Installation
Attaching the Rack-Mounting Bracket and Mounting an ONT on a Rack
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to
ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the
Statement 1006
Before you begin
Make sure that you have the mounting brackets that are included with the shipping box.
Procedure
Step 1
Use the Phillips head screwdriver and attach a rack-mounting bracket to an ONT using the mounting bracket
screws. Follow the same steps to attach the second bracket to the other side.
Figure 19: Attaching Rack-Mounting Brackets to a CGP-ONT-4PVC
1
2
Step 2
Insert the ONT into the rack and align the bracket in the rack. Use the rack-mounting screws to secure the
ONT in the rack.
Warning
heaviest component at the bottom of the rack.
unit in the rack.
8xMouting-bracket screw
2xRack-mounting bracket
To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 3 in.
(7.6 cm). Statement 1076
Attaching the Rack-Mounting Bracket and Mounting an ONT on a Rack
3
Front-mounting position
Cisco Catalyst PON Series Switches Hardware Installation Guide
33