Dell EMC SD-WAN Edge 3000 Series Activation Manual
Hide thumbs
Also See for EMC SD-WAN Edge 3000 Series:
- Installation and operation manual (67 pages) ,
- Getting started manual (28 pages) ,
- Getting started manual (28 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Dell EMC SD-WAN Edge 3000 Series
Summary of Contents for Dell EMC SD-WAN Edge 3000 Series
- Page 1 Dell EMC SD-WAN Edge 3800 Advanced Activation Guide H18672.1 February 2021...
- Page 2 Xeon D-2100 x86-based processor, which is optimized for high-performance networking. Dell EMC is the first to market with Xeon-D for SD-WAN. ● VMware SD-WAN Edge—a hardware device with VMware software preinstalled. ● VMware SD-WAN Gateway—VMware SD-WAN networks consists of gateways deployed at top tier network points-of- presence and cloud data centers around the world.
-
Page 3: Step 1. Connect The Power
If you received an email from your IT administrator, follow the instructions in the email to complete the activation of the SD-WAN Edge 3800. If you did not receive an email, request the setup instructions from your IT administrator or contact your Dell Technologies sales representative. Step 4. Connect local devices... - Page 4 Dell EMC SD-WAN Edge 3800 advanced configuration The following sections describe the optional advanced configurations that are supported and listed within the Activation Quick Start Guide that is included with the SD-WAN Edge 3800 system. Set up a static IP address 1.
- Page 5 Figure 2. Static IP address assignment 7. Click Save (upper-right of the Configuration screen) to apply the settings. 8. When prompted, type the default username admin and the default password admin and click OK. The SD-WAN Edge 3800 attempts to reach the SD-WAN Gateway address, and the icon will turn green when successful. NOTE: Based on your service provider, a VLAN ID may be required.
- Page 6 Install and configure an SFP module as WAN interface 1. Verify that the SFP module you want to install is compatible with the device. NOTE: For information about compatibility, contact your Dell Technologies Sales Representative. 2. Insert the SFP module in any SFP port. Figure 5. SFP ports NOTE: If the link lights do not illuminate, use the UI to reboot the SD-WAN Edge 3800 system.
- Page 7 Verify the SD-WAN Edge 3800 MAC address is listed on the gateway You can verify that the SD-WAN Edge 3800 MAC is seen on the gateway to confirm Layer 2 connectivity. Figure 6. MAC Address listing NOTE: Alternatively, the MAC address can be found printed on a sticker on the bottom of the SD-WAN Edge 3800. The following figure shows results of arp- n from a device on the same network segment.
- Page 8 Verify configuration string values When the SD-WAN Edge 3800 is updated before activation (for example, setting a static IP address), a configuration string is appended to the activation URL. This string is Base64 and is used to specify the static IP address during activation. http://192.168.2.1/?activation_key=1X1X-1X1X-1X1X-1X1X1&custom_vco=vco109- usca1.velocloud.net&configuration=W3siaW50ZXJmYWNlIjoiR0UzIiwicHJvdG8iOiJzdGF0aWMiLCJpcCI 6IjE0My4xNjYuODEuMjIiLCJnYXRld2F5IjoiMTQzLjE2Ni44MS4xIiwibmV0bWFzayI6IjI1NS4yNTUuMjU1LjAi...
- Page 9 A WARNING indicates a potential for property damage, personal injury, or death. © 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.