Related Manuals for Beko WTK104151W
Summary of Contents for Beko WTK104151W
- Page 1 Washing Machine User Manual WTK104151W Document Number : 2302061497_EN/ 28-008-20.(11:49)
- Page 2 Please read these instructions first before using your appliance Dear Customer, Thank you for choosing a Beko appliance. Please take some time to read this user manual before using your appliance, to ensure you know how to safely operate the controls and functions.
-
Page 3: General Safety Instructions
1 General safety instructions • While there is still water inside the product, never open the This section includes security loading door or remove the filter. instructions which may help prevent Otherwise, risk of flooding and the injuries and material damage risks. injury from hot water will occur. -
Page 4: Children's Safety
1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used room where the product is by children at and above 8 located. years old and by persons •... -
Page 5: Important Instructions For Environment
This product has been manufactured with DANGER high quality parts and materials which can be reused and are suitable for recycling. Do • Do not wash the product by not dispose of the waste product with normal spraying or pouring water onto domestic and other wastes at the end of its it! There is the risk of electric service life. -
Page 6: Technical Specifications
4 Technical specifications Supplier name or trademark Beko WTK104151W Model name 8780813200 Rated capacity (kg) Maximum spin speed (rpm) 1400 Built-in Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet • / - • Available Electrical input (V/Hz) -
Page 7: Appropriate Installation Location
4.1 Installation 4.1.3 Removing the transportation locks • Preparation of the location and electrical, 1 Loosen all bolts with an appropriate wrench tap water and waste water installations at until they turn freely. the place of installation is under customer's 2 Remove the transport safety bolts by responsibility. -
Page 8: Connecting The Drain Hose To The Drain
• In case the drain hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure. -
Page 9: Electrical Connection
4.1.7 Electrical connection The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need Connect the product to a grounded outlet to be replaced an ASTA approved BS1362 protected by a 13 A fuse. Our company shall fuse of the same rating must be used. -
Page 10: Sorting The Laundry
4.2 Preparation 4. Install transportation safety bolts in the reverse order of removal procedure. 4.2.1 Sorting the laundry • Sort laundry according to type of fabric, INFORMATION! colour, and degree of soiling and allowable • Never move the product without the water temperature. -
Page 11: Loading The Laundry
4.2.3 Tips for energy and water saving 4.2.6 Using detergent and softener Following information will help you use the product in an ecological and energy/water- INFORMATION efficient manner. • When using detergent, softener, starch, • Operate the product in the highest load fabric dye, bleach and descaling agents;... - Page 12 If the product is equipped with a liquid • Wash woollens at suggested programme with special detergent made specifically for detergent part: woollens • Please review the programme descriptions part for suggested programme for different textiles. • All recommendations about detergents are valid for selectable temperature range of programmes.
-
Page 13: Tips For Efficient Washing
Using bleaches • Do not pour the bleach onto the laundry. • Select a programme with prewash and add • Do not use it with the coloured items. the bleach at the beginning of the prewash. • When using an oxygen-based bleach, select Do not put detergent in the prewash a programme which washes the laundry at compartment. - Page 14 4.2.8 Displayed Programme Time You can see the programme duration on the display of your machine while selecting a programme. Depending on the amount of laundry you have loaded into your machine, foaming, unbalanced load conditions, fluctuations in power supply, water pressure and programme settings, the programme duration is automatically adjusted while the programme is running.
-
Page 15: Operating The Product
4.3 Operating the product 1 - Programme Selection Knob (Uppermost position On / Off) 4.3.1 Control panel 2 - Display 3 - End Time Adjustment Button 4 - Programme Follow-up Indicator 5 - Start/Pause Button 6 - Auxiliary Function Button 3 7 - Auxiliary Function Button 2 8 - Auxiliary Function Button 1 9 - Spin Speed Adjustment Button... - Page 16 • : Selectable * : Automatically selected, cannot be cancelled. ** : Eco 40-60 ( ) is the test programme in accordance with EN 60456:2016 and energy label with Commission Delegated Regulation (EU) 1061/2010) ***: Eco 40-60 with 40 °C temperature selection is the test programme in accordance with EN 60456:2016/prA:2019 and energy label with Commission Delegated Regulation (EU) 2019/2014 - : See the programme description for maximum load.
-
Page 17: Main Programmes
4.3.5 Main programmes • Anti Allergy Depending on the type of fabric, use the Use this programme for laundry that requires following main programmes. an intense, long, anti-allergic and hygienic washing cycle at high temperature. A high • Cottons level of hygiene is ensured thanks to the long You can wash your durable cotton laundry heating and additional rinsing step. - Page 18 Mixed Fabrics StainExpert • • You can use this programme to wash cottons and Your washing machine has a special stain synthetics together without the need to sort them. programme ensuring that different types of stains are removed in the most efficient way. Use this programme only to use durable, colourfast Shirts •...
- Page 19 4.3.7 Special programmes Rinse hold If you are not going to unload your clothes For specific applications, select any of the immediately after the programme ends, you can use following programmes. rinse hold function to keep your laundry in the final •...
-
Page 20: Functions/Programmes Selected By Pressing The Function Buttons For 3 Seconds
4.3.10.1 Auxiliary functions • Child Lock You can prevent children from tampering with Prewash • the machine by using the Child Lock feature. A Prewash is only worthwhile for heavily soiled Thus you can avoid any changes in a running laundry. - Page 21 If you want to change the time during countdown: • AntiCrease+ Turn the programme selection knob to cancel the If you press and hold the auxiliary function button delayed end time function, and then set the desired 3 for 3 seconds, this function will be selected time again.
-
Page 22: Loading Door Lock
programme flow while the programme is running. To do this, the change you are going to make must be something that will be carried out after the programme step that is running. If the change is not suitable, relevant lights will flash 3 times. INFORMATION •... -
Page 23: Cancelling The Programme
Changing the auxiliary function, speed and 4.3.17 End of programme temperature At the end of the programme, “End” will be displayed. Depending on the step the programme has reached, you can cancel or select auxiliary 1. Wait until the light of the loading door goes functions. -
Page 24: Maintenance And Cleaning
4.4 Maintenance and cleaning INFORMATION Service life of product extends and frequently • Foreign metal substances will cause rust experienced problems will be reduced if it is stains in the drum. Clean the stains on the cleaned at regular intervals. drum surface by using cleaning agents for 4.4.1 Cleaning the detergent drawer stainless steel. -
Page 25: Draining Remaining Water And Cleaning The Pump Filter
3. Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under running water. 4. Replace the seals and filters carefully and tighten their nuts by hand ensuring there are no leaks. -
Page 26: Troubleshooting
5 Troubleshooting Loading door cannot be opened. • Loading door lock is activated because of the water level in the product. >>>Drain the water by running the Pump or Programmes do not start after the loading door is Spin programme. closed. - Page 27 Washing performance is poor: Laundry turns gray. (**) Washing machine does not rinse well. • Insufficient amount of detergent has been used over a long • The amount, brand and storage conditions of the detergent period of time. >>>Use the recommended amount of used are inappropriate.
- Page 28 Too much foam forms inside the product. (**) • Improper detergents for the washing machine is used. >>>Use detergents appropriate for the washing machine. • Excessive amount of detergent is used. >>>Use only sufficient amount of detergent. • Detergent was stored under improper conditions. >>>Store detergent in a closed and dry location.
- Page 29 If you have purchased an American style Fridge freezer, the standard guarantee starts from the date of original purchase of the product, and lasts for a period of twenty four (24) months unless Beko plc (the “Manufacturer”) agrees to extend the guarantee for the product in writing.
- Page 30 If you are resident in the Republic of Ireland, this guarantee will be governed by Irish law and the Irish courts will have jurisdiction. This guarantee is provided by Beko plc. Beko House, 1 Greenhill Crescent, Watford, Hertfordshire. WD18 8QU. Beko plc is registered in England and Wales with company registration number 02415578.
- Page 31 Beko Free standing appliances come with a 12 month parts and labour guarantee as standard, Beko Built-in appliances come with a 12 month parts and labour guarantee as standard. This is extended to 24 months, free of charge, upon registration of the appliance. When you register your appliance for additional guarantee, you will automatically activate the ProSmart Motor 10 year guarantee.
- Page 32 Send us a secure message through our online contact us form. Please visit our website, click Contact Us and choose a product support topic from the list of options. Complete the required details and click send message. Product registrations For UK registrations please visit beko.co.uk/register and for the Republic of Ireland visit beko.ie/register.