Advertisement
Quick Links
Thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
instructions
1. safeTy
9
Always perform automotive testing in a safe environment.
9
Keep your work area clean and well lit.
9
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
9
operate the tool in a well-ventilated work area.
do noT operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
8
8
do noT use the tool around corrosive chemicals which can damage the tool.
do noT abuse the flexible cable. Never use the flexible cable to carry the tool.
8
do noT drop the borescope, it is not shock proof.
8
Keep bystanders and children away while operating the tool.
9
9
Keep the tool dry, clean, free from oil, water and grease. use a small amount of mild detergent on a clean cloth to clean the outside
of the tool when necessary and store in a dry, childproof area.
Turn the borescope off when not in use.
9
Remove the batteries when cleaning the unit or before storing the unit for a long period of time.
9
When necessary replace all four batteries. Use only the size and type of battery specified.
9
2. inTroducTion
fitted with a 60mm screen and includes controls for light intensity, contrast, mirror flip function (to reverse image when using a 45
image rotation. Features waterproof probe pod with IP67 rating and supplied with AV-out cable. Powered by 4xAA batteries (supplied).
3. specificaTion
model no ................................................................... VS8199
camera Ø ...................................................................... 8mm
field of Vision ...................................................................48
Pod length ................................................................... 46mm
camera Probe Length ................................................ 980mm
Adjustable Light Control ................................................... Yes
screen Size .................................................................. 60mm
screen resoltion ...................................................... 640x480
mirror flip/rotate function ............................................... Yes
AV Out .............................................................................. Yes
Accessories ..............................45° Mirror, Magnetic Pick-Up,
................................................................. Hookx2, AV Cable
Power source ............................................... 4xAA (supplied)
4. operaTion
4.1.
install batterries.
4.1.1.
Remove battery cover from back of borescope.
4.1.2.
Insert 4xAA batterries into battery compartment.
4.1.3.
ensure they are positioned with the correct orientation
as shown inside the compartment.
4.1.4.
Replace the battery cover.
© Jack sealey limited
instructions for
video borescope Ø8mm probe
vs8199
model no:
o
Original Language Version
o
mirror) and
fig.1
VS8199
| Issue 1 18/10/16
Advertisement
Related Manuals for Sealey VS8199
Summary of Contents for Sealey VS8199
- Page 1 Thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 See section 4.1 Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered wih Valpak’s registered compliance scheme. Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705.