Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Pattern
37 Stitches
32
33
34
35
36
37
Stitch length dial
Depending on the selected stitch, you may need to
adjust the stitch length for best results.
The numbers marked on the stitch length dial represent
the stitch length in millimeters (mm) (1/25 inch).
THE HIGHER THE NUMBER, THE LONGER THE
STITCH. With the "0" setting, material is not fed. This is
used when sewing a button.
The "F"-"1" range is for making a satin stitch (closed
zigzag stitch), which is used for making buttonholes
and decorative stitches. The position needed for making
the satin stitch varies according to the material and
thread being used. To determine the exact dial position,
first test the stitch and length settings on a scrap piece of
fabric to observe the feeding of the material.
1 Stitch length dial
2 Shorter
3 Longer
Stitch Name
27 Stitches
27
DECORATIVE STITCH
—
DECORATIVE STITCH
—
DECORATIVE STITCH
—
LINK STITCH
—
DECORATIVE STITCH
—
DECORATIVE STITCH
1
2
Recommended
Width
(mm (inch))
6.5
(1/4)
6.5
(1/4)
6.5
(1/4)
3-6.5
(1/8-1/4)
6.5
(1/4)
6.5
(1/4)
CAUTION
●
If the stitches are bunched together,
lengthen the stitch length and continue
sewing. Do not continue sewing without
lengthening the stitch length, otherwise
the needle may break and cause injury.
Stitch width dial
Raise the needle by turning the handwheel toward you
(counterclockwise) so that the mark on the wheel points
up. The numbers marked on the dial represent the stitch
width.
3
1
1 Stitch width dial
When the Straight or Triple Stretch Stitch is selected, the
needle position can be changed from left to right by
adjusting the stitch width dial.
Recommended
Length
Reference Page
(mm (inch))
Fixed
2.5 (3/32)
Fixed
2.5 (3/32)
Fixed
2.5 (3/32)
Fixed
2.5 (3/32)
Fixed
2.5 (3/32)
Fixed
2.5 (3/32)
1
1
35
35
35
35
35
35
12
Advertisement
Table of Contents
