All manuals and user guides at all-guides.com
Quick Start Guide
VisionPRO Wi-Fi
Programmable
Thermostat
Model TH8320WF
1
Connect to your Wi-Fi network
1.1 Connect to your thermostat
1.1a Connect your wireless device to
your home network.
If you get stuck...
Any of these device types
this process, restart the thermostat
will work:
by removing the thermostat from
• Tablet (recommended)
the wallplate, wait for 5 seconds,
• Laptop (recommended)
and snap it back into place.
• Smartphone
Return to 1.1
View the Wi-Fi Enrollment video
at wifithermostat.com/videos
Need more help?
information in the User Guide.
1.1b Make sure the thermostat message
center displays Wi-Fi SETUP.
1.1c On the wireless device (tablet,
laptop, smartphone), view the
list of available Wi-Fi networks.
1.1d Connect to the network called
NewThermostat_123456
(the number will vary).
Note:
If you are asked to specify a home,
public, or office network, select
Home Network.
1.2 Join your home network
1.2a Open your web browser to access
the Thermostat Wi-Fi Setup page.
The browser should automatically
direct you to the correct page; if it
does not, go to http://192.168.1.1
1.2b Find the name of your home network
on this page and select it.
Note:
Some routers have enhanced
features such as guest networks; use
your home network.
1.2c Complete the instructions for joining
your Wi-Fi network and click on the
Connect button. (Depending on your
network setup, you may see an
instruction such as Enter Password
for your home network.)
Note:
If you did not correctly connect to
the thermostat, you may see your home
router page. If so, return to Step 1.1.
1.3 Make sure your thermostat is
connected
The message center on your thermostat
will now display CONNECTING... for up to
30 seconds.
1.3a Look at the thermostat display.
Verify that the message center
displays one of the following:
CONNECTION SUCCESSFUL
JOINED: [WI-FI NETWORK NAME]
YOU ARE ALMOST DONE
Note:
REGISTER AT TOTAL CONNECT
FAILURE or Wi-Fi SETUP in
If you see one of these messages,
the message center, confirm
continue to
Step 2
.
you correctly entered your home
network password in step 1.2c. If
correct, refer to the FAQ at
wifithermostat.com/support
Apple, iPhone, iPad, iPod touch and iTunes are
trademarks of Apple Inc. All other trademarks
are the property of their respective owners.
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
http://yourhome.honeywell.com
® U.S. Registered Trademark.
© 2012 Honeywell International Inc.
69-2735ES—01 M.S. 08-12
Printed in U.S.A.
2
To view and set your Wi-Fi thermostat remotely,
Getting Help
you must have a Total Connect Comfort
account. Follow the instructions below.
At any point in
View the Wi-Fi Thermostat Registration
video at wifithermostat.com/videos
2.1 Open the Total Connect Comfort
web site
.
Go to www.mytotalconnectcomfort.com
Find additional
2.2 Login or create an account
If you have an account,
Message Center
click Login
– or –
click Create An Account.
2.2a Follow the instructions on the
screen.
Check your email
Inside
2.2b
from My Total Connect Comfort.
This may take several minutes.
MORE
Note:
If you do not receive a response,
check your junk mailbox or use an
alternate e-mail address.
2.2c
Follow activation instructions
the email.
2.2d Log in.
2.3 Register your Wi-Fi thermostat
Thermostat Wi-Fi-Setup page
After you are logged in to your Total
Connect Comfort account, register
your thermostat.
2.3a Follow the instructions on
the screen. After adding
your thermostat location
you must enter your
thermostat's unique
identifiers:
• MAC ID
• MAC CRC
Note:
These IDs are listed on the
Thermostat ID Card included
in the thermostat package.
The IDs are not case sensitive.
2.3b Notice that when the thermostat
is successfully registered, the
Total Connect Comfort
registration screen will display
a SUCCESS message.
Inside
In the thermostat message
center you will see:
CONGRATULATIONS
MORE
SETUP COMPLETE!
If you see CONNECTION
2.3c Also notice that your thermostat
will now display its signal strength.
Congratulations! You're done.
You can now control your
thermostat from anywhere
through your tablet, laptop, or
69-2735ES-01
smartphone.
Total Connect Comfort free app
is available for Apple
iPad
at iTunes
for all Android
Setting Up Your Thermostat
1
Connect it to your home Wi-Fi network.
2
Register online for remote access.
Before you begin,
you may want to view our
installation video by scanning this QR
specification or visiting wifithermostat.com
Register online for remote access
for a response
in
Thermostat ID Card
Use the MAC ID and CRC ID to register
this product at
mytotalconnectcomfort.com
Carte d'identification de thermostat
Utilisez l'identification MAC et l'identification CRC pour
enregistrer ce produit à
mytotalconnectcomfort.com
Tarjeta de identificación del termostato
Utilice la identificación MAC y la identificación CRC para
inscribir este producto en
mytotalconnectcomfort.com
® U.S. Registered Trademark.
© 2012 Honeywell International Inc.
69-2723EFS—01 M.S. 04-12
Printed in U.S.A.
MAC ID
®
iPhone
®
,
®
and iPod touch
®
devices
®
®
or at Google Play
™
devices.
Download on
GET IT ON
iTunes
®
Code
HONEYWELL MODEL: TH8320WF
MAC ID:
MAC CRC:
69-2723EFS-01
MAC CRC