Table of Contents
Advertisement
Mounting the Router
To mount the router on a wood pole:
Step 1
Place the mounting plate on the selected mounting location on the pole.
Step 2
Mark the drilling locations on the pole through the clearance holes and remove the mounting plate.
Step 3
Drill holes completely through the pole at the points you marked in Step 2.
Step 4
Position the mounting plate over the drilled holes. Align the clearance holes on the mounting plate with the drilled holes.
Step 5
Place a standard washer against one of the clearance holes on the mounting plate and then feed the bolt through the
washer, clearance hole, and drilled hole. Push the bolt all the way through the pole. See
on page
7.
Step 6
Follow these steps on the opposite side of the pole:
a) Place a fender washer at the end of the bolt, and then a nut.
b) Hand tighten the nut.
Step 7
Repeat Step 5 and Step 6 for the second bolt.
Step 8
Use a socket wrench to evenly tighten both bolts to finish installing the mounting plate on the wooden pole (see the
following figure).
Figure 9: Mounting Plate Installed on Wooden Pole with Through Bolts
Item
Description
1
5/8-in. through bolts (2)
2
Wood pole
Install the Mounting Plate Mounting on Wood Pole (Optional)
Figure 5: Mounting Plate Details,
Mounting the Router
11
Advertisement
Table of Contents
