Verify Chassis Installation - Cisco 8800 Series Hardware Installation Manual
Hide thumbs
Also See for 8800 Series:
- Manual (544 pages) ,
- Administration manual (406 pages) ,
- User manual (218 pages)
Table of Contents
Advertisement
Verify Chassis Installation
When you enter the same password, the software accepts the password.
Step 5
Enter the configuration mode.
Step 6
Enter the IP address for the management interface. If using dual RPs, enter the IP address on both management
interfaces.
Step 7
Enter a network mask for the management interface.
Step 8
The software asks whether you want to edit the configuration. Enter 'no' to decline.
Verify Chassis Installation
After installing the chassis, use the following show commands to verify the installation and configuration in
the EXEC mode. Any issue if detected, take corrective action before making further configurations.
Command
Description
show platform
Displays the state information of each card.
show redundancy
Displays the status of route processor redundancy.
show led
Displays LED information for the router, or for a specific LED location.
show hw-module fpd
Displays field-programmable device (FPD) compatibility for all modules or a specific module.
show alarms brief system
Displays all existing alarms in the router.
active
show media
Displays the current state of the disk storage media.
show inventory
Displays information about the field replaceable units (FRUs), including product IDs, serial numbers,
and version IDs.
show environment
Displays all the environment-related router information.
Hardware Installation Guide for Cisco 8800 Series Routers
88
Connect Router to the Network
Hide quick links:
Advertisement
Table of Contents
