hit counter script
Yamaha YZF-R125 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Motorcycle
  5. YZF-R125
  6. Owner's manual

Yamaha YZF-R125 Owner's Manual

Hide thumbs Also See for YZF-R125:
Table of Contents

Advertisement

Quick Links

OWNER'S MANUAL
YZF-R125
MOTORCYCLE
Read this manual carefully before oper-
ating this vehicle.
YZF125-A
B5G-F8199-E0

Advertisement

Table of Contents
loading

Related Manuals for Yamaha YZF-R125

Summary of Contents for Yamaha YZF-R125

  • Page 1 OWNER’S MANUAL YZF-R125 MOTORCYCLE Read this manual carefully before oper- ating this vehicle. YZF125-A B5G-F8199-E0...
  • Page 2 EAU46094 Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold.
  • Page 3 If you have any further questions, do not hesitate to contact your Yamaha dealer. The Yamaha team wishes you many safe and pleasant rides. So, remember to put safety first! Yamaha continually seeks advancements in product design and quality. There-...
  • Page 4 Important manual information EAU63350 Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential personal injury haz- ards. Obey all safety messages that follow this symbol to avoid possible injury or death.

  • Page 5: Table Of Contents

    Table of contents Safety information ......1-1 Checking the spark plug....6-9 Engine oil and oil filter element ..6-10 Description ........2-1 Why Yamalube......6-12 Left view ..........2-1 Coolant ......... 6-13 Right view........2-2 Replacing the air filter element Controls and instruments....2-3 and cleaning the check hose..
  • Page 6 Table of contents Replacing a turn signal light bulb ........... 6-35 Replacing the license plate light bulb ........... 6-35 Supporting the motorcycle... 6-36 Troubleshooting......6-36 Troubleshooting charts....6-37 Motorcycle care and storage..7-1 Matte color caution ......7-1 Care ..........7-1 Storage ...........

  • Page 7: Safety Information

    Safety information an accident or equipment damage. EAU1028C See page 4-1 for a list of pre-operation checks. Be a Responsible Owner  This motorcycle is designed to As the vehicle’s owner, you are re- carry the operator and a passen- sponsible for the safe and proper oper- ger.
  • Page 8 Safety information  Many accidents involve inexperi- • The passenger should always enced operators. In fact, many op- hold onto the operator, the seat erators who have been involved in strap or grab bar, if equipped, accidents do not even have a cur- with both hands and keep both rent motorcycle license.
  • Page 9 Safety information extra care when riding a motorcycle Avoid Carbon Monoxide Poisoning All engine exhaust contains carbon that has added cargo or accessories. monoxide, a deadly gas. Breathing Here, along with the information about carbon monoxide can cause head- accessories below, are some general aches, dizziness, drowsiness, nausea, guidelines to follow if loading cargo to confusion, and eventually death.
  • Page 10 Genuine before using it to make sure that it Yamaha accessories, which are avail- does not in any way reduce able only from a Yamaha dealer, have ground clearance or cornering been designed, tested, and approved clearance, limit suspension travel, by Yamaha for use on your vehicle.
  • Page 11 Safety information operator and may limit control handlebars or turn signals, or ability, therefore, such accesso- parts that could break). Choose ries are not recommended. the location for the straps carefully  Use caution when adding electri- so the straps will not rub against cal accessories.

  • Page 12: Description

    Description EAU63371 Left view 1. Fuel tank cap (page 3-16) 2. Battery (page 6-31) 3. Fuses (page 6-33) 4. Owner’s tool kit (page 6-2) 5. Sidestand (page 3-20) 6. Air filter check hose 7. Shift pedal (page 3-13) 8. Idle adjusting screw (page 6-15) 9.

  • Page 13: Right View

    Description EAU63391 Right view 1. Rear turn signal lights (page 6-35) 2. Seat lock (page 3-19) 3. Front turn signal light (page 6-35) 4. Engine oil filter element (page 6-10) 5. Dipstick (page 6-10) 6. Brake pedal (page 3-14) 7. Rear brake fluid reservoir (page 6-23)

  • Page 14: Controls And Instruments

    Description EAU63401 Controls and instruments 1. Clutch lever (page 3-13) 2. Left handlebar switches (page 3-12) 3. Multi-function meter unit (page 3-4) 4. Main switch/steering lock (page 3-1) 5. Front brake fluid reservoir (page 6-23) 6. Right handlebar switches (page 3-12) 7.

  • Page 15: Instrument And Control Functions

    Instrument and control functions EAU10462 EAU10696 Main switch/steering lock LOCK The steering is locked and all electrical systems are off. The key can be re- moved. To lock the steering ZAUE0971 The main switch/steering lock controls the ignition and lighting systems, and is used to lock the steering.

  • Page 16: Indicator Lights And Warning Lights

    Instrument and control functions From the “LOCK” position, push the EAU4939G Indicator lights and warning key and turn it to “OFF”. lights ZAUM1566 1. Shift timing indicator light 2. Turn signal indicator light “ ” 3. High beam indicator light “ ”...
  • Page 17 If the light does not come light does not go off after traveling 10 on, or if the light remains on, have a km/h (6 mi/h), have a Yamaha dealer Yamaha dealer check the vehicle. check the vehicle.

  • Page 18: Multi-Function Meter Unit

    Instrument and control functions  For the UK: To switch between ki- EAUM4010 Multi-function meter unit lometers and miles, press and hold the “SELECT” button. Speedometer ZAUM1567 1. “SELECT” button 2. “RESET” button EWA12423 WARNING ZAUM1568 Be sure to stop the vehicle before 1.
  • Page 19 If this occurs, have a within the ideal power range. Yamaha dealer check the vehicle. ECA23050 NOTICE Do not operate the engine in the ta- chometer high-r/min zone. High-r/min zone: 11000 r/min and...
  • Page 20 Instrument and control functions Push the “SELECT” button to switch Transmission gear display the display between the odometer mode “ODO”, tripmeters mode “TRIP 1” and “TRIP 2”, instantaneous fuel consumption mode “km/L” or “L/100 km”, average fuel consumption mode “AVE_ _._ km/L” or “AVE_ _._ L/100 km”...
  • Page 21 Instrument and control functions tween the various tripmeter, odometer, Tripmeters mode instantaneous fuel consumption, aver- age fuel consumption, and average speed modes in the following order: TRIP F → km/L or L/100 km → AVE_ _._ km/L or AVE_ _._ L/100 km → AVE_ _._ km/h →...
  • Page 22 Instrument and control functions The instantaneous fuel consumption The average fuel consumption can be can be set to either “km/L”, “L/100 km” set to either “AVE_ _._ km/L”, “AVE_ or “MPG” (for the UK). _._ L/100 km” or “AVE_ _ _._ MPG” (for To switch the instantaneous fuel con- the UK).
  • Page 23 Instrument and control functions  Shift timing light activation point: Average speed mode this function allows you to select the engine speed at which the in- dicator light is activated.  Shift timing light deactivation point: this function allows you to select the engine speed at which the indicator light is deactivated.
  • Page 24 Instrument and control functions  Flash: indicator light To set the shift deactivation point flashes when activated. (This setting is selected when the  The shift timing indicator light de- indicator light flashes four activation point can be set be- times per second.) tween 9000 r/min and 13000 ...
  • Page 25 If the display indicates any error codes, note the code number, and then have a Yamaha dealer check the vehicle. ZAUM1581 ECA11591 NOTICE 1. Hyphen 2.

  • Page 26: Handlebar Switches

    Instrument and control functions EAU1234M EAU12461 Handlebar switches Turn signal switch “ ” To signal a right-hand turn, push this Left switch to “ ”. To signal a left-hand turn, push this switch to “ ”. When released, the switch returns to the cen- ter position.

  • Page 27: Clutch Lever

    Instrument and control functions EAU12822 EAU12876 Clutch lever Shift pedal ZAUM1585 ZAUM1586 1. Clutch lever 1. Shift pedal The clutch lever is located on the left The shift pedal is located on the left side of the handlebar. To disengage side of the motorcycle.

  • Page 28: Brake Lever

    Instrument and control functions EAU12892 EAU12944 Brake lever Brake pedal ZAUM1587 ZAUM1588 1. Brake lever 1. Brake pedal The brake lever is located on the right The brake pedal is located on the right side of the handlebar. To apply the side of the motorcycle.

  • Page 29: Abs

    Instrument and control functions  This ABS has a test mode which EAU63040 allows the owner to experience The Yamaha ABS (Anti-lock Brake the pulsation at the brake lever or System) features a dual electronic con- brake pedal when the ABS is op- trol system, which acts on the front and erating.

  • Page 30: Fuel Tank Cap

    Instrument and control functions EAU13076 EAU13213 Fuel tank cap Fuel Make sure there is sufficient gasoline in the tank. EWA10882 WARNING Gasoline and gasoline vapors are extremely flammable. To avoid fires and explosions and to reduce the risk of injury when refueling, follow these instructions.
  • Page 31  Check that gasoline nozzle has line spills on your clothing, change the same identifier when fueling. your clothes. Your Yamaha engine has been de- signed to use premium unleaded gas- EAU75320 oline with a research octane number of 95 or higher. If knocking (or pinging)

  • Page 32: Fuel Tank Overflow Hose

    Instrument and control functions EAU58301 EAU13434 Fuel tank overflow hose Catalytic converter This model is equipped with a catalytic converter in the exhaust system. EWA10863 WARNING The exhaust system is hot after op- eration. To prevent a fire hazard or burns: ...

  • Page 33: Seats

    Instrument and control functions EAUE3431 Seats Passenger seat To remove the passenger seat 1. Remove the plastic cover. ZAUE3365 1. Projection 2. Seat holder 2. Install the passenger seat by in- stalling and tightening the nut to the specified torque. ZAUE3363 Tightening torque: 1.

  • Page 34: Sidestand

    Therefore, check this system regularly and have a Yamaha dealer repair it if it does not function properly. 3-20...

  • Page 35: Ignition Circuit Cut-Off System

    Instrument and control functions EAU66730 Ignition circuit cut-off system The ignition circuit cut-off system (comprising the sidestand switch, clutch switch and neutral switch) has the following functions.  It prevents starting when the transmission is in gear and the sidestand is up, but the clutch le- ver is not pulled.
  • Page 36 Does the engine start? The neutral switch may not be working correctly. The motorcycle should not be ridden until checked by a Yamaha dealer. With the engine still running: 6. Move the sidestand up. 7. Keep the clutch lever pulled.

  • Page 37: For Your Safety - Pre-Operation Checks

    Do not operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures provided in this manual, have the vehicle inspected by a Yamaha dealer. Before using this vehicle, check the following points:...
  • Page 38 • Tighten if necessary. Instruments, lights, • Check operation. — signals and switches • Correct if necessary. • Check operation of ignition circuit cut-off system. Sidestand switch • If system is not working correctly, have Yamaha dealer 3-20 check vehicle.

  • Page 39: Operation And Important Riding Points

    This model is equipped with a lean an- there is a control or function you do not gle sensor to stop the engine in case of understand, ask your Yamaha dealer. a turnover. To start the engine after a EWA10272...

  • Page 40: Starting The Engine

    ECA24110 NOTICE If a warning or indicator light does not work as described above, have a Yamaha dealer check the vehicle. 3. Shift the transmission into neutral. 4. Push the start switch to crank the engine with the starter. Release the start switch when the engine starts, or after 5 seconds.

  • Page 41: Shifting

    Operation and important riding points EAU16674 and drive train, which are not Shifting designed withstand shock of forced shifting. ZAUM1592 1. Neutral position 2. Shift pedal Shifting gears lets you control the amount of engine power available for starting off, accelerating, climbing hills, etc.

  • Page 42: Tips For Reducing Fuel Consumption

    Operation and important riding points EAU16811 EAU16831 Tips for reducing fuel con- Engine break-in sumption There is never a more important period in the life of your engine than the period Fuel consumption depends largely on between 0 and 1000 km (600 mi). For your riding style.

  • Page 43: Parking

    Yamaha dealer check the vehi- touch them and be burned. cle.  Do not park on a slope or on soft...

  • Page 44: Periodic Maintenance And Adjustment

    If you are not familiar with vehicle ser- vice, have a Yamaha dealer perform service. EWA15123 WARNING Turn off the engine when performing...

  • Page 45: Owner's Tool Kit

    If you do not have the tools or experi- ence required for a particular job, have a Yamaha dealer perform it for you.

  • Page 46: Periodic Maintenance Chart For The Emission Control System

     From 30000 km (17500 mi), repeat the maintenance intervals starting from 6000 km (3500 mi).  Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills. EAU71060...

  • Page 47: General Maintenance And Lubrication Chart

    X 1000 mi 10.5 14 • Perform dynamic inspection us- Diagnostic system √ √ √ √ √ √ ing Yamaha diagnostic tool. check • Check the error codes. √ √ • Clean. 2 * Air filter element √ √ • Replace.
  • Page 48 Periodic maintenance and adjustment ODOMETER CHECK OR READING MAINTENANCE JOB ITEM X 1000 km X 1000 mi 10.5 14 • Check operation and for exces- √ √ √ √ sive play. Swingarm pivot 13 * bearings • Lubricate with lithium-soap- Every 24000 km (14000 mi) based grease.
  • Page 49 Periodic maintenance and adjustment ODOMETER CHECK OR READING MAINTENANCE JOB ITEM X 1000 km X 1000 mi 10.5 14 √ √ √ √ Rear suspension • Check operation. relay arm and con- 25 * • Lubricate with lithium-soap- necting arm pivot- √...

  • Page 50: Removing And Installing Cowlings

    Periodic maintenance and adjustment EAU18782 Removing and installing cowl- The quick fastener is removed by ings pushing the center pin in with a screw- The cowlings shown need to be re- driver, then pulling the fastener out. moved to perform some of the mainte- nance jobs described in this chapter.
  • Page 51 Periodic maintenance and adjustment To install the cowling 1. Place the cowling in the original position, and then install the screws and quick fastener. 2. Install the cowling B. (See page 6-7.) ZAUM1618 1. Screw 2. Quick fastener 3. Cowling B 4.

  • Page 52: Checking The Spark Plug

    Do not attempt to diagnose such problems Tightening torque: Spark plug: yourself. Instead, have a Yamaha deal- 12.5 N·m (1.25 kgf·m, 9.22 lb·ft) er check the vehicle. If the spark plug shows signs of elec- trode erosion and excessive carbon or other deposits, it should be replaced.

  • Page 53: Engine Oil And Oil Filter Element

    Periodic maintenance and adjustment EAUM4051 Engine oil and oil filter ele- ment The engine oil level should be checked before each ride. In addition, the oil must be changed and the oil filter ele- ment replaced at the intervals specified in the periodic maintenance and lubri- cation chart.
  • Page 54 Periodic maintenance and adjustment ZAUE0672 1. Engine oil drain bolt 1. Oil filter element 2. O-ring 2. O-ring 3. Compression spring 8. Install the oil filter element cover 4. Strainer by installing the bolts, then tight- 5. Oil pan ening them to the specified 5.

  • Page 55: Why Yamalube

    Periodic maintenance and adjustment EAU85450 Recommended engine oil: Why Yamalube See page 8-1. YAMALUBE oil is a Genuine YAMAHA Oil quantity: Part born of the engineers’ passion Oil change: and belief that engine oil is an impor- 0.85 L (0.90 US qt, 0.75 Imp.qt) With oil filter removal: tant liquid engine component.

  • Page 56: Coolant

    Periodic maintenance and adjustment EAU20071 Coolant The coolant level should be checked before each ride. In addition, the cool- ant must be changed at the intervals specified in the periodic maintenance and lubrication chart. FULL EAUE3460 To check the coolant level ZAUE3384 1.

  • Page 57: Replacing The Air Filter Element And Cleaning The Check Hose

    Have a Yamaha dealer replace [ECA10473] the air filter element more frequently if Coolant reservoir capacity (up to you are riding in unusually wet or dusty the maximum level mark): areas.

  • Page 58: Adjusting The Engine Idling Speed

    (a). To decrease the throt- tle grip free play, turn the adjusting If the specified idling speed cannot be nut in direction (b). obtained as described above, have a Yamaha dealer make the adjustment. 6-15...

  • Page 59: Valve Clearance

    1. Adjusting nut To prevent this from occurring, have 2. Locknut your Yamaha dealer check and adjust the valve clearance at regular intervals. 4. Tighten the locknut and then slide the rubber cover to its original po- sition.

  • Page 60: Tires

    The tires must be checked before each ride. If the center tread depth reaches the specified limit, if the tire has a nail or glass fragments in it, or if the side- wall is cracked, have a Yamaha dealer replace the tire immediately. 6-17...
  • Page 61 EWA10472 their suitability for further use. WARNING EWA16101  Have a Yamaha dealer replace WARNING excessively worn tires. Besides  The front and rear tires should being illegal, operating the vehi- be of the same make and de-...

  • Page 62: Cast Wheels

    Rear tire: ride. If any damage is found, have Size: 140/70-17M/C 66S a Yamaha dealer replace the Manufacturer/model: wheel. Do not attempt even the MICHELIN PILOT STREET smallest repair to the wheel. A de-...

  • Page 63: Adjusting The Clutch Lever Free Play

    Periodic maintenance and adjustment EAU33893 Adjusting the clutch lever free play Measure the clutch lever free play as shown. ZAUM1598 1. Clutch lever free play adjusting nut (crank- case) 2. Locknut 3. To increase the clutch lever free play, turn the clutch lever free play ZAUM1597 1.

  • Page 64: Checking The Front Brake Lever Free Play

    2.0–5.0 mm (0.08–0.20 in) 3.5–4.5 mm (0.14–0.18 in) Periodically check the brake lever free Periodically check the brake pedal free play and, if necessary, have a Yamaha play and, if necessary, have a Yamaha dealer check the brake system. dealer adjust it.

  • Page 65: Brake Light Switches

    To check the brake pad wear, check the wear indicator groove. If a brake pad has worn to the point that the wear indicator groove has almost disap- peared, have a Yamaha dealer replace the brake pads as a set. 6-22...

  • Page 66: Checking The Brake Fluid Level

    If a brake pad has worn to the point that the wear Rear brake indicator grooves have almost disap- peared, have a Yamaha dealer replace the brake pads as a set. ZAUM1603 1. Minimum level mark...

  • Page 67: Changing The Brake Fluid

     Clean the filler cap before re- EAU22734 Changing the brake fluid moving. Use only DOT 4 brake Have a Yamaha dealer change the fluid from a sealed container. brake fluid every 2 years. In addition,  Use only the specified brake flu- have the seals of the master cylinders id;...

  • Page 68: Drive Chain Slack

    EAU22762 EAU3431A Drive chain slack To adjust the drive chain slack Consult a Yamaha dealer before ad- The drive chain slack should be justing the drive chain slack. checked before each ride and adjusted 1. Loosen the axle nut and the lock- if necessary.

  • Page 69: Cleaning And Lubricating The Drive Chain

    Periodic maintenance and adjustment 3. Tighten the axle nut, then the lock- EAU23026 Cleaning and lubricating the nuts to their specified torques. drive chain The drive chain must be cleaned and Tightening torques: Axle nut: lubricated at the intervals specified in 85 N·m (8.5 kgf·m, 63 lb·ft) the periodic maintenance and lubrica- Locknut:...

  • Page 70: Checking And Lubricating The Cables

    Yamaha dealer at the intervals cated if necessary. If a cable is specified in the periodic maintenance damaged or does not move smoothly, chart.

  • Page 71: Checking And Lubricating The Brake And Shift Pedals

    Periodic maintenance and adjustment EAU44276 EAU23144 Checking and lubricating the Checking and lubricating the brake and shift pedals brake and clutch levers The operation of the brake and shift The operation of the brake and clutch pedals should be checked before each levers should be checked before each ride, and the pedal pivots should be lu- ride, and the lever pivots should be lu-...

  • Page 72: Checking And Lubricating The Sidestand

    EAU23203 EAUM1653 Checking and lubricating the Lubricating the swingarm piv- sidestand The swingarm pivots must be lubricat- ed by a Yamaha dealer at the intervals specified in the periodic maintenance and lubrication chart. Recommended lubricant: Lithium-soap-based grease ZAUM1620 The operation of the sidestand should...

  • Page 73: Checking The Front Fork

    If any free over. play can be felt, have a Yamaha [EWA10752] 2. While applying the front brake, dealer check or repair the steer- push down hard on the handle- ing.

  • Page 74: Checking The Wheel Bearings

    5. Positive battery lead (red) hub or if the wheel does not turn The battery is located under the rider smoothly, have a Yamaha dealer seat. It is a VRLA (valve-regulated lead- check the wheel bearings. acid) battery. There is no need to check the electrolyte or to add distilled water.
  • Page 75 NOTICE Always keep the battery charged. To charge the battery Storing a discharged battery can Have your Yamaha dealer charge the cause permanent battery damage. battery if it seems to have discharged. Keep in mind that the battery tends to...

  • Page 76: Replacing The Fuses

    EAUM2415 Replacing the fuses the electrical circuit in question to check if the device operates. 4. If the fuse immediately blows again, have a Yamaha dealer check the electrical system. ZAUM1611 1. Fuse box 2. Spare fuse 3. ABS control unit fuse 4.

  • Page 77: Vehicle Lights

    This model is equipped with full-LED lighting. There are no user replaceable bulbs. If a light does not come on, check the fuses and then have a Yamaha dealer check the vehicle. ECA16581 NOTICE Do not affix any type of tinted film or stickers to the headlight lens.

  • Page 78: Replacing A Turn Signal Light Bulb

    Periodic maintenance and adjustment EAU62590 EAUM3510 Replacing a turn signal light Replacing the license plate bulb light bulb 1. Remove the turn signal light lens 1. Remove the license plate light unit by removing the screw. by removing the screw. ZAUM1621 1.

  • Page 79: Supporting The Motorcycle

    1. Maintenance stand (example) self. However, should your motorcycle Since this model is not equipped with a require any repair, take it to a Yamaha centerstand, use maintenance stands dealer, whose skilled technicians have when removing the front or rear wheel...

  • Page 80: Troubleshooting Charts

    Check the vehicle. compression. 4. Compression The engine does not start. There is compression. Have a Yamaha dealer check the vehicle. Operate the electric starter. There is no Have a Yamaha dealer check the vehicle. compression. 6-37...
  • Page 81 Start the engine. If the engine overheats again, The coolant level is have a Yamaha dealer check and repair the cooling system. If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended coolant as soon as possible.

  • Page 82: Motorcycle Care And Storage

    Rust and corrosion can develop matte colored finished parts. Be even if high-quality components are sure to consult a Yamaha dealer for used. A rusty exhaust pipe may go un- advice on what products to use be- noticed on a car, however, it detracts fore cleaning the vehicle.
  • Page 83 Motorcycle care and storage fected area any longer than in- scratching. Some cleaning structed. Also, thoroughly rinse compounds for plastic may the area off with water, immedi- leave scratches on the wind- ately dry it, and then apply a cor- shield.
  • Page 84  Consult a Yamaha dealer for ad- 4. To prevent corrosion, it is recom- vice on what products to use. mended to apply a corrosion pro- ...

  • Page 85: Storage

    Motorcycle care and storage head so that the electrodes are EAU43204 Storage grounded. (This will limit spark- ing during the next step.) Short-term d. Turn the engine over several Always store your motorcycle in a cool, times with the starter. (This will dry place and, if necessary, protect it coat the cylinder wall with oil.) against dust with a porous cover.
  • Page 86 Motorcycle care and storage Make any necessary repairs before storing the motorcycle.

  • Page 87: Specifications

    Specifications Dimensions: Coolant quantity: Overall length: Coolant reservoir (up to the maximum level 1990 mm (78.3 in) mark): Overall width: 0.15 L (0.16 US qt, 0.13 Imp.qt) 755 mm (29.7 in) Radiator (including all routes): Overall height: 0.49 L (0.52 US qt, 0.43 Imp.qt) 1140 mm (44.9 in) Fuel: Seat height:...
  • Page 88 Specifications (Total weight of rider, passenger, cargo and accessories) Front brake: Type: Hydraulic single disc brake Rear brake: Type: Hydraulic single disc brake Front suspension: Type: Telescopic fork Rear suspension: Type: Swingarm (link suspension) Electrical system: System voltage: 12 V Battery: Model: GTZ4V...

  • Page 89: Consumer Information

    Yamaha dealer. area. VEHICLE IDENTIFICATION NUMBER: EAU26442 Engine serial number...

  • Page 90: Diagnostic Connectors

    Consumer information the space provided. This information EAUM3881 Diagnostic connectors will be needed when ordering spare parts from a Yamaha dealer. ZAUM1614 1. ABS diagnostic connector 2. FI diagnostic connector The ABS and Fuel Injection diagnostic connectors are located as shown.

  • Page 91: Vehicle Data Recording

    Privacy Policy. Privacy Policy https://www.yamaha-motor.eu/eu/ privacy/privacy-policy.aspx Yamaha will not disclose this data to a third party except in the following cas- es. In addition, Yamaha may provide vehicle data to a contractor in order to outsource services related to the han- dling of vehicle data.

  • Page 92: Index

    Index High beam indicator light ....... 3-2 Horn switch .......... 3-12 ABS............3-15 ABS warning light ........3-3 Air filter element and check hose, Identification numbers......9-1 replacing and cleaning .......6-14 Ignition circuit cut-off system....3-21 Indicator lights and warning lights ..3-2 Battery ..........6-31 Brake and clutch levers, checking and License plate light bulb, replacing..
  • Page 93 Index Valve clearance ........6-16 Vehicle identification number ....9-1 Vehicle lights ........6-34 Wheel bearings, checking ....6-31 Wheels..........6-19 Yamalube ..........6-12 10-2...
  • Page 96 Original instructions MBK Industrie Z.I. de Rouvroy 02100 Saint Quentin SAS au capital de 14 000 000 € PRINTED IN FRANCE 2018.09 (E)

This manual is also suitable for:

Yzf125-a

Table of Contents

Save PDF