hit counter script
Panasonic NV-SJ4130PN Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. VCR
  5. NV-SJ4130PN
  6. Service manual

Panasonic NV-SJ4130PN Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ORDER NO. VRD0112042C3
Video Cassette Recorder
NV-SJ4130PN / NV-FJ6130PN
SPECIFICATIONS
2001 Matsushita Electric Industrial Co., Ltd. All rights reserved.
Unauthorized copying and distribution is a violation of law.
1

Advertisement

Table of Contents
loading

Related Manuals for Panasonic NV-SJ4130PN

Summary of Contents for Panasonic NV-SJ4130PN

  • Page 1 ORDER NO. VRD0112042C3 Video Cassette Recorder NV-SJ4130PN / NV-FJ6130PN SPECIFICATIONS 2001 Matsushita Electric Industrial Co., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.

  • Page 2: Safety Precautions

    1. SAFETY PRECAUTIONS GENERAL GUIDELINES 1. IMPORTANT SAFETY NOTICE There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Circuit Board Layout, Exploded Views and Replacement Parts List. It is essential that these criticalparts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards.

  • Page 3: Prevention Of Electro-Static Discharge

    equipment such as screwheads, connectors, control shafts, etc. When the exposed metallic part has a return path to thechassis, the reading should be between 1 M and 5.2 M . When the exposed metal does not have a return path to the chassis, the reading must be infinity.
  • Page 4 components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits, some field-effect transistorsand semiconductor "chip" components. The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD). 1.

  • Page 5: Service Notes (Please Read)

    carpeted floor can generate static electricity (ESD)sufficient to damage an ES device). "NOTE to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-22 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding systemof the building, as close to the point of cable entry as practical."...
  • Page 6 Fig. 1-4 Fig. 1-5...
  • Page 7 3. When 1 to 4 listed in Lock code occurs, Lock data will be stored in the Memory IC (latest Lock data only). Note: 1. Lock data will be kept after the AC Cord is unplugged. 2. When 1 to 4 listed in Lock code occurs for the first time, the VCR does not go into VCR shut-off condition.
  • Page 8 Note: 1. After replacing the Cylinder Unit, press COUNTER RESET button on remote in this mode. Total elapsed "Cylinder rotation" time (in hours) will be cleared to 0. 2. To release from Usage Screen Mode, press any operation button on VCR or insert a cassette tape in this mode. The VCR will return to normal operation mode.
  • Page 9 4.1.4.1.3. Service Position (2-2) (Wide Frame Model) Fig. 3-2-2 Note: 1. It is possible that the S-Tab SW. may not work correctly in Service Position (2-1), (2-2). (Recording can not be done). In this case, short the S-Tab SW. Pins on the foil side of the Main C.B.A. to turn this SW.
  • Page 10 2. Place the tape between the Cassette Up Ass’y and Main C.B.A. to get a stability. 3. When disassembling/assembling, refer to "CABINET SECTION" in DISASSEMBLY/ASSEMBLY PROCEDURES. Fig. 3-4 4.1.5. HOT CIRCUIT Primary circuit exists on the Main C.B.A. This circuit is identified as "HOT" on the C.B.A. and in the Service Manual. Use extreme care to prevent accidental shock when servicing.
  • Page 11 The power comes on and the unit goes into service mode. In this mode, Mechanism movement can be confirmed. When removing Cassette Up Ass’y, it can be confirmed without a cassette. To release from this mode, press POWER button off or disconnect AC Plug. 4.1.7.
  • Page 12 4.1.9. METHOD FOR LOADING/UNLOADING OF MECHANISM 4.1.9.1. (Manual Method) Turn the Loading Gear clockwise (for loading) or counterclockwise (for unloading) using needlenose pliers etc. Note: Do not use this method if Mechanism is jammed or locked. Fig. 6-1 4.1.9.2. (Electrical Method) Apply +10.0 V DC Power Supply to the Loading Motor terminals.
  • Page 13 Otherwise, the Loading Motor Drive IC (IC2501) may be damaged. Fig. 6-2 When loading without a cassette, push Portion "a" on the Holder Unit of Cassette Up Ass’y so that the Lever clear the First Tab and Second Tab. Fig. 6-3 4.1.10.
  • Page 14 Method -1: 1. Move the Pinch Roller Unit out by unhooking the Pin of Pinch Arm Unit so that the Pinch Roller is separated from the Capstan Rotor Unit shaft. Fig. 7-2 2. Remove the tape from the tape path. 3.
  • Page 15 Method -2: 1. Rotate Loading Motor counterclockwise with needlenose pliers, etc. so that the Pinch Roller is separated from the shaft of the Capstan Rotor Unit. 2. Perform Step 2 through Step 7 of Method -1. Method -3: 1. Perform Step 2 through Step 7 of Method -1. Note: After repairing mechanical trouble, make sure that all gear alignments are correct, especially the Wiper Arm Unit and Drive...
  • Page 16 4. Rewind the tape into the cassette by turning the Center Clutch Unit counterclockwise. 5. Eject the cassette by applying +10.0 V DC Power Supply again. 4.1.11. BLACK SCREWS ON THE CHASSIS Black Screws are used on the Mechanism Chassis to identify screws that require adjustment. 4.1.12.

  • Page 17: Disassembly/Assembly Procedures

    "ELECTROSTATICALLY SENSITIVE (ES) DEVICES" section of this service manual. 5. DISASSEMBLY/ASSEMBLY PROCEDURES 5.1. CABINET SECTION 5.1.1. Disassembly Method...
  • Page 18 5.1.2. Notes in chart 1. Installation of Top Cover Install the Top Cover front portion at a downward angle so that the tab on the Front Panel Ass’y fits into the hole in the Top Cover. Then, lower the rear portion into place and tighten 2 Screws (447). 2.
  • Page 19 CAUTION: Opener Lever may be damaged when Front Panel Ass’y is installed, with Cassette Door-Lid of Front Panel Ass’y and Opener Lever of Cassette Up Ass’y set incorrectly. A. When installing the Front Panel Ass’y, swing the Cassette Door- Lid all the way open until the Cassette Door tab clears the Opener Lever.
  • Page 20 B. Install the Mechanism Chassis and Cassette Up Ass’y straight onto the Main C.B.A. so that the Sensor LED clears the hole in the Mechanism Chassis and that 2 Connectors (P4001, P6201) are aligned and seated securely. 5. Flat Cable solder points on the Cylinder and AC Head Solder the Flat Cables.
  • Page 21 EJECT Position. C. Hook Spring to the Drive Rack Arm on the Mechanism Chassis. 5.2. MECHANISM SECTION 5.2.1. Disassembly/Reassembly Method 5.2.2. Inner Parts Location Fig. J1-1...
  • Page 22 5.2.3. EJECT Position Confirmation Fig. J1-2...
  • Page 23 5.2.4. Full Erase Head and Cylinder Unit Fig. J2 5.2.4.1. Reassembly Notes 1. After replacing the Cylinder Unit, clear the Total elapsed "Cylinder rotation" time (in hours) to 0. Refer to "USAGE SCREEN MODE" in...
  • Page 24 SERVICE NOTES. 5.2.5. Capstan Belt, Support Angle, Intermediate Gear B, and Main Cam Gear Fig. J3-1 5.2.5.1. Reassembly Notes 1. Alignment of Main Cam Gear, Drive Rack Arm, and Main Rod A. Confirm that the hole on Main Rod is a Through Hole with a hole on chassis.
  • Page 25 2. Confirmation/Alignment of Intermediate Gear B, Main Cam Gear, and Intermediate Gear A A. Confirm that the Hole A on Lift Gear is a Through Hole with a hole on chassis. B. Confirm that the hole on Intermediate Gear A is aligned with the hole on Lift Gear.
  • Page 26 Hole with Hole A on Support Angle in EJECT mode. The each mode Hole on Main Cam Gear should be a Through Hole with Hole B on Support Angle in each mode. Fig. J3-5 4. Main Cam Gear Kit A. Main Cam Gear is supplied as a Main Cam Gear Kit only (Kit No.
  • Page 27 Fig. J4-1 5.2.6.1. Reassembly Notes 1. Installation of Center Clutch Unit A. Fit the Center Clutch Unit into the Changing Gear. Fig. J4-2 5.2.7. Reel Gear, Main Rod, and SS Brake Arm Unit Fig. J5-1...
  • Page 28 5.2.7.1. Reassembly Notes 1. Alignment of Main Rod and T Loading Arm Unit A. Align the Gear on T Loading Arm Unit with Gear of Main Rod. Confirm that the Hole on Main Rod is a Through Hole with a hole on chassis.
  • Page 29 5.2.9. T Loading Arm Unit and S Loading Arm Unit Fig. J7-1 5.2.9.1. Reassembly Notes 1. Alignment of T Loading Arm Unit and S Loading Arm Unit A. Install the S Loading Arm Unit onto the chassis. B. Install the T Loading Arm Unit so that the hole on T Loading Arm Unit is aligned with the hole on S Loading Arm Unit.
  • Page 30 5.2.10. T Brake Unit, Tension Control Arm Unit, T Reel Table, S Reel Table, and Tension Arm Unit Fig. J8-1 5.2.10.1. Reassembly Notes 1. How to distinguish between S Reel Table and T Reel Table Fig. J8-2...
  • Page 31 5.2.11. Loading Post Base -T Unit and Loading Post Base -S Unit Fig. J9 5.2.12. Opener Piece, Drive Rack Arm, Pinch Arm Unit, P5 Arm Unit, and Intermediate Gear A Fig. J10-1...
  • Page 32 Note: In early units, a washer is used. When servicing the washer or the P5 Arm Unit, replace only the P5 Arm Unit with a new one, and remove the washer. 5.2.12.1. Reassembly Notes 1. Installation/Alignment of Intermediate Gear A, Lift Gear and P5 Arm Unit A.
  • Page 33 5.2.13. Motor Block Unit, Audio Control Head Unit, Lift Gear, Tension Arm Boss, and Cleaner Arm Unit Fig. J11 5.3. CASSETTE UP ASSEMBLY SECTION How to read chart shown above: A: Order of Procedure steps. When reassembling, perform steps(s) in reverse order. These numbers are also used as the identification (location) No.
  • Page 34 replacing each Parts. 5.3.1. Top Plate, Wiper Arm Unit, and Holder Unit Fig. K1-1 5.3.1.1. Reassembly Notes 1. Alignment of Wiper Arm Unit and Drive Rack Unit A. Slide the Drive Rack Unit to the far right as indicated by the arrow.
  • Page 35 2. Installation of Holder Unit A. Turn the Wiper Arm Unit so that the grooves on each end are aligned with the each groove on Side Plate L and R. B. Insert Holder Unit boss (A) and (B) into the grooves as shown in Fig.

  • Page 36: Adjustment Procedures

    5.3.2. Opener Lever and Drive Rack Unit Fig. K2 6. ADJUSTMENT PROCEDURES 6.1. SERVICE FIXTURES AND TOOLS 6.2. MECHANICAL ADJUSTMENT 6.2.1. CLEANING PROCEDURE FOR THE UPPER CYLINDER UNIT 1. While slowly turning the Upper Cylinder Unit counterclockwise by hand, gently rub the Video Heads with a Head Cleaning Stick (VFK27) moistened with Ethanol.
  • Page 37 Note: 1. Do not rub vertically or apply excess pressure to the Video Heads. Do not turn the Upper Cylinder Unit clockwise while cleaning. 2. After cleaning, use a Dry Head Cleaning Stick (VFK27) to remove any Ethanol remaining on the cylinder tape path. Otherwise, tape damage will occur.
  • Page 38 3. If the reading is out of specification, make sure that there is no dust or foreign material between the Brake Pad of Tension Control Arm Unit and the S Reel Table. After cleaning, the reading of tension measurement is still out of specification, replace the Tension Arm Unit and the Tension Control Arm Unit.
  • Page 39 VHS Alignment Tape (VFMS0003H6) Post Adjustment Driver (VFK0329) H-Position Adjustment Driver (VFK0330) 6.2.2.2.1. ENVELOPE OUTPUT ADJUSTMENT The height of the P2 and P3 Posts replacement part is preadjust at the factory. Purpose: To achieve a satisfactory picture and secure precise tracking. Symptom of Misadjustment: If the envelope is output poorly, much noise will appear in the picture.
  • Page 40 2. Press the Tracking Control Up or Down button on remote control. Make sure that the envelope waveform remains flat. If not, readjust P2 and/or P3 post heights. Fig. M3-1 Fig. M3-2 7. After adjustment, confirm that the tape travels without curling at P2 and P3 posts.
  • Page 41 1. Play back a T120 cassette tape and check that the tape travels smoothly between the upper and lower guides of the P4 post. 2. If necessary, adjust Black Screw (B) clockwise until the tape begins to curl at the lower edge of the P4 post. Then adjust the screw counterclockwise until the curling is eliminated.
  • Page 42 6.2.2.2.4. AUDIO CONTROL HEAD AZIMUTH ADJUSTMENT Purpose: To adjust the position and height of the Audio Control Head so that it meets the tape tracks properly. Symptom of Misadjustment: If the position of the Audio Control Head is not properly adjusted, the Audio S/N Ratio is poor.
  • Page 43 If the Horizontal Position of the Audio Control Head is not properly adjusted, a maximum envelope cannot be obtained at the Neutral Position of the Tracking Control Circuit. 1. Insert the alignment tape. 2. Press and hold FF button and CH DOWN buttons on VCR together over 5 seconds in power off condition.
  • Page 44 adjusted by using " On Screen Display " and the remote control instead of adjusting mechanical controls (VR). 6.3.2. TEST EQUIPMENT To do all of these electrical adjustments, the following equipment is required. 1. Dual-Trace Oscilloscope Voltage Range: 0.001 V to 50 V/Div. Frequency Range: DC to 50 MHz Probes: 10:1, 1:1 2.
  • Page 45 T = 6 H±0.5 H (0.38 ms±0.03 ms) Mode : SP Playback Equipment : Oscilloscope, VHS Alignment Tape (VFMS0003H6), TV monitor 1. Insert the VHS Alignment Tape. Then turn off the power. Enter service mode by pressing and holding FF and CH DOWN buttons on VCR together for more than 5 seconds in power off condition.
  • Page 46 5. After adjustment is completed, press REC button on the remote control. Then " COMP " will appear on the TV monitor and adjusted value will be written to Memory IC (IC6005). Fig.E2-3 6. Press STOP button on the remote control to release from EVR PG SHIFTER ADJUSTMENT MODE.

  • Page 47: Schematic Diagrams

    7.2. MAIN SCHEMATIC DIAGRAMS 7.3. INTERCONNECTION SCHEMATIC DIAGRAM 7.4. SIGNAL WAVEFORMS 8. CIRCUIT BOARD LAYOUT 8.1. MAIN C.B.A. 9. BLOCK DIAGRAMS 9.1. OVERALL BLOCK DIAGRAM (Model: NV-SJ4130PN) 9.2. OVERALL BLOCK DIAGRAM (Model: NV-FJ6130PN) 10. EXPLODED VIEWS 10.1. MECHANISM (TOP) SECTION...
  • Page 48 10.2. MECHANISM (BOTTOM) SECTION...
  • Page 49 10.3. CASSETTE UP COMPARTMENT SECTION...
  • Page 50 10.4. CHASSIS FRAME AND CASING PARTS SECTION...
  • Page 51 10.5. PACKING PARTS AND ACCESSORIES SECTION...

  • Page 52: Replacement Parts Lists

    11. REPLACEMENT PARTS LISTS BEFORE REPLACING PARTS, READ THE FOLLOWING: 11.1. REPLACEMENT NOTES 11.1.1. General Notes 1. Use only original replacement parts: To maintain original function and reliability of repaired units, use...

  • Page 53: Special Note

    only original replacement parts which are listed with their part numbers in the parts list. 2. IMPORTANT SAFETY NOTICE Components identified by the sign have special characteristics important for safety. When replacing any of these components, use only the specified parts. 3.
  • Page 54 When servicing the washer or the P5 Arm Unit, replace only the P5 Arm Unit with a new one, and remove the washer. 4. Main Cam Gear is supplied as a Main Cam Gear Kit (Ref. No. 8) only. Main Cam Gear Kit consists of a Main Cam Gear and a Main Cam Push Nut.
  • Page 55 Wirewound Flameproof C.B.A.: Circuit Board Assembly P.C.B.: Printed Circuit Board E.S.D.: Electrostatically Sensitive Devices 3. When replacing 0 resistor, a wire can be substituted for it. 4. Since the UHF/VHF TUNER/TV DEMODULATOR UNIT (Ref. No. 743) has already been pre-adjusted at the factory, do not try to adjust the UHF/VHF TUNER/TV DEMODULATOR UNIT.
  • Page 56 11.2. MECHANICAL REPLACEMENT PARTS LIST MECHANICAL REPLACEMENT PARTS...
  • Page 57 Ref. No. Part No. Part Name & Description Remarks VBSS0033 FULL ERASE HEAD LSXK0094 MOTOR BLOCK UNIT LSDB0045 TENSION ARM BOSS LSXY0278 MECHANICAL CHASSIS SUB ASS'Y ( A ) LSXY0279 MECHANICAL CHASSIS SUB ASS'Y ( B ) LSMD0209 OPENER PIECE VVGS0009 MAIN CAM GEAR KIT LSDR0004...
  • Page 58 Ref. No. Part No. Part Name & Description Remarks LSXL0081 SS BRAKE ARM UNIT LSMB0196 SS BRAKE SPRING VXYS1347 CASSETTE UP ASS'Y LSMA0352 TOP PLATE LSMD0174 SIDE PLATE L LSMD0173 SIDE PLATE R LSMB0218 SUPPORT SPRING LSML0096 OPENER LEVER VXLS1111 DRIVE RACK UNIT VXAS4423 HOLDER UNIT...

  • Page 59: Integrated Circuits

    Ref. No. Part No. Part Name & Description Remarks EYF52BC FUSE HOLDER LSEP2006GA MAIN C.B.A. ( A ) 4 RTL LSEP2006HA MAIN C.B.A. ( B ) 4 RTL SERVICE FIXTURES AND TOOLS Ref. No. Part No. Part Name & Description Remarks VFMS0003H6 VHS ALIGNMENT TAPE...
  • Page 60 Ref. No. Part No. Part Name & Description Remarks IC1001 0N3131-R.KT IC, LINEAR IC1001 PS2501-1-X IC, LINEAR IC1001 0N3131-S.KT IC, LINEAR IC1002 TA76431ASTP6 IC, LINEAR IC1002 C0DAEMZ00001 IC, LINEAR IC3001 NN13400A IC, LINEAR IC3101 MN3885S IC, LINEAR IC4151 C0JBAR000292 IC, CMOS STANDARD LOGIC ( A ) E.S.D.
  • Page 61 Ref. No. Part No. Part Name & Description Remarks Q4151 MUN5212T1 TRANSISTOR SI NPN CHIP ( A ) Q6001 2SD1819A-RS TRANSISTOR SI NPN CHIP Q6001 B1ABCF000020 TRANSISTOR SI NPN CHIP Q6002 2SB709A-RS TRANSISTOR SI PNP CHIP Q6002 B1ADCF000001 TRANSISTOR SI PNP CHIP Q6003 2SD1819A-RS TRANSISTOR SI NPN CHIP...
  • Page 62 Ref. No. Part No. Part Name & Description Remarks D3007 MAZ40510MF DIODE ZENER 5.1V D3007 HZS5C2TD DIODE ZENER 5.1V D3007 HZS5C3TD DIODE ZENER 5.1V D4209 MA2C165001VT DIODE SI ( B ) D4209 B0AACK000004 DIODE SI ( B ) D4209 1SS119 DIODE SI ( B ) D6001 VEKS5708...
  • Page 63 Ref. No. Part No. Part Name & Description Remarks R3034 ERJ6GEYJ121V MGF CHIP 1/10W 120 R3035 ERJ6GEYJ103V MGF CHIP 1/10W 10K R3036 ERJ6GEYJ122V MGF CHIP 1/10W 1.2K R3041 ERJ6GEYJ750V MGF CHIP 1/10W 75 R3301 ERJ6GEYJ102V MGF CHIP 1/10W 1K R3302 ERJ6GEYJ392V MGF CHIP 1/10W 3.9K R3305 ERJ6GEYJ152V MGF CHIP 1/10W 1.5K...
  • Page 64 Ref. No. Part No. Part Name & Description Remarks R4226 ERJ6GEYJ152V MGF CHIP 1/10W 1.5K ( B ) R4228 ERJ6GEYJ103V MGF CHIP 1/10W 10K ( B ) R4453 ERJ6GEYJ333V MGF CHIP 1/10W 33K ( B ) R4455 ERJ6GEYJ152V MGF CHIP 1/10W 1.5K ( B ) R6001 ERDS2TJ101 CARBON 1/4W 100...
  • Page 65 Ref. No. Part No. Part Name & Description Remarks R6236 ERJ6GEYJ562V MGF CHIP 1/10W 5.6K R6237 ERJ6GEYJ562V MGF CHIP 1/10W 5.6K R6238 ERJ6GEYJ562V MGF CHIP 1/10W 5.6K R6239 ERJ6GEYJ562V MGF CHIP 1/10W 5.6K R6301 ERJ6GEYJ121V MGF CHIP 1/10W 120 R6302 ERDS2TJ3R3 CARBON 1/4W 3.3 R6303...
  • Page 66 Ref. No. Part No. Part Name & Description Remarks C1018 ECJ2VB1E104K C CHIP 25V 0.1UF C1019 ECA0JM471 ELECTROLYTIC 6.3V 470UF C1027 ECKATS103MF CERAMIC 250V 0.01UF C1027 ECKETS103MF CERAMIC 125V 0.01UF C1027 VCKST3G103MY CERAMIC 250V 0.01UF C1027 VCKSU3D103MY CERAMIC 125V 0.01UF C1029 ECJ2VC1H101J C CHIP 50V 100PF C1030...
  • Page 67 Ref. No. Part No. Part Name & Description Remarks C3062 ECJ2VF1E104Z C CHIP 25V 0.1UF C3101 ECEA1HKA010 ELECTROLYTIC 50V 1UF C3102 ECJ2VF1E104Z C CHIP 25V 0.1UF C3104 ECJ2VF1H103Z C CHIP 50V 0.01UF C3105 ECJ2VF1H103Z C CHIP 50V 0.01UF C3106 ECJ2VF1H103Z C CHIP 50V 0.01UF C3108 ECJ2VB1H102K C CHIP 50V 1000PF...
  • Page 68 Ref. No. Part No. Part Name & Description Remarks C4205 ECEA1CKA100 ELECTROLYTIC 16V 10UF ( B ) C4206 ECEA1CKA100 ELECTROLYTIC 16V 10UF ( B ) C4207 ECEA1CKA100 ELECTROLYTIC 16V 10UF ( B ) C4208 ECEA1CKA100 ELECTROLYTIC 16V 10UF ( B ) C4209 ECEA1CKA100 ELECTROLYTIC 16V 10UF ( B )

  • Page 69: Crystal Oscillator

    Ref. No. Part No. Part Name & Description Remarks C6231 ECEA0JKA101 ELECTROLYTIC 6.3V 100UF C6232 ECA1HM470I ELECTROLYTIC 50V 47UF C6233 ECEA1CKA470 ELECTROLYTIC 16V 47UF C6302 ECJ2VF1E104Z C CHIP 25V 0.1UF C6303 ECJ2VF1E104Z C CHIP 25V 0.1UF C6304 VCESAM0J331I ELECTROLYTIC 6.3V 330UF C6307 ECEA0JKA101 ELECTROLYTIC 6.3V 100UF...
  • Page 70 Ref. No. Part No. Part Name & Description Remarks P3501 LSJWM6N050LL CONNECTOR CABLE W/PLUG,DC 9V ( A ) P3501 LSJWM9N050LL CONNECTOR CABLE W/PLUG,DC 9V ( B ) P3502 LSEK0407 SHIELD PLATE UNIT P4001 VJSS0888 FE CONNECTOR 2P P4002 LSJWM6N130LL CONNECTOR CABLE W/PLUG,DC 9V P6201 K1KA12A00234 CONNECTOR 12P...
  • Page 71 Ref. No. Part No. Part Name & Description Remarks JK3001 LSJH0028 AUDIO/VIDEO JACK SOCKET ( A ) JK3001 K2HA608B0002 Hi-Fi AUDIO/VIDEO JACK SOCKET ( B ) JK3002 K2HA104B0007 FRONT AUDIO/VIDEO JACK SOCKET ( A ) JK3002 K2HA306B0058 FRONT AUDIO/VIDEO JACK SOCKET ( B ) MISCELLANEOUS Ref.
  • Page 72 The Number of pins of the Connector. POWER SUPPLY NV-FJ6130PN C.B.A. ----- MAIN C.B.A. Not used P1503 P3004 (10 Pins) Note : Refer to item 3 of Schematic Diagram Notes for mark "PT". Connector No. on Main C.B.A. NV-SJ4130PN, NV-FJ6130PN...
  • Page 73 L6201 C6231 R6232 CYLINDER PG/FG OUTPUT TP6008 100U 100/6.3V 6800 CYLINDER SPEED CONTROL NV-SJ4130PN, NV-FJ6130PN R6233 CAPSTAN MOTOR SPEED CONTROL VCC(14V) FOR CYLINDER & LODING MOTOR SIGNAL GND MAIN I (SYSTEM CONTROL/ LODING MOTOR CONTROL REVERSE(L)/STOP(M)/FORWARD(H) C6233 47/16V TO M V...
  • Page 74 POS.3 MODE SW POSITION C (Not used) I POS.2 MODE SW POSITION B CV_OUT VIDEO POS.1 MODE SW POSITION A OSD_VSS ROTARY SW CV_IN VIDEO HAMP HEAD AMP SW CV_IN2 V-SYNC DENV ENVELOPE DET NV-SJ4130PN, NV-FJ6130PN I/O CHART OF IC6001...
  • Page 75 1K C,D C7024 C4013 L7003 10/16V R4009 C4017 100U 0.01 C4015 R4013 J4103 L4002 HIFI_NOR_IN TO M IV 100U LSJB2006 NV-SJ4130PN, NV-FJ6130PN MAIN II (SIGNAL PROCESS/ AUDIO) FULL ERASE FULL ERASE HEAD UNIT HEAD UNIT SCHEMATIC DIAGRAM AUDIO CONTROL HEAD C.B.A.
  • Page 76 COLOR KILLER 629KHz DETECTOR 1/40 COMB CHROMA LP/SLP FREQUENCY 4Phase PHASE Trap COMB select COMPENSATOR Busrst up/down LP/SLP ROTARY Side 4.8MHz 3.58MHz COMPOSITE Lock TRAP LP/SLP COMPONENT SP/LP 2FSC COMPONENT PB AMP -OFF COMPOSITE NV-SJ4130PN, NV-FJ6130PN IC3001 DETAIL BLOCK DIAGRAM...
  • Page 77 SW6315 CH DOWN CH DOWN SW6316 STOP/EJECT R6320 SW6313 SW6305 SW6302 3900 EVQ11A09K EVQ11A09K EVQ11A09K SW6317 CH UP CH UP SW6318 R6321 SW6314 R6315 SW6306 EVQ11A09K EVQ11A09K SW6319 LSJB2006 TO M V UNSW_5V_SYSCON NV-SJ4130PN, NV-FJ6130PN MAIN III (OPERATION) SCHEMATIC DIAGRAM...
  • Page 78 OF MODELS & MARKS Do not use the part number on this diagram. REFER TO BEGINNING OF SCHEMATIC SECTION. MODEL MARK ----- REC AUDIO SIGNAL PB AUDIO SIGNAL NV-SJ4130PN NV-FJ6130PN ----- Not used J4201 C4921 C4229 R4227 0.01...
  • Page 79 2200 TP1009 SW_5V_VIDEO TO M I,M II,M IV,M VI VOLTAGE DET C1055 R1057 IC1002 TA76431AS TP1007 V-REF(2.495V) R1058 C1059 C1057 C1058 SHUNT TP1006 100K 22/16V 100/6.3V REGULATOR TO M III LED_5V LSJB2006 NV-SJ4130PN, NV-FJ6130PN MAIN V (POWER SUPPLY) SCHEMATIC DIAGRAM...
  • Page 80 DELAY SEPARATION COMMERCIAL H-MASK ADVANCE PROCESS V-MASK WIDTH WIDTH CONTROL CONTROL BLACK AUDIO AUDIO COUN C3812 C3810 DETECTOR LATCH ENVELOPE DETECTOR 1000P VIDEO DETECT AUDIO DC R3807 TP3804 TP3801 TP3803 TP3807 NV-SJ4130PN, NV-FJ6130PN LSJB2006 MAIN VI (ADVANCE) SCHEMATIC DIAGRAM (D)
  • Page 81 (9 Pins) AUDIO IN 1 L-CH C, D AUDIO P3502 INFRARED OUT R-CH RECEIVER AUDIO UNIT IN 1 R-CH FRAME VIDEO IN 2 AUDIO IN 2 L-CH C, D AC120V AC CORD AUDIO IN 2 R-CH NV-SJ4130PN, NV-FJ6130PN INTERCONNECTION SCHEMATIC DIAGRAM...

  • Page 82: Main Schematic Diagrams

    NV-SJ4130PN / NV-FJ6130PN 7.2. MAIN SCHEMATIC DIAGRAMS MAIN I (SYSTEM CONTROL/ SERVO) SCHEMATIC DIAGRAM B, C KEY VOLTAGE CHART (SW6301, 6303, 6304, 6305, 6307, 6312, 6313, 6314, 6316) KEY VOLTAGE CHART (SW6303, 6304, 6305, 6310, 631 TERMINAL TERMINAL 0.6V 0.7V 1.9V...
  • Page 83 L6201 C6231 R6232 CYLINDER PG/FG OUTPUT TP6008 100U 100/6.3V 6800 CYLINDER SPEED CONTROL NV-SJ4130PN, NV-FJ6130PN R6233 CAPSTAN MOTOR SPEED CONTROL VCC(14V) FOR CYLINDER & LODING MOTOR SIGNAL GND MAIN I (SYSTEM CONTROL/ LODING MOTOR CONTROL REVERSE(L)/STOP(M)/FORWARD(H) C6233 47/16V SERVO) SCHEMATIC DIAGRAM...
  • Page 84 NV-SJ4130PN / NV-FJ6130PN MAIN II (SIGNAL PROCESS/AUDIO) SCHEMATIC DIAGRAM REC VIDEO SIGNAL PB VIDEO SIGNAL REC AUDIO SIGNAL PB AUDIO SIGNAL CAPSTAN SERVO L3016 R3019 R3020 L3101 100U C3109 R3025 R3026 100/6.3V FL3001 TP3010 C3105 0.01 TO M I AT_ENV...
  • Page 85 R3213 R3038 (BUFFER) 6800 R3212 C3221 W/ 2HD U7001 UHF/VHF TUNER/TV DEMODULATOR UNIT ENG56717G1 L7001 L7002 C7010 C7001 1000P R7004 100/6.3V C7020 C7024 L7003 100U R4013 HIFI_NOR_IN TO M IV LSJB2006 NV-SJ4130PN, NV-FJ6130PN MAIN II (SIGNAL PROCESS/ AUDIO) SCHEMATIC DIAGRAM...
  • Page 86 NV-SJ4130PN / NV-FJ6130PN MAIN III (OPERATION) SCHEMATIC DIAGRAM U6301 LSSZ0001 (DISPLAY TUBE UNIT) TYPE 01-A LED TIMER Hi-Fi W/TYPE 01-A LED Q6603 (SWITCHING) R6677 R6678 R6676 R6679 Q6602 (SWITCHING) R6675 R6680 R6674 R6681 Q6601 (SWITCHING) C6620 IC6601 R6673 R6682 C6621...
  • Page 87 CH DOWN EVQ11A09K 3900 EVQ11A09K 3900 EVQ11A09K 3900 EVQ11A09K SW6316 STOP/EJECT R6320 SW6313 SW6305 SW6302 3900 EVQ11A09K EVQ11A09K EVQ11A09K SW6317 CH UP CH UP SW6318 R6321 SW6314 R6315 SW6306 EVQ11A09K EVQ11A09K SW6319 LSJB2006 NV-SJ4130PN, NV-FJ6130PN MAIN III (OPERATION) SCHEMATIC DIAGRAM...
  • Page 88 MAIN IV (Hi-Fi) SCHEMATIC DIAGRAM (C,D) REC AUDIO SIGNAL PB AUDIO SIGNAL J4201 C4921 R4901 PT R4902 PT C4902 2R2/50V C4903 3R3/50V L4901 C4914 R4903 C4915 PT C4916 PT C4917 0.1 WF33 MTS/SA C4918 SIGNAL C4919 PROCE TP4202 C4226 R4214 C4920 0.022 R4210 1K...
  • Page 89 NV-SJ4130PN / NV-FJ6130PN NOTE: NOTE: For placing a purchase order of the parts, COMPARISON CHART FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, be sure to use the part number listed in the parts list. OF MODELS & MARKS REFER TO BEGINNING OF SCHEMATIC SECTION.
  • Page 90 NV-SJ4130PN / NV-FJ6130PN MAIN V (POWER SUPPLY) SCHEMATIC DIAGRAM IMPORTANT SAFETY NOTICE: CAUTION: FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, COMPONENTS IDENTIFIED BY THE SIGN HAVE REPLACE ONLY WITH THE SAME TYPE 1.6A 125/250V FUSE. SPECIAL CHARACTERISTICS IMPORTANT FOR SAFETY. ATTENTION: POUR UNE PROTECTION CONTINUE LES RISQUES WHEN REPLACING ANY OF THESE COMPONENTS, D’T INCENDIE N’I UTILISERQUE DES FUSIBLE DE MÉME...
  • Page 91 R1016 2200 TP1009 TO M I,M II,M IV,M VI SW_5V_VIDEO VOLTAGE DET C1055 R1057 IC1002 TA76431AS TP1007 R1058 C1059 C1057 C1058 SHUNT TP1006 100K 22/16V 100/6.3V REGULATOR TO M III LED_5V LSJB2006 NV-SJ4130PN, NV-FJ6130PN MAIN V (POWER SUPPLY) SCHEMATIC DIAGRAM...
  • Page 92 MAIN VI (ADVANCE) SCHEMATIC DIAGRAM (D) REC VIDEO SIGNAL PB VIDEO SIGNAL REC AUDIO SIGNAL PB AUDIO SIGNAL TP3806 TP3802 L3801 100U TO M V SW_5V_VIDEO C3801 C3802 R3821 R3815 100/6.3V 0.01 R3814 R3813 R3822 R3812 100K 100K L3802 C3816 C3830 0.15 0.056...
  • Page 93 NV-SJ4130PN / NV-FJ6130PN NOTE: NOTE: For placing a purchase order of the parts, COMPARISON CHART FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, be sure to use the part number listed in the parts list. OF MODELS & MARKS REFER TO BEGINNING OF SCHEMATIC SECTION.

  • Page 94: Interconnection Schematic Diagram

    NV-SJ4130PN / NV-FJ6130PN 7.3. INTERCONNECTION SCHEMATIC DIAGRAM INTERCONNECTION SCHEMATIC DIAGRAM MAIN C.B.A. FULL ERASE HEAD UNIT P6201 UHF/VHF P4001 TUNER/TV (2 Pins) DEMODULATOR UNIT UHF/VHF UHF/VHF AUDIO CONTROL HEAD UNIT P4092 P4002 23 Pins P4002 (6 Pins) VIDEO VIDEO IN 1...
  • Page 95 (12 Pins) (2 Pins) R/TV DULATOR F/VHF F/VHF CYLINDER UNIT 23 Pins (7 Pins) UPPER CYLINDER UNIT P3501 A, B (6 Pins) P3501 C, D (9 Pins) P3502 NFRARED RECEIVER UNIT FRAME AC120V AC CORD NV-SJ4130PN, NV-FJ6130PN INTERCONNECTION SCHEMATIC DIAGRAM...
  • Page 98 • Reajuste del idioma, canales, reloj y canal de salida del VCR • DST (Ajuste de la hora veraniega) • Información en Pantalla (OSD) • Funciones especiales del VCR • Copia de cassette (Doblaje) • Antes de solicitar soporte técnico...
  • Page 99 • Funcionamiento del cassette INDICE INDICE INDICE INDICE • Sistema de emisión MTS • VHS Hi-Fi estéreo • Conexiones avanzadas • Función de control de multi-marca...
  • Page 100 PIN 26 OF IC3001 CH2 TP6205 CH2 TP6205 0.1V 5ms 1 20µs1 20mV 0.5ms1 0.1V 5ms 2 0.1V 5ms 2 WF13 WAVE FORM NV-SJ4130PN, NV-FJ6130PN CH1 WF17 (A, B) CH1 WF17 (C, D) CH2 WF21 (A, B) CH2 WF21 (C, D)
  • Page 101 WF22 WF36 WF31 (C, D) +4.76Vp-p +3.80Vp-p +5.00Vp-p +10Vp-p TP6204 REC/PB PIN 3 OF IC6001 REC/PB PIN 27 OF IC4201 PIN 5 OF T1001 POWER ON 0.5ms1 0.5s1 10ms1 2µs1 WF23 WAVE FORM NV-SJ4130PN, NV-FJ6130PN WF20 WF27 WF32 (C, D)
  • Page 102 CIRCUIT BOARD LAYOUT SHOWS COMPONENTS INSTALLED FOR VARIOUS MODELS. REPLACE ONLY WITH THE SAME TYPE 1.6A 125/250V FUSE. FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, NV-SJ4130PN ATTENTION: POUR UNE PROTECTION CONTINUE LES RISQUES SPECIAL CHARACTERISTICS IMPORTANT FOR SAFETY. FOR PROPER PARTS CONTENT FOR THE MODEL YOU ARE SERVICING, REFER TO BEGINNING OF SCHEMATIC SECTION.
  • Page 103 LED ON(H) LED DRIVE TAKEUP PHOTO TR TAKEUP PHOTO TR(L) (WITH LED DISPLAY) Q6009 SUPPLY PHOTO TR SUPPLY PHOTO TR(L) KEY DATA KEY SWITCH KEY DATA SEFETY TAB BROKEN(H) NV-SJ4130PN SW6001 IR DATA IR RECEIVER SAFETY TAB SW OVERALL BLOCK DIAGRAM...
  • Page 104 OVERALL BLOCK DIAGRAM REC VIDEO SIGNAL PB VIDEO SIGNAL REC AUDIO SIGNAL PB AUDIO SIGNAL MAIN C.B.A. CYLINDER UNIT P3501 VIDEO SP L HEAD IC3001 (VIDEO/AUDIO PROCESS / HEAD AMP) VIDEO SP R HEAD TUNER VIDEO VIDEO LP/SLP L HEAD VIDEO SIGNAL PROCESS HEAD AMP VIDEO IN2...

This manual is also suitable for:

Nv-fj6130pn

Table of Contents