
DIP-SW2
No.
Setting
1
OFF
2
OFF
3
OFF
4
OFF
5
OFF
6
OFF
7
OFF
8
OFF
Settable
Settable
Recommended
Settable
Fixed at OFF
Fixed at OFF
Fixed at OFF
Fixed at OFF
Advertisement
Table of Contents
