Page 1
Self Diagnosis Supported model HISTORY INFORMATION FOR THE FOLLOWING MANUAL: REPAIR MANUAL RB2T Chassis Segment: HA MODEL COMMANDER DESTINATION XBR-70X850B RM-YD102 /RMF-YD003 US/CND XBR-70X850B Version Date Subject 04/28/2014 Original Manual Release Date. LCD Digital Color TV 9-888-607-01...
Removing the Rear Cover ...................13 Checking the Accessories..................1 Replacing the Main Board and Tuner Board ..........14 Board Layout ....................2 Replacing the Power Supply Board .............17 XBR-70X850B .......................2 Replacing the Switch Unit ................18 Smart Core Block....................2 Removing the USB Assembly ..............18 Wire Dressing ....................3 Removing the Speakers ................18...
Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le NOTE: Do not modify the original design without obtaining written permission present manuel ou dans des supplements publies par Sony.
Page 4
0.5 mA (500 microamperes). Leakage current can be measured by any one of three methods. A commercial leakage tester. Follow the manufacturers’ instructions provided with the tester. A battery-operated AC milliammeter. Figure B. Checking for earth ground. XBR-70X850B...
SECTION 1 - SPECIFICATIONS AND LAYOUTS SPECIFICATIONS System Model name XBR-70X850B Television system NTSC: American TV standard Power and others ATSC (8VSB terrestrial): ATSC compliant 8VSB 110 V - 240 V AC, 50/60 Hz (U.S.A./Canada 120 V AC, 60 Hz)
Total operation time by hour (MAX:65535) Total operation time by hour (MAX:65535) *Format of Error History = YYMMDDhhmmss example 120123132522= Jan 23, 2012 13:25:22 (1:25:22PM) NOTE: date and time must be set for this to work SAMPLE SELF CHECK DIAGNOSIS PAGE XBR-70X850B...
*NOTE: REFER TO LCD PANELS SERVICE MANUAL IN REFERENCE LIBRARY DATABASE FOR CORRECT REPLACEMENT PARTS BASED ON SERIAL NUMBER. To access the most recent version of the Triage documents for the models listed in this manual, login into the Sony Authorized Service Portal at http://www.sony.com/asp.
CAMERA LED BACKLIGHTS HEADPHONES AUDIO TUNER SWITCH DEMODULATOR TUNER BOARD UNIT ADC / DACAMP VIDEO 1 CVBS OPTICAL VIDEO 2 CVBS/COMP AUDIO OUT LOCAL DIMMING TUNER BAXF SMART CORE IR RX WIFI SWITCH UNIT HSC2 POWER SUPPLY AC IN XBR-70X850B...
See Stanby High (3.3V) Power Supply Is Standby LED Power Supply LED Blinking appears Board* blinking? Board* Flowchart momentarily? Power Supply Main Board* Board* *For Part Number information, refer to “Section 4 - Exploded View/Part Number Information” on page XBR-70X850B...
See Triage Chart HEM3 Board Main Board* After a while Check ventilation Imediately LCD Panel/ TCON Power Supply Main Board* LD Board* (LCD Panel)* Board* *For Part Number information, refer to “Section 4 - Exploded View/Part Number Information” on page XBR-70X850B...
Locate Backlights CN6401 on Zero volts at Zero volts at LCD Panel* turned on? Power Supply Pin 5? Pin 3? Board. Sony logo TCON* Main Board* appears Main Board* (LCD Panel) momentarily? Unplug LVDS connector with Test patterns TCON* unit off. Turn unit...
Main Board* (LCD Panel) Any horizontal LCD Panel* lines? Any single or LCD Panel* isolated vertical lines? More than 1 TCON* vertical band? (LCD Panel) *For Part Number information, refer to “Section 4 - Exploded View/Part Number Information” on page XBR-70X850B...
Active Double images Active 3D become one/ 3D Glasses/ become one? Glasses Remote works One Touch Remote Control? Bluetooth 3D OK Board* *For Part Number information, refer to “Section 4 - Exploded View/Part Number Information” on page XBR-70X850B...
1. Place TV in a standing position on a flat surface. 2. Locate and remove all screws from the Rear Cover. 1. Locate and remove 1 screw and disconnect 1 connector from the Camera Module to lift as shown and detach from TV. XBR-70X850B...
Cover, Under Cover, Under 6. Lift the Rear Cover as shown to remove. K2, Board K2, Board 4. Locate and remove 4 screws from the Tuner Board, release the clip and lift as shown to detach. Tuner Board Tuner Board XBR-70X850B...
Page 19
11. Select the correct destination of the TV, press to increase or to detach. to decrease the data value (Use the table below for reference). Model Name Destination Data Value XBR-70X850B US/CND ATSC_UC_BASE 12. Press then to save the changes. MUTING...
Page 20
20. Enter the Serial Number of the TV. MODEL NO NOTE: If the incorrect Serial Number is entered, press RETURN XBR-70X850B to go back to the Serial Number input screen and re-enter the correct number. SERIAL NO 5000001 21. Press to save the Serial Number.
TV. POWER d. Press to exit the Self Check screen. POWER c. Wait until the Software update is complete and the TV turns OFF. 8. Cycle AC Power (Unplug and plug AC Cord from the outlet). XBR-70X850B...
Bracket, SP R as shown. USB Holder USB Holder 3. Locate the Speaker, disconnect connector and lift as shown to detach. Cable with Cable with Connector Connector (USB) (USB) 4. Refer to these instructions for removing the opposite speaker. XBR-70X850B...
3. Release the hooks to detach the Back Cover, then lift the Mic Unit to remove. Unit Unit 4. Locate and unclamp the clips from BT Module and Wireless LAN Card, then slide as shown to detach. Wireless Wireless BT Module BT Module LAN Card LAN Card XBR-70X850B...
SECTION 4 - EXPLODED VIEW/PART NUMBER INFORMATION XBR-70X850B Components not identified by a part number or description The component parts of an assembly are indicated by the reference numbers in are not stocked because they are seldom required for routine the far right column of the parts list and within the dotted lines of the diagram.
Page 25
Bracket RC* Bracket, Stand* Main Plate SmartCore Bracket RC* Bracket Stand Right* *Reinstall Bracket, RC when replacing the LCD Panel. *Reinstall Bracket, Stand Right and Left when replacing the LCD Panel. *Reinstall Bracket, Wall when replacing the LCD Panel. XBR-70X850B...
Page 26
4-487-101-01 HOLDER, HS WS 2-650-770-31 SLIDE, CLAMP 1-474-578-11 G7B BOARD, COMPLETE 4-487-094-11 SHEET, INSULATION (G7) ORDER THIS PART WHEN REPLACING THE LCD PANEL. *Reinstall Brackets, RC Up,when replacing the LCD Panel. *Reinstall Main, Plate when replacing the LCD Panel. XBR-70X850B...
(See Appendix A) Replace only with part number specified. REF. NO. PART NO. DESCRIPTION 4-474-892-01 TOP COVER A-2057-722-A HSC2, BOARD MOUNTED 4-474-888-02 BOTTOM CASE 4-480-411-01 FRONT COVER 1-492-760-12 BT MODULE 1-458-723-11 WIRELESS LAN CARD 1-458-793-11 MIC UNIT 4-480-412-01 BACK COVER XBR-70X850B...
(See Appendix A) Replace only with part number specified. DESCRIPTION XBR-70X850B Cover Under (1), Reflector SP (4), Rear Cover (3), 2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3 Smart Core (2), Bracket RC (2), Back Cover (SC) (1)
4-443-737-02 SUPPORT BELT KIT (SCREWS TO ATTACH TABLE TOP STAND TO LCD TV) For product protection and safety reasons, Sony strongly recommends that you use the screws provided with the TV. REMOTE COMMANDER CAUTION: These screws cannot be used to secure the TV PART NO.
APPENDIX A: ENCRYPTION KEY COMPONENTS Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided in the applicable agreement with Sony Corporation (and/or its subsidiary). As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced pursuant to the following: In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a .